Tender For Repair/ Maintenance To Mes Installations With Replacement Of Sanitary Fittings,Flooring,Plastering,Rolling Shutters, Joineries And Certain Misc B/R Works At Dmrl, Atc Devatalagutta, Rcma (Mat), Dsc Line Atc Devatalgutta And Pcda Under Age
Tender Value
30 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
21 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Mes Installations With Replacement Of Sanitary Fittings,Flooring,Plastering,Rolling Shutters, Joineries And Certain Misc B/R Works At Dmrl, Atc Devatalagutta, Rcma (Mat), Dsc Line Atc Devatalgutta And Pcda Under Age B/R -Ii Kanchanbagh,Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutters (without taking off shutters from frame) but each not exceeding 1.50 Sqm |
| 2 | Taking down Chowkats or frames with shutters exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) |
| 3 | Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed |
| 4 | S&F Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 5 | M&L cement concrete type C0, 1:3:6 (using 12.50 mm graded aggregate) for filling in steel frames complete all as directed |
| 6 | S&F factory made solid PVC door frame of size 50x47 mm made out of 5 mm thick plain colour PVC sheet reinforced with M.S. Square tube 19mm x 19 mm of gauge complete all as specified and as directed. |
| 7 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as directed. |
| 8 | S&F 30mm thick flush shutters, solid core construction with block board and plywood face panels, commercial type on both sides including preparation of surface and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as directed. |
| 9 | M&L for preparation of old painted wooden surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed |
| 10 | Supply & fixing of UPVC windows UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and finish the jambs with CM 1:4 complete all as specified. |
| 11 | Supply and fixing factory made uPVC white colour fixed including 4.0mmthick glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto .75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all orners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of equired size and of approved quality all and finish the jambs with CM 1:4 complete as per approved drawing & direction of Engineer-in-Charge. |
| 12 | S&F mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified. |
| 13 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 14 | S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 15 | S&F 150 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, with brass screws complete all as directed. |
| 16 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed. |
| 17 | M&L preparation of new wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying pink primer and Two coat of synthetic enamel paint. |
| 18 | Taking down existing roof treatment of any description, any position with bituminous felt including plaster/loose concrete and removing rubbish to a distance exceeding 500m but not exceeding 1000m and roughening the surfaces of old concrete by picking, scraping, cleaning and washing down with water to remove all dust etc complete specified and directed by Engineer-in-Charge. |
| 19 | M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in padding concrete, coving of vertical junctions on roof top, complete all as directed by Engr-in-charge. |
| 20 | M&L for brushing neat cement slurry with 3 Kg of cement per Sqm over the RCC slab and sides with SBR latex chemical complete all as directed by Engineer -in- Charge. |
| 21 | M&L for rendering 15mm in CM 1:3 (using river sand as Fine aggregate) over concrete surfaces on RCC roof slab and parapets mixed with Dr Fixit by weight of cement as per manufacturer instruction complete surface finished even and smooth without using extra cement shall be carried out complete all as specified and directed by Engr-in-Charge. |
| 22 | Water proofing treatment for terrace/Roof:(i) Cleaning the surface areas thoroughly so that they are free of all contaminants like dirt and laitance & to remove all the loose materials by various mechanical means. Removal of all surface Imperfections, protrusions, loose concrete & filling of cracks using Seal PU or Polymer Modified Mortar in the ratio Seal Crete : Cement : Sand (1 : 2 : 5 ) after \\"V\\" cut groove and fill with PMC mortar, using SBR Latex as the bond coat.(ii) Providing and applying brush applied water based PU dispersed polymer modified Elastomeric liquid membrane, Urethane BTD with Zero VOC to form the membrane in situ at site with 3 layers of monolithic, seam less finish having > 500% elongation The first layer is to be apply primer @ 300 Gms per Sqm and shall act as the prime coat to fill in the cavities. This can be brush or roller applied. For spray application, using any airless spray system with recommended nozzle size at 30:1 at 2 bar pressure. (iii) Providing and applying the second coat @ 1 kg per Sqm using the soft brush, roller or Spray system with the recommended nozzle size on to the primed surface. Providing and applying 45 Gsm Fiber cloth/mesh over the 1 st coat,when substrate till the coat is tacky Providing and applying 3 rd coat @ 1 kg per Sqm to form a homogeneous membrane layer over the roof surface in place. The second coat should be applied perpendicular to the first coat for cross linkage and complete as per the specification.(iv) Top Screed modified with Integral Waterproofing Chemical: Placing a seperation layer of 120 GSM geotextile fabric over the waterproofing membrane and carrying out sloping screed on top of it over the with cement modified @ 0.4% with Manufacturer plast LW+ for waterproofing.Notes: - 1. To be applied by the Rep of manufacturers authorized applicator only. Contractor has to provide manufacturer’s test certificate for the above mentioned Technical parameters and purchase Vrs.2. Roof top to be ensured to avoid water ponding.3. For accessible terrace and inaccessible terrace, 300mm height of vertical surface/ parapet wall to be treated with same specification of slab.Make: STP,Bostik, Berger, Fosroc, Sika, Asian or any other make approved by E-in-C’s Branch for PU based water proofing treatment. |
| 23 | Demolition of un-reinforced cement concrete in floors incl tiles and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance outside MOD land as directed by the Engineer in Charge. |
| 24 | M&L for Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in mass concrete of sub base of flooring/ hard standing. |
| 25 | M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, as in floors/pavings laid over 40 mm thick sand cushioning layer including dismantling existing floor tile of any descrption complete in all respect and all as specified. |
| 26 | M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x22 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile and screed bed of any descrption complete all as directed by Engr-in-charge |
| 27 | S&F Non skid joint less coloured ceramic tiles 7-8mm thick size 300x300 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified incl dismantling of old tiles |
| 28 | M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm thick rendering or bedding layer of cement mortar 1:4 and incl dismantling of old tiles complete all as specified. |
| 29 | M&L for light coloured/double charged vitrified tiles of any design and pattern, 600x600x9 to 10mm thick, as in floor and skirting etc incl 15mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b including dismantling existing tile work with screed bed. |
| 30 | Ditto item no 29 above but as in skirting and vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10 mm thick backing coat of cement mortar 1:4 including dismantling existing tile work with plaster complete all as specified and directed. |
| 31 | M&L for providing and fixing false ceiling with light weight 19mm thick mineral Armstrong tiles of size 595x595mm of model prima fine fissured RH 99 suspended on silhouette profile suspension system of grid made from hot dipped GI steel section notary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx 14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm) x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, all complete at all height as per specification, drawing and incl dismantling old false ceiling all as per direction of Engr in Charge. |
| 32 | M&L for repairs to damage existing false ceiling of any type including replacement of GI hanging wire, channel, Tee and board matching with existing pattern complete all as specified. |
| 33 | Periodical inspection of rolling shutters, checking various parts, greasing/oiling as required to make smooth operation of the rolling shutters by using gear/hand operated including make proper alignment, fixing screw, nut & bolts for fixing loose parts, welding where necessary all as specified n.exc 9 Sqm area complete all as directed.Note : Replacement of parts shall be measured and paid separately. |
| 34 | All as per item No 33 above but area of shutter exc 9 Sqm but not exc 20 Sqm |
| 35 | All as per item No 33 above but area of shutter exc 20 Sqm but not exc 36 Sqm |
| 36 | S&F rolling shutter lathe of 1.25mm thickness including taking down damaged shutter slots. |
| 37 | S&F MS springs suitable for rolling shutters of any size complete incl taking out old one all as directed. |
| 38 | S&F in repairs ball bearing suitable for rolling shutters of any size as ordered complete all as directed. |
| 39 | S&F in repairs safety lever locks mild steel with 4 levers for rolling shutters complete |
| 40 | S&F in repairs steel rolling shutters 1.25mm thickness of laths , without ball bearing as specified including top cover anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type |
| 41 | S&F in repairs steel rolling shutters 1.25mm thickness of laths , without ball bearing as specified including top cover anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle complete |
| 42 | M & L for preparation of old painted steel surfaces of any description over 10cm in width or girth and applying one coat of aluminium paint of any tint all as specified and directed |
| 43 | Dismantling timber scantlings in fillets,rails,posts,rafters,purlins etc under 40 sq cm in section, in any position unframed work. |
| 44 | S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified. |
| 45 | M&L for prepration of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed. |
| 46 | S & F in repairs Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour (ISI Marked) having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 47 | S&F in repairs brass mortice lock 100mm long vertical type 4 levers fixed to shutter with 2 duplicate keys with handles complete all as directed. Make: Godrej/Link/Sheel |
| 48 | S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make onforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, including provision of sheet glass 5.5 mm thick and 12 mm thick particle board prelaminated on both side with decorative choice lamination, 25 micron sun control film, aliminium legs, aluminium galzing channel,beading, including taking down of old one and finish the jambs with CM 1:4 complete all as per architectural drawings and the directions of Engineer-in-Charge. |
| 49 | S&F Powder coated (thickness powder coated not less than 50 micron) aluminium door shutter with frames, aluminium section weighing 0.55kg/mtr incl necessary joining cleats,glazing clips rubber neoprene packing,handles 2nos in each door, hinges 2 Nos/rollers,anodised aluminium snap beading screws, 5.5 mm thick sheet glass with 25 micron sun control film, 12mm thick particle board prelaminated decorative both side, 6 levers lock etc,including takingdown old unserviceable old any type of door and finish the jambs with CM 1:4 complete all as specified and directed |
| 50 | M&L Powder coated (thickness of powder coating not less than 50 micron) aluminium window shutter with frame type/sliding as directed, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aliminium snap beading screws etc including provision of sheet glass 4 mm thick of selected quality and 25 mircon sun control film reflective type sticked to glass pane as per manufacturers instructions,including taking down old unserviceable existing window and finish the jambs with CM 1:4 complete all as per specified and directed. |
| 51 | S&F powder coated aluminium grills of weight between 2.5 to 3 kg/sqm to aluminium window etc incl taking down old grills complete all as directed. |
| 52 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainess steel cover , governing pivot made of mild steel heavy duty complete |
| 53 | S&F in repairs 5.50mm thick glass of colour/ tinted pattern in square / rectangular in aluminium door / window, wooden door and wall panelling complete all as specified and directed |
| 54 | S&F in repairs 12mm thick prelaminated particles board interior grade , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed aluminium door / partition etc complete |
| 55 | Taking down carefully existing aluminium partition, door etc and refixing the same as directed by Engineer -in- Charge including replace damage clip, rubber beading and secure properly loose parts complete all as specified |
| 56 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, properly rolled on glass panes without any wrinkle including removal of existing unserviceable film on windows/doors complete all as directed.Make : GARWARE OR EQUIVALENT |
| 57 | S&F 100 mm size Stainless Steel handle complete all as specified and as directed by Engr -in - Charge. |
| 58 | S&F PVC tiles/ sheet of 3.00 mm thick laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and directed by Engr-in-charge |
| 59 | M&L for cleaning and removing all scale and dirt etc from tanks capacity 500 ltr to 1000 ltr and from mouths of circulating pipes etc by using bleaching powder and writing date with month and year of cleaning by synthetic enamel paint complete all as specified |
| 60 | S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) with P or S trap, white including fixing bolts, plastic water closet seat, White, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device and flush pipe complete all as directed. Make: Parryware/ Hindware/ Cera |
| 61 | S&F in repair viterous china water closet Orissa pattern of 580 mm x 440 mm white with intergral foot rests including provision of P or S trap including connection to flushing pipe and complete making good to floor all as directed. Make:Parryware / HIindware/ Cera |
| 62 | S&F in repairs viterous china WHB white flat back size 550 mm x 400 mm excluding taps and including brackest , waste coupling , waste pipe and PVC connection and including cutting for & pinning in ends of brackets complete all as directed. Make:Parryware/ Hindware/ Cera |
| 63 | S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe. |
| 64 | S&F in repairs brass chromium plated health faucet with 1.2m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe complete all as specified. Make: Hindware or equivalent |
| 65 | S&F in repairs brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directed. ISI marked |
| 66 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed. ISI marked |
| 67 | S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed.ISI marked. |
| 68 | S&F in repairs angle valve fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified.ISI marked |
| 69 | S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed. ISI marked |
| 70 | S&F in repairs 600 x 800mm bevelled edge Mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed. |
| 71 | S&F in repairs 15mm & 20mm GI/PVC small fittings such as socket, elbow, nipple, tee, union, Double Nippel etc for galvanised iron 15mm & 20 mm bore pipe complete all as specified and as directed. Note:- Taking down and refixing of old GI tubing upto 1.5m included in rates. |
| 72 | S&F in repairs 15 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor incl taking down as directed by Engineer-in-Charge. |
| 73 | S&F in repairs 20 mm bore of CPVC pipes SDR 11 & plain fiitings and fixed complete to wall or laid in floor incl taking down as directed by Engineer-in-Charge. |
| 74 | S&F in repairs in repairs 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified, fixed to walls, concealed in wall and ceiling or laid in floor complete all incl taking down as directed by Engineer-in-Charge. |
| 75 | S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls including all fittings like T/Y junctions etc.. complete all as directed |
| 76 | S & F in repairs PVC (SWR) bends 110mm bore any radius with accessible door complete all as directed |
| 77 | S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls as waste pipe including all fittings like T/Y junctions etc.. complete all as directed |
| 78 | S & F in repairs PVC (SWR) bends 75mm bore any radius for waste pipe with accessible door complete all as directed |
| 79 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing confirming to Fe 410-0 complete including dismantling of steel work complete all as specified |
| 80 | S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars, ladders, framed balusters , walk ways, railing, framework or water tank and similar work conforming to Fe- 290 Gde E-165 all as specified |
| 81 | S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottomrunners, brass handles, etc as specified erected in position and securing runners with holdfast and brackets complete including taking down old gates complete all as specified |
| 82 | S&F in repairs plastic pigeon netting on vertical surface of wall / RCC Jalli fixed with wooden beading/ screws etc all around surface complete all as specified |
| 83 | M&L for providing and fixng stainless steel (Grade 304) railing 0.85m Height made of hollow tubes, channels, plates etc incluidng stainless steel square mesh welding , grinding buffing, polishing and making curvature ( where ever required) and fitting the same with necessary stainless steel nuts and bolts complete incluidng fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete |
| 84 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed. |
| 85 | M & L for rendering 15 mm thick on fair faces of brick work or concrete, stone surfaces in CM 1:4 finished even and smooth without using extra cement |
| 86 | M & L for rendering 12 mm thick on fair faces of brick work or concrete, stone surfaces in CM 1:6 finished even and smooth without using extra cement |
| 87 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over 1.5 mm thick wall care putty (of Birla make) over a coat of alkali resistant primer including any crack filling with proper crack fill material complete all as directed by Engineer in chargeMake:- Asian or Equivalent |
| 88 | M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean including any crack filling with proper crack fill material complete all as specified and as directed by Eng-in-charge. Make:- Apex Ultima of Asian paints or Equivalent |
| 89 | M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of cement based paint as per manufacturers instructions over a coat of primer including necessary crack filling with proper crack fill material at joints/cracks complete all as specified and as directed by Eng-in-charge. Make:- Asian paints or Equivalent |
| 90 | M&L for preparation of old plastered surfaces of ceilings and applying one coat white wash on ceilings complete all as directed. |
| 91 | M&L for preparation of old plastered surfaces of walls/Ceiling and applying one coat oil bound distemper complete all as directed. |
| 92 | M&L for preparation of old decorated surface of exterior wall by removing existing treatment and washing with water and applying two coats of exterior antifungal acrylic emulsion paint as per manufacturers instructions over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint including any crack filling with proper crack fill material and as directed at site by Engineer-in-Charge.Make:- Apex Ultima of Asian paints or Equivalent |
| 93 | M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of OBD paint as per manufacturers instructions over a coat of primer over one coat of putty 1.5mm thick layer to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean including any crack filling with proper crack fill material complete all as specified and as directed by Eng-in-charge. Make:- Asian paints or Equivalent |
| 94 | Repair of stuck MS windows and ventilators by removing deposits, rust and applying greese / oil to make shutters and handles functional including welding with box hinges where required complete all as directed. |
| 95 | Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 3.0mm thick frosted glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed. |
| 96 | Repair to Aluminium doors of any description, size and thickness at any height and its including replacement of connected parts like hinges, Piote hinges and handles etc |
| 97 | S&F hydraulic door closer aluminium die cast body regulated designation No.3 universal type ,suitable for door shutters upto 100mm width and weight bears upto 80kg and fixed complete . |
| 98 | M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over 15mm thick screed bed in CM 1:4 including dismantling old work complete all as specified and directed. Please Enable Macros to View BoQ information |
| 99 | M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing laid over 15mm thick screed bed in CM 1:4 including dismantling old work complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender