Tender For Repair To Chain Link Fencing Gate And Compound Wall Etc At Zone Ii And Iii At Lansdowne
Tender Value
14.90 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
19 days left
EMD
29800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Chain Link Fencing Gate And Compound Wall Etc At Zone Ii And Iii At Lansdowne
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or R.C.C) any section, including taking out embedded portion from natural ground and making good disturbed ground complete all as specified and directed. |
| 2 | Dismantling of fencing wire mesh, any type complete all as specified and directed. |
| 3 | S &F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 4 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 5 | Supply only Chain link MS galvanisd fencing, anysize or type complete all as specified and directed. |
| 6 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 7 | S&F mild steel screw bolts (machine made) 5 to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed. |
| 8 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed. |
| 9 | S&F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts including, securing or tying at crossings with and Provision of galvanised mild steel wire, staples or steel pins etc as directed( each line wire to be measured) complete all as specified and directed. |
| 10 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 11 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone agg) as in foundation, filling and mass concrete etc complete all as specified and directed. |
| 12 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 13 | M&L for walling of random rubble masonary, well bonded, bedded and solidly hearted, brought upto courses, built in cement mortar (1:6) complete all as specified and directed.Note :- Only quantity of PCC bond stone to be deducted from quantity of random rubble masonary. |
| 14 | Description same all as item No. 13 above but except stone complete all as specified and directed. Note :- Old retreived serviceable stone under demolition item shall be used. |
| 15 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surfacae not exceeding 40mm to face stone for Lime or sand stone and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses complete all as specified and directed. |
| 16 | M&L for raised pointing in cement mortar (1:4) to random rubble or polygonal rubble masonary uncoursed or brought upto course complete all as specified and directed. |
| 17 | M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb/ benching/ coping, bed plates, for fixing of hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. |
| 18 | S&F repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and laid in trenches or in floor or fixed to wall complete all as specified and as directed. |
| 19 | Providing precast cement concrete 1:3:6 type C1 (using 20 mm graded stone agg) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling).corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and as directed. |
| 20 | M&L Hand packing (any thickness) of broken stone or boulders at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed. |
| 21 | M&L for brick work with old size full brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. |
| 22 | M&L for 15 mm thick plastering on brick work or concrete surfaces, in CM (1:4), surface finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. Note :- The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 25 | S&F framed work as in doors or gates of angle iron or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete. No claim whatso ever shall be entertained by Govt on this account. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender