Tender For Annual Maintenance Of Façade Lights, Flood Lights And Mono Coloured Lights Installed At Underpass Noida To Gr. Noida Expressway From Noida Gate Sector-14A To Greater Noida Border
Tender Value
67.16 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
10 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
2832
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance Of Façade Lights, Flood Lights And Mono Coloured Lights Installed At Underpass Noida To Gr. Noida Expressway From Noida Gate Sector-14A To Greater Noida Border
BOQ
| Sl. No. | Item Description |
| 1 | Location and pin pointing of LT Cable fault exposing the same in the underground LT Cables including digging of trench upto the depth of the cable, cutting the faulty cable and sealing of the faulty cable and sealing of the faulty Cable, by providing fault location machines with Operator (Cable fault locator) (AOR) |
| 2 | Location and pin pointing of 11kv HT cable fault exposing the same in the underground 11 KV cables including digging of trench upto the depth of the cable, cutting the fault cable and sealing of the faulty cable and sealing of the faulty cable, by providing fault locator machines with operator (Cable fault locator) (AOR) |
| 3 | Location and pin pointing of LT Cable fault exposing the same in the underground LT Cables including digging of trench upto the depth of the cable, cutting the faulty cable and sealing of the faulty cable and sealing of the faulty Cable, by expert technical staff. (AOR) |
| 4 | Repairing of 11kv Fuse wire/Jumper i/c supply & fixing of required size conductor, fuse wires of 11kv Line/DP Structure of Transformer by taking shutdown from UPPCL Department with all safety instruments like-safety belt, Gloves, Shoes and other necessary items(AOR) |
| 5 | Taking out existing CC interlocking paver blocks from footpath/ central verge. Including removal of rubblish etc. disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-charge.(AOR) |
| 6 | Laying old cement concrete interlocking paver blocks of any design / shaper laid in required line, level, curvatur, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocks shall be supplied by the department free of cost). (AOR) |
| 7 | Cement Concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 4.2.1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR, UPLNV, I No 5.09/ S.No 279 |
| 8 | Cement Concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8.4.1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR, UPLNV, I No 5.09/ S.No 281 |
| 9 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS No. 501 . a) 4 Sqmm x 3 core |
| 10 | b) 6 Sqmm x 3 core |
| 11 | c) 16 Sqmm x 4 core |
| 12 | d) 50 Sqmm x 3.5 core |
| 13 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making onnection etc. complete in all respect as per direction of the Engineer-Incharge. PS No. 504. a) 4 Sqmm |
| 14 | b) 06 Sqmm |
| 15 | c) 16 Sqmm |
| 16 | d) 50 Sqmm |
| 17 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 KGs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PS 725 (A) |
| 18 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 KGs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PS 725 (B) |
| 19 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects. PS No. 716 |
| 20 | S/making of Straight through joint suitable for 185 Sqmm x 3 core 11 KV XLPE cable as per ISS & complete in all respects as per direction of E/I. (UPERC P-29) |
| 21 | Supply of Fixing of 15KVA Servo Stabilizer300-480/400V 3 Phase Digital Micro Controlled Copper Wound Oil Cooled Indoor Type With First Filling of Oil as per IS 335 for Voltage Range 300-480V. Complete in all respects as per direction in-charge-engineer.(AOR) |
| 22 | Demolisihing cement concrete manually/ by mechanical means including disposal of material within 50 maters lead as per direction of Engineer- in- charge Nominal concrete 1.3.6 or richer mix (i/c equivalent design mix) (AOR) |
| 23 | Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (DSR 18 9.2.3) |
| 24 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (DSR 18 9.3.2) |
| 25 | S&F of 200 Amp 4 pole MCCB (25 KA) Thermal Magnetic release PS 1021(F) CAT A |
| 26 | S&F of 100 Amp 4 pole MCCB (25 KA) Thermal Magnetic release PS 1021(C ) CAT A |
| 27 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, Complete in all respect. PS No-807 (f) 40 A TPN |
| 28 | Supply of helper Complete in all respect. 6 Nos @ 25270.00x6 = 151620.00 |
| 29 | S/F of 11 kv, 100 Amp, Drop Fuse set Channel type 3 Nos. (AOR) |
| 30 | S/F of 11 kv TPMO relco/Rama make 9 Nos insulator of jai shree /BHEL make complete in all respects. UPERC P no- 48 I No. 13 |
| 31 | Repair of 63/100 KVA Transformer incl. changing of HV & LV Coil, Bushing, Gasket & Fresh Transformer oil without returning of old & unservicable material. Complete in all respect as per direction of E/I. (AOR) |
| 32 | Dis/Re-fixing of 63/100 kva transformer with connection loading & unloading, cartage charge from site to repairing at worshop complete in all respects as per direction of E/I (AOR) |
| 33 | S/F of 11 KV Disc insulator 70 KN and fitting B&S heavy duty with clamp of cross arm fixed on HT Pole BHEL/Jai Shree/WS/RR/Make UPERC P-43 |
| 34 | S/F of 11 KV pin 12\\" long with insulator of Jai Shree/HBHEL on cross arm fixed on HT pole including all T/P etc UPERC P-39 Annexure-16 |
| 35 | Supply of 185 sq. mm 3 core high conductivity aluminum strand compacted circular conductor XLPE armoured 11 KV(E) Cable neutral earthed system confirming to IS 7098-Part-II (1985) with latest amendment complete in all respects as per direction of E/I. . (AOR) |
| 36 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.DSR 2018 8.3.2. a) Above 120 sq. mm and upto 400 sq. mm |
| 37 | Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respects. PS 627 |
| 38 | Supplying and making oudoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XPLE aluminum conductor cable of 11 kv grade as required : (UPERC P-41 ) 185 Sqmm |
| 39 | Supply and fixing of PVC corrugated conduits of 20 mm outer dia MTR. on surface as sleeving including all labour, T&P etc. required for proper completion of work as per direction and satisfaction of Engineer in charge. (PS No-185(II) |
| 40 | S & F surface/Flush mounting 6ways TPN distribution board without additional board without MCB complete in all respect, as directed at site by Engineer in charge. PS No-1027 |
| 41 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. PS.No. 1413 A CAT-AAA |
| 42 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm (DSR 18 1.17.3.2) |
| 43 | 3 x 1.5 sq. mm (DSR 18 1.17.3.3) |
| 44 | 3 x 2.5 sq. mm (DSR 18 1.17.3.12) |
| 45 | 3 x 4 sq. mm (DSR 18 1.17.3.21) |
| 46 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. required .(AOR) |
| 47 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. PS No-812 (B) Incoming 200 AMP. MCCB-1 Nos. a) Outgoing 63 Amp. MCCB-3 Nos. (i) Cat. A Pannel Cubicle Type |
| 48 | Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect. PS No. 1417 |
| 49 | Supply and fixing of recess/surface mounting round 24 to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set complete in all respect. PS No- 1405 |
| 50 | S&F of 80 to 100 Amp 4 pole MCCB (16 KA) Thermal Magnetic release PS No-1021(A) |
| 51 | S&F of 63 Amp. DP MCB (10 KA) PS No- 1011 |
| 52 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve PS No-1002 |
| 53 | Wiring point for light in pvc conduct with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit., complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed. PS. No.121 C |
| 54 | Wiring point for fan /fresh air fan (light duty exhaust fan) in pvc conduct with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect.. PS. No.123 C |
| 55 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.. PS. No.1139 |
| 56 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 70 to 90 Watt. Confirming to IP 65 protection complete in all respect. PS No. 1452 Cat AAA |
| 57 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect PS No. 1454 Cat AAA |
| 58 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect PS No. 1406 Cat AAA |
| 59 | Supply and fixing of heavy duty cadmium plated copper connector with end plate complete in all respect. Four way connector HKM 100 PS No. 1128 |
| 60 | Repairing of LED Strip 5 W/M with life L 70/40000 boring hours of reputed LED Make Saffran/White/green datachabe in 1M suitable for 240V AC 30 m of strip for out door use . Complete in all respects as per direction of E/I (AOR) |
| 61 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 1 run of cable DSR 2018, 1.53.1 |
| 62 | Supply of factory wired integral LED Coloured light luminaries 50W with die cast aluminium housing built with driver set suitable for 50Watt confirming to IP 65 protection complete in all respects as per direction of E/I. (AOR) |
| 63 | Supply of factory wired integral LED Coloured light luminaries 100W with die cast aluminium housing built with driver set suitable for 100Watt confirming to IP 65 protection complete in all respects as per direction of E/I. (AOR) |
| 64 | Providing & fixing of exterior signage to be fixed on top with help of MS frame, sinage to be made with help of 3mm acrylic 040 in cut of lazer to be inserted 3 mm ACP (Matching colour of base) with router cut. The signage shall illuminated with Moudules and power supply. Make of Modules and power supply atleast 2 yrs guarantee Complete in all resects. (AOR) |
| 65 | Supply and fixing of LED Light Multi Colour (Amber, Blue, Green, Red, Pink, White, Yellow) Imported 6Watt, 60 LED String light, 12 Mtr IP-20 with 12 Mtr length incl. labour and Transportation including proper connection. Complete in all respects a per direction of E/I. (AOR) |
| 66 | Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.3 output (1output per phase) and suitable for three phasesupply DSR Electrical 218/I-15.4.3 |
| 67 | fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. PS No. 1423 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender