Tender For Supply And Installation Of New Fire Extinguishers For Various Buildings In P.U. C Us, Sector-14 And 25, Chandiagrh.

Sharing tender

Tender for Supply And Installation Of New Fire Extinguishers For Various Buildings In P.U. C Us, Sector-14 And 25, Chandiagrh. , Supply Of New Fire Extinguishers , Supply Of 6Kg Capacity Fire Extinguisher Abc Type To Be Filled With 90% Mono Ammonium Dry Chemical Phosphate Powder Suitable For Class A,B,C Fires And Electrical Hazards, High Quality Corrosion Resistant Steel Cylinder With Durable Powder Quoted Finished , High Pressure Discharge Nozzle With Safety Label, Engraved Identification Detail Of Manufacturer Name, Capacity, Year Of Manufacture, Test Pressure With Bis Confirms To Is:4308:2019, With Stored Pressure Type, Ugts Pressure Guage, Gross Weight 8.90Kg, Empty Weight 2.9Kg, Epdm Pipe, Height Up To 530Mm, Diameter 150Mm(+/- 10Mm), Discharge Time 24 Seconds, Controllable Discharge Mechanism, Jet Range 5.0M, Average Discharge 92%, A Rating-6A, B-Rating 183B, Deep Drawn & Co2 Mig Welding, Epdm Rubber Hose With Aluminium Clamp, Inside Epoxy Powder Coated, Outside Pure Polyester Powder Coated(Uv Resistant), Brass Forged Valve With Safety Pin Of Ss, Made Up Of 1.6Mm Thick Metal Sheet , Nrv Valve, Operating Temperature -30 Degree C To +60 Degree C, Service Pressure 15 Bar, Test Pressure 35 Bar Approved Is: 15683:2018.Warranty Of 3 Years(The Fixing Of Cylinders Shall Be Free Of Cost).Complete In All Respects To The Entire Satisfaction Of Engineer In Charge. (Ref:- N.S.) , Supply Of 4.5Kg Capacity Fire Extinguisher Co2 Type With 99.9% Pure Co2 Gas Confirms To Is:15222. Gross Weight 16.40Kg, Empty Weight 11.9Kg, Control Discharge Mechanism Fitted With 1.0M Wire Braided Hose & Flat Horn With Diffuser Nozzle For Dispersed Discharge Of Co2, Discharge Time 12 Sec, Average Discharge 95%, Applicable On Class B, C And Electrically Started Fire, Fire Rating 55B, Internal Coating Is Not Applicable & External Coating Is Of Enamel Spray Painting, Powder Coated Handle, Valve Confirm To Is:3224 Isi Marked, Co2 Cylinder Construction: Hot Spinning By Seamless Pipes (Epdm) & Bearing Isi Mark, Body Confirms To Is:7285 And Peso Approved, Extinguishers Confirmed To Is: 15683:2018 And Isi Marked. Complete In All Respects To The Entire Satisfaction Of Engineer In Charge.(Ref:- N.S.)