Tender For Estimate For Reconstruction Of Kotbhai Disty From Rd 127500 To 134342 By Laying Pipeline
Tender Value
26.08 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
10 days left
EMD
52179
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sri Muktsar Sahib → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Reconstruction Of Kotbhai Disty From Rd 127500 To 134342 By Laying Pipeline
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in Soil type) using Hydraulic Excavator CK 90 with hydraulic excavator of0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.(6.19) |
| 2 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within lead of 30 meters.(6.6) |
| 3 | Rehandling of Earthwork (CSR chapter 6 note no. 2) |
| 4 | Extra for earthwork for puddling work. [CSR item No. 6.2(f)] |
| 5 | PCC 1:3:6 (M-10) nominal mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by viberation i/c curing for 14 days as per drawing and technical specification. |
| 6 | Laying RCC M-20 for solid slab superstructure using batching plant, Transit mixer and concrete pump including cenetering & shuttering laid in position complete in all respects. (upto 5 m height) |
| 7 | Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe-500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC includingbending and placing in position complete. |
| 8 | Centering & Shuttering for faces of walls, partitions, retaining walls, & the like (vertical or batening including attached pillasters butresses etc when curved).(9.3) |
| 9 | Bending and fixing iron rungs on lined slopes as per IS code:; 3873-1993 (CSR item No. 19.17) |
| 10 | Extra for providing 1:2 cement sand mortar on tytone rubber joint of RCC pipes having sockets extended out of barrel, in trenches including facing trowelling and finishing the joints at the angle of 45 degree with faces of socket keeping joints wet till cured, testing the pipe joints for leakproof and making good all leakage and defects as per specifications.(CSR Item no 29.47 II/j |
| 11 | Laying cement water slurry 1:3, with cement @ 2.25 kg/sqm as on prepared side slopes before laying concrete on side slopes.(19.12) |
| 12 | Providing and laying cement concrete lining 10cm thick or less laid manually for sleepers channel using cement concrete M-15 with cement content 325kg/cum mixed in automatic computerised batching mixing plant and transported to site in transit mixer with an average lead of 1 km |
| 13 | Shuttering for faces of Concrete lining on side slopes and bed complete in all respect as per design / drawing and PWD specifications.(9.1) |
| 14 | Providing Lowering, jointing and cutting of RCC pipes 150 mm dia for air vent pipeinto Trenches and laying same to correct alignment ( @2.50 metre / No) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender