Tender For Arboriculture For Married Accn Project Phase-Ii At Meerut Under Ge (Project) Meerut Cantt
Tender Value
3.87 Crore
Estimated cost
Bid Submission
21 Oct 2026
28 days left
EMD
4.62 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Arboriculture For Married Accn Project Phase-Ii At Meerut Under Ge (Project) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches n. exce.1.5m wide and n. exc. 1.5m in depth for foundation, etc or for shafts, well, cesspits, manholes, pier holes, etc. n. exc10 Sqm on plan and n. exc 1.50m deep in hard dense soil and getting out complete all as specified & directed. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exe 25 cm thick complete all as specified & directed. |
| 3 | Removing excavation materials exceeding 250m but not exceeding 500m and depositing were directed at a level 1.5 m above the starting points in soild complete all as specified & directed. |
| 4 | Supplying and stacking of good earth free from pebbles at site including royalty and carriage complete all as specified & directed. |
| 5 | Supplying and stacking at site dump manure properly matured form approved source including carriage at work site. Screened through sieve of 1.5 designation 4.75 mm complete all as specified & directed. |
| 6 | Supply of the plants of good health at site including all transportation charges including complete operation of plantation complete all as specified. |
| 7 | ASHOK MAST TREE (minimum height of 3 feet) |
| 8 | SILVER OAK (minimum height of 3 feet) |
| 9 | INDIAN AMALTAS (minimum height of 3 feet) |
| 10 | JARCHANDA (minimum height of 3 feet) |
| 11 | ROYAL PALM (minimum height of 5 feet) |
| 12 | Preparation of beds for hedging and shrubbery by excavating 30 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one parts of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. Including stacking and disposal and materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50m lift upto1.5m complete all as specified and directed. Note :- Cost of sludge, manure or extra earth to be paid for separately. |
| 13 | Supply, planting and maintaining after planning for a period of two year including replacing the shrubs trees, if any damage, following plants: (Heights 0.900 m or above) |
| 14 | Cassia biflora |
| 15 | JasminumSP |
| 16 | Hibiscus SP |
| 17 | BegnoniaVenusta |
| 18 | Boxwood |
| 19 | Welgela |
| 20 | Butterfly Bush |
| 21 | Barberry |
| 22 | Holly |
| 23 | Privet |
| 24 | Hedges |
| 25 | Spreading of sludge, dump manure or/and good earth in required thickness complete all as specified & directed. Note :- Cost of sludge, dump, manure or/ and good earth to be paid separately. |
| 26 | Mixing earth and sludge or manure in proporation complete all as specified & directed. |
| 27 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts complete all as specified & directed. Note :- Cost of manure, sludge of extra good earth if needed to be paid separately. |
| 28 | Holes 60 cm dia, and 60 cm deep |
| 29 | Holes 30 cm dia and 30 cm deep |
| 30 | Proving and fixing MS flat iron tree guard 60 cm dia and 2 m height above ground level formed of 4 nos. 25 x 6 mm and 6 nos 25 x 3 mm vertical MS flats riveted to 3 nos 25 x 6 mm MS flat iron rings in two halves, bolted together with 8 mm dia and 30 mm long bolts including painting two coasts with paint of approved brand and manufacture over a coat of priming complete all as specified & directed. |
| 31 | Maintenance. Manpower supply to maintain the arboriculture work after completion of the Phase-I Work for the entire site for 24 Months as follows :- |
| 32 | Gardener (08 Nos Person per day for 24 Months) |
| 33 | Helper/Bhisti (08 Nos Person per day for 24 Months) |
| 34 | Supplying & laying Bermuda/doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and rolling the surface with light roller make the surface smoothen & light watering the same and maintenence for 30days or more till the grass established properly complete all as specified & directed. |
| 35 | Supply & spray chemical for ATT chloropyaphos 20% EC mix with water @ 1:20 ration with spray pump before plantation complete all as specified & directed. |
| 36 | Supply and spreading uniformly DAP fertilizer complete all as specified & directed. |
| 37 | Supply and spread uria in four instalment in two years complete all as specified & directed. |
| 38 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified & directed. |
| 39 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level of specified grade excluding the cost of centering and shuttering - All work up to plinth level in PCC 1:4:8 (1 Cement : 4 coarse sand) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) complete all as specified & directed. |
| 40 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified & directed. |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture complete all as specified & directed. |
| 42 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 1.00 mm thick with zinc coating not less than 275 gm/m² complete all as specified & directed. |
| 43 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gm/m² complete all as specified & directed. |
| 44 | Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete all as specified and directed. |
| 45 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineerin- charge. Note :- (i) Item of joint fillers, sealants, dowel bars with sleeve/tie bars to be paid separately. (ii) Cement content considered in M-30 is @ 340 kg/cum. (iii) Excess/ less cement used as per design mix is payable/ recoverable separately. (iv) Cement concrete prepared with batch mixing machine complete all as specified. |
| 46 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, for all kinds of soil as directed by Engineer-in- Charge . |
| 47 | Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. complete all as specified and directed. |
| 48 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 49 | S&F CI Bench 3 seater for Park complete all as specified & directed. |
| 50 | Cutting existing GI pipe 50mm to 80 mm bore laid in position for taking out branch connection by inserting of new tee and coller including threading in exising and new pipe etc. complete all as specified and directed. |
| 51 | Supplying, laying, jointing, and fixing of GI (Galvanized Iron) pipes 80 mm dia ,conforming to IS:1239 / IS:3589, medium class with necessary GI fittings such as elbows, tees, reducers, unions, flanges, bends, clamps, hangers, etc., including threading, cutting,excavation,refilling,removal all as specified and directed. |
| 52 | Supplying, laying, jointing, and fixing of GI (Galvanized Iron) pipes 50 mm dia ,conforming to IS:1239 / IS:3589, medium class with necessary GI fittings such as elbows, tees, reducers, unions, flanges, bends, clamps, hangers, etc., including threading, cutting,excavation,refilling,removal all as specified and directed. |
| 53 | Supply and fixing GI pipe 25 mmm dia ,medium grade with and including all connected fittings laid in ground including excavation,refilling,removal complete all as specified and directed . |
| 54 | Supply and fixing gun metal ,globe or gate valve ,with cast iron wheel head ,screwed botH ends for iron pipe and fixed of size 50 mm complete all as specified and directed . |
| 55 | Supply and fixing gun metal ,globe or gate valve ,with iron wheel head ,screwed both ends for iron pipe and fixed of size 25 mm complete all as specified and directed . |
| 56 | Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:1.5:3 mix (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete in PCC 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 complete all as specified & directed. |
| 57 | Supply only steel tubular swaged poles SP 31(4 Mtr long) type complete with CI base plate and accessories complete all as specified and directed. |
| 58 | Supplying, installation, Testing & Commissioning of 30W Solar Street Light is a professional-grade lighting solution featuring a BIS-approved 100W monocrystalline solar panel and a robust 24Ah 12.8V LiFePo4 battery, designed to deliver 12 hours of reliable backup. The luminaire is constructed from durable powder-coated aluminium equipped with 34 high-efficiency OSRAM LEDs (120lm/W) and a high-transmittance PC outdoor optical lens, managed by an intelligent microcontroller-based MPPT charge controller that automatically dims the light to 50% after the first 5 hours of operation. Engineered for optimal performance at mounting heights between 4 to 5 meters with the system includes a 6-meter galvanized iron (GI) pole (76mm outer diameter, weighing approximately 13–14kg) that requires a 2-foot pit secured with 1 foot of cement concrete. The unit is IP65-rated, LM79-tested, and backed by a comprehensive warranty providing 2 years of coverage for the light and battery, alongside a 25-year warranty on the solar panel complete all as specified and directed. |
| 59 | Supply and installation of ISI marked heavy duty metal Sprinkler with accessories having 360 degree rotation 3/4 inch of minimum 20 feet range complete all as specified and directed. |
| 60 | Supply only Flexible Hose pipe Roll for gardening purpose with 1/2 inch dia complete all as specified and directed. |
| 61 | Supply and installation of Single Phase copper wound induction motor of minimum 2 HP complete with all accessories complete all as specified and directed. |
| 62 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required complete all as specified and directed. |
| 63 | Supplying and drawing wire of 2 x 6 sq. mm of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required complete all as specified and directed. |
| 64 | Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required complete all as specified and directed. |
| 65 | Supply and instal 14 AWG multi standard copper wire network for speaker connection suitable for outdoor use complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 28 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 35 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender