Tender For Misc Repair Maintenance Of Electric And Water Supply Installation, Improvement Of Earthing Infra, Flood Lighting In Vip Area And Certain Location In Bowenpally/ Kompally Area Under Age Em I Of Ge(U) Secunderabad
Tender Value
48 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
18 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Misc Repair Maintenance Of Electric And Water Supply Installation, Improvement Of Earthing Infra, Flood Lighting In Vip Area And Certain Location In Bowenpally/ Kompally Area Under Age Em I Of Ge(U) Secunderabad
BOQ
| Sl. No. | Item Description |
| 1 | Material and Labour in repair /replacement for earthing complete with Copper earth plate electrode 60cm x 60cm x 3 mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to the Copper earth strip 20 x 3 mm dia, by means of nuts, bolts, check nuts and washer etc of copper and earth lead protected by provision of GI pipe medium grade 40mm bore from earth electrode to test point including proven of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion all as directed.Note :- The cost of 7.5m long copper earth strip of 20x3 mm and protection pipe of 40mm bore GI light grade is deemed to be included in quoted unit rate. |
| 2 | Supply, fabrication, and installation in repair /replacement of retro-reflective glow sign board for MES office/work, comprising a double-sided sign board of 2 mm thick aluminium composite panel (ACP) with 2 mm aluminium skin, size 1600 mm x 900 mm. Includes high-intensity prismatic (HIP) Type IV retro-reflective sheeting (conforming to IRC:67-2012) with green background and computerized cut vinyl lettering (white, reflective) as specified by Engineer-In-Charge, designed to reflect light when illuminated by external sources (e.g., vehicle headlights). Supported on two 40 mm diameter mild steel (MS) pipes (3 mm thick, IS:1239 compliant), 3.5 m height above ground, with base plates (150 mm x 150 mm x 6 mm) and anchor bolts, painted with two coats of anti-corrosive primer and two coats of enamel paint (green). Includes PCC M15 (1:2:4) foundation for each pole (0.4 m x 0.4 m x 0.6 m) with excavation, reinforcement (4 nos. 8 mm dia. MS bars, IS:432), formwork, and curing. Includes fixing of sign board with stainless steel bolts, nuts, and washers (M10, IS:1367). Complete job including alignment, levelling, and compliance with IS standards and MES specifications, as per Engineer-In-Charge. |
| 3 | Supply, fabrication, and installation in repair /replacement of retro-reflective glow sign board for MES office/work, comprising a double-sided sign board of 2 mm thick aluminium composite panel (ACP) with 2 mm aluminium skin, size 2000 mm x 1500 mm. Includes high-intensity prismatic (HIP) Type IV retro-reflective sheeting (conforming to IRC:67-2012) with green background and computerized cut vinyl lettering (white, reflective) as specified by Engineer-In-Charge, designed to reflect light when illuminated by external sources (e.g., vehicle headlights). Supported on two 40 mm diameter mild steel (MS) pipes (3 mm thick, IS:1239 compliant), 3.5 m height above ground, with base plates (150 mm x 150 mm x 6 mm) and anchor bolts, painted with two coats of anti-corrosive primer and two coats of enamel paint (green). Includes PCC M15 (1:2:4) foundation for each pole (0.4 m x 0.4 m x 0.6 m) with excavation, reinforcement (4 nos. 8 mm dia. MS bars, IS:432), formwork, and curing. Includes fixing of sign board with stainless steel bolts, nuts, and washers (M10, IS:1367). Complete job including alignment, levelling, and compliance with IS standards and MES specifications, as per Engineer-In-Charge. |
| 4 | S&F in repair /replacement of old unsv light with Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting of capacity 200 watt complete all as specified and directed. Make : Havells, Crompton, Bajaj, Fortune Art, Everyday, Orient, Philips Or as approved by GE . |
| 5 | S&F in repair /replacement of old unsv light with Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting of capacity 300 watt complete all as specified and directed.Make : Havells, Crompton, Bajaj, Fortune Art, Everyday, Orient, Philips. or as approved by GE . |
| 6 | S & F in repair / replacement with old Earthing with chemical Earthing by Advance encapsulated compound based CPRI tested maintenance free, pipe-in-pipe technology upgraded (Zinc & Alloy Coated), ZINC COATED (80-100) microns with pure Zinc (99.9%) & ALLOY COATING (200-250)microns. Earthing System confirming IS 3043.The outer and inner pipe should be 89mm(wall thickness of 3.2mm) & 42mm(wall thickness of 3.2mm) dia, 3mtrs Length, Zinc coated with additional special Alloy coating 300mm on the topside for additional protection of the Terminal. A groundbreaking corrosion resistant Crystalline Conductive Compound (CCC) is filled and compacted in the cavity within the pipes to enhance the electrodes performance. i.e. . the pipes should not disintegrate or collapse when outer pipe corrodes. The inner pipe should be extended with terminals for connectivity, The job includes digging the pits and refilling the same by BARON ELECTRODITE Back Fill compound (Ground Enhancer), the BFC should be eco friendly it should not contain environmentally hazardous material/metal having ROHS, . The earth pit should be provided with a FRP or Polyplast/PCC earth pit cover for protection and safe guard of terminals. In areas where soil condition is bad, GOOD EARTH i.e. BLACK COTTON OR MOISTURES NORMAL SOIL is to be arranged to fill the excavated pits by mixing the arranged soil with BFC 3 bags ELECTRODITE (25kgs/bag) & TERRION(10kgs/bag) for installation of earth electrode. The material should have good electrical conductivity & anti corrosion property in wide range of soil conditions. The buried Conductor Copper is to be covered by 50mm thick layer of ELECTRODITE for additional protection of conductors & better conductivity to lower the resistivity of soil & bring down earth resistance. Make As approved By GE |
| 7 | S&F in repair/ replacement of Lighting arrestor rod with ESE type lighting arrestor with radius of protection up to 55-60 meter height not less than 321 mm, width range 100 mm to 105 mm,dia of rod 18-20 mm confirming to NFC 17-102 complete all as specified and directed. |
| 8 | M&L in repair/ replacement for Earth Bars 6 way With Twin Disconnecting Link Made out of 50 x 6 mm pure copper bar pre-fitted on epoxy powder coated metal or plastic base mounted on insulators . |
| 9 | Supply and fixing of PVC covered high conductivity electrolytic grade copper tape of size 20 mm × 3 mm, suitable for earthing and lightning protection system, laid,fixed on wall/roof/surface with approved saddles/clips, screws, washers, raw plugs and all fixing accessories, including cutting, bending, dressing, testing of electrical continuity and making joints by exothermic welding wherever required, complete all as specified and as directed by Engineer-in-Charge. . |
| 10 | Supply and fixing of heavy duty PCC earth pit chamber of internal size 450 mm × 450 mm with removable precast PCC cover slab, suitable for inspection and maintenance of earth electrode including excavation in any type of soil, PCC bed, PCC chamber wall, PCC cover slab with lifting arrangement, cement plaster to exposed surfaces, curing, backfilling, levelling with surrounding ground and disposal of surplus excavated earth, complete all as specified and as directed by Engineer-in-Charge. |
| 11 | S&F in repair /replacement of old unsv light with Solar Street Light of capacity 20 watt is made with High Efficiency Mono Crystalline Solar PV Module, Lithium Ferro Phosphate battery with in-built BMS technology, High Efficacy LED, MPPT Solar Charge Controller and Aluminium Extruded body & is specially programmed to automatically control the dimming and brightness of light, which increases the backup time. Make : Havells, Crompton, Bajaj, Fortune Art, Everyday, Orient, Philips. Or as approved by GE . |
| 12 | S&F in repair /replacement of old unsv light with Solar Street Light of capacity 40 watt is made with High Efficiency Mono Crystalline Solar PV Module, Lithium Ferro Phosphate battery with in-built BMS technology, High Efficacy LED, MPPT Solar Charge Controller and Aluminium Extruded body & is specially programmed to automatically control the dimming and brightness of light, which increases the backup time. Make : Havells, Crompton, Bajaj, Fortune Art, Everyday, Orient, Philips. Or as approved by GE . |
| 13 | S&F in repair / replacement of old unsv light with energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 CCT 5700 k of capacity 60 Watt.Make : Havells, Crompton, Bajaj, Fortune Art, Everyday, Orient, Philips. Or as approved by GE . |
| 14 | S&F in repair / replacement of old unsv light with energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 CCT 5700 k of capacity 45 Watt. Make : Havells, Crompton, Bajaj, Fortune Art, Everyday, Orient, Philips. or as approved by GE . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender