Tender For Repair/ Maintenance To Kitchen And Toilets With Plumbing Work And Sanitary Fittings In E Type Qtrs & Sh Under Age B/R-Ii Kanchanbagh Hyderabad.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
14 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Kitchen And Toilets With Plumbing Work And Sanitary Fittings In E Type Qtrs & Sh Under Age B/R-Ii Kanchanbagh Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down door chowkhat of area exc 1.5 sqm but not exc 4 sqm each with shutter (without taking off shutter from the frames) complete all as directed. |
| 2 | Taking down door chowkhat of area n exc 1.5 sqm each with shutter (without taking off shutter from the frames) complete all as directed. |
| 3 | Taking down shutter of any description of area exc 1 sqm but n.exc 2 sqm complete all as directed. |
| 4 | S&F factory made solid PVC door frame of size 50x47 mm made out of 5 mm thick plain colour PVC sheet reinforced with M.S. Square tube 19mm x 19 mm of gauge complete all as specified and as directed.Make : Rajshree |
| 5 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed.Make : Rajshree or equivalent |
| 6 | Supply & fixing of UPVC ventilators with top hung glazed and wire mesh shutters made out of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutter fixed with 3 mm thick frosted glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old down old ventilator complete all as specified all as directed. |
| 7 | Supply & fixing of UPVC windows three track sliding window with two glazed and one wire mesh sliding shutters of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old down old window complete all as specified. all as directed . |
| 8 | S&F framed work such as angle iron, grills, gratings, Gates etc., with ends of bars shouldered and/ or riveted, or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work conforming to Fe 290 Gde E-165 including dismantling existing old MS work complete all as directed. |
| 9 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 Cm in width or grith and applying two coats of synthetic enamel paint over one coat of Zinc chrome primer complete all as directed. |
| 10 | M&L non skid ceramic coloured rectified tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed bed complete all as directed. |
| 11 | M&L for glazed ceramic tiles of size 300x450x7mm mmthick vertical surfaces such as skirting/dado jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid on and including 10mm thick backing coat in CM 1:3 including dismantling existing tiles along with backing coat complete all as directed. |
| 12 | M&L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone and cutting, polishing, laid on and including 15mm thick screed bed in cement mortar 1:6 including taking down existing stone slab/ tile complete all as directed. |
| 13 | M&L for pain cement concrete 1:5:10 type E2, (using 40 mm graded stone aggregate) as in filling of sunken floors including digging out and removing sunken floor filling and depositing the same at a distance not exceeding 250m away from the outer edge of building including demolition complete all as directed. |
| 14 | M&L for 10mm thick rendering on concrete/brick surfaces in CM 1:4 duly mixed with water proofing compound @ 2% by weight of cement and finished even and smooth without using extra cement complete all as directed.Note : Water proofing compound shall be measured and paid separately. |
| 15 | Supply only integral water proofing compound complete all as directed.Make:- SCOT NO 1/ ACCOPROOF/ IMPERMO |
| 16 | M&L for applying two coats of NITOBOND SBR polymer modified coating to a thickness of 1mm, 1st Coat 1:2:3 (Nitobond SBR Chemical 1 ltr, Water 2 Ltrs, Cement 3 Kg) Second Coat 1:3 (Nitobond SBR Chemical 1 ltr, Cement 3 Kg) applied thoroughly without any traces of dirt or laitance as in sunken floors complete all as directed. |
| 17 | Taking down existing IWC along with its cement concrete bedding and P or S trap and S&F Orissa pattern vitreous china squatting pan white of size 580x440mm with integral footrest (Excluding flushing cistern ) but including concrete bedding and P or S trap as required including PVC flush pipe, making good the disturbed surfaces to match the adjoining complete all as directed. |
| 18 | S&F in repairs 10 ltrs capacity PVC flushing cistern high/low level with inlet, ball valve, float, handle including fitting and fixtures , providing connections to WC and flush pipe without any damage to the existing fittings complete all as directed.(Make : Prayag or equivalent) |
| 19 | S&F in repairs 15mm dia bib tap, fancy type, standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 105gms) complete all as directed. (Make : Prayag) |
| 20 | S&F in repairs 15mm dia pillar tap, fancty type, standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 120gms) complete all as directed. (Make : Prayag or equivalent) |
| 21 | S&F in repairs vitreous china wash basin, white, flat back of size 550x400 mm excluding taps, chain and plug and porcelain stopper but including CP waste coupling & brackets and fixed complete all as directed. (Make : Cera or equivalent) |
| 22 | S&F in repairs towel rail 450mm long of PTMT fixed with and including chromium plated brass screws (Minimum weight 170gms) |
| 23 | S&F in repairs stainless steel sink of 1.0mm thick for kitchen with out drain board of overall size 495x420mm & bowl size of 410x330mmx160mm including all necessary fixing arrangements as required at site complete all as directed. |
| 24 | S&F Rotational moulded tripple layer white colour polyethylene water storage tank of 1000 litres capacity, double layered, cylindrical, vertical with closed top hoisted including taking down existing water tank complete all as directed. (Make : Sintex or equivalent) |
| 25 | S&F in repairs brass chromium plated shower rose with swivel joints 125mm dia with 18mm dia chromium plated pipe complete all as directed. (Make : Prayag or equivalent) |
| 26 | S&F in repairs stainless steel soap dish fixed to walls complete all as directed. |
| 27 | S&F in repair wall mixture 3 in 1 system with telephonic shower cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as directed.(Make : PIS 70H of Prayag or equivalent) |
| 28 | S&F in repairs fancy type 15mm dia stop valves /angle cock / concealed stop cock cast copper alloy chromium plated screwed down high pressure with crown or capstan head screwed both ends for iron pipe complete all as directed. (Make :Prayag/Seiko) |
| 29 | S&F in repairs 15mm dia long body bib taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as directed. (Make :Prayag/Seiko) |
| 30 | S/F in repairs 15 mm dia pillar tap cast copper alloy with crown or capstan head , chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as directed. (Make :Prayag/Seiko) |
| 31 | S&F in repairs Classic 2 in 1 Bib Cock of 15mm dia with wall flange specifications complete all as directed.(Cat No : 6712 of Prayag or equivalent) |
| 32 | S&F in repairs steel finish jet spray Health faucet with 1 meter shower tube and clamp complete all as directed(Cat No ; BEA 88 of Prayag or equivalent) |
| 33 | S&F 15mm dia medium grade GI tubing with all fittings and fixtures fixed to walls, ceilings etc including taking down existing pipe complete all as directed. |
| 34 | Taking down 15mm dia GI tubing and cleaning and refixing with all fittings and fixtures fixed to walls, ceilings etc complete all as directed. |
| 35 | S&F 20mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing pipe complete all as directed. |
| 36 | Taking down 20mm dia GI tubing and cleaning and refixing of with all fittings and fixtures fixed to walls, ceilings etc complete all as directed. |
| 37 | S&F Stainless steel plate rack of size 910x 750x 300mm including taking down existing steel rack complete all as directed.(Make : Prayag or equivalent) |
| 38 | S&F in repairs CP grating of size 100/110 mm with or without hole including fixing with white cement complete all as specified and as directed. |
| 39 | Supply and fix in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as directed. (Make : Prayag) |
| 40 | S & F TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed. |
| 41 | M&L precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate ) as in landings, cover slabs for man holes etc.) chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces including necessary form work and demolition of existing old concrete complete all as directed.Note: Reinforcement shall be measured & paid seperately. |
| 42 | S&F in repairs vitreous china white wash down water closet pan, pedestal pattern including fixing bolts, 'P' or 'S' trap, plastic water closet seat and cover with recessed bottom with MS CP hinging device (excluding flushing cistern and flush pipe) complete all as directed. (Make : Cera or equivalent) |
| 43 | Supply and fix in repairs Godrej Mortice lock complete set 7 levers with handles and two keys. |
| 44 | S&F in repair corner glass shelf with bracket of size 300mm wide with SS railing complete all as specified and directed. |
| 45 | S&F in repair Hasp and staple 100 mm size, mild steel, safety type, stove enamelled black, including bolt to hinge plate. |
| 46 | S&F in repair stainless steel peg set of 06 hooks complete all as directed |
| 47 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed. |
| 48 | Grinding or polishing of old stone surface / terrazo tiles and toping of any type including cutting rubing and filling the joint with cement and pigment to match the shade of slab complete |
| 49 | Cleaning and removal of rust on existing CP fittings with chemical polish complete all as specified and as directed. |
| 50 | S&F in repair Cabinet mirror complete all as specified and as directed. |
| 51 | S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cum manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for cabinet shutter/ Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing. (Make : Rajshree or equivalent) |
| 52 | S&F 100 mm size Stainless Steel handle complete all as specified and as directed by Engr -in - Charge. |
| 53 | M &L for 50 mm magnetic catches and fixed complete all as specified and directed by Engr-in- Charge. |
| 54 | S&F 38mm size Stainless Steel Piano hinges complete all as specified and as directed by Engr -in - Charge. |
| 55 | S&F stainless steel knobs complete all as specified and as directed |
| 56 | Stainless steel modular type baskets, using stainless steel of grade 304, of any shape and size as directed with side sliding roller clip, one on each side, fixed with steel screws, complete all as specified and directed. |
| 57 | Telescopic chanels to be fixed to stainless steel baskets, size not less than 350mm when it is closed, complete all as specified and directed.MAKE:- Godrej / Heittech or techno-commercially equivalent make as approved by GE Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender