Supply Of Set of Inspection gauges

Sharing tender

Supply Of set of inspection gauges , inspection gauge for l in 16 turnout with 11200 mm zu-1-60 thick-web switch for 60 kg (uic) to drg. no. rdso/t- 7076 for use in depot : (rdso t - 9004). the single kit consist of 8 nos. different gauges [ warranty period: 30 months after the date of delivery ] ] , complete set of inspection gauges for use of gauges for 1:8.5 60 kg thick web switches (rt-9002 part). one set consists 1. guage-1 end t emplete at actual toe of switch.(t-9002 part), 2. guage-2 head width checking gauge at point h 22 mm head thickness., 3. guage-2a and 2b -head width checking gauge at point m 22mm head thickness., 4. guage-3 head width checking guage at point g 55 mm head tickness., 5. guage-3a and 3b-head checking guage at point g 55 mm head thickness., 6. guage 58-tongue rail height at 1098 mm from a.t.s, as per rds o drawing attached [ warranty period: 30 months after the date of delivery ] ] , complete set of inspection gauges rdso t-9003 (part) or rdso t-6155 (part-2) (alteration-4) for 10125 mm. thick-web curved switches bg for 60 kg. one set consists of 1. end template at actual toe of switch - gauge no.1/a (for rh tongue rail) 2. end template at actual toe of switch - gauge no.1/ b(for lh tongue rail). 3. head width checking gauge at 2678 mm from ats (22 mm head thickness) -gauge 2a & 2b 3. head width checking combined gauge at 2678 mm from ats (22 mm head thickness) - gauge no. 2/1. 4. head width checking gauge at 4958 mm from ats (55 mm head thickness) -gauge 3a & 3 b 5. head width checking combined gauge at 4958 mm from ats (55 mm head thickness) - gauge no. 3/1. with necessary requirements of (1) duly signe d calibration certificates of each gauge from any government approved gauge certification lab. (2) certificate issued by government agencies to lab.(3) aut ocad 01:01 drawings of each gauge in set. [ warranty period: 30 months after the date of delivery ] ] , manufacturing and supply of complete set of inspection gauges as per rdso drg, no. t-6215(part)alteration-04 , for 10125mm over riding cur ved switch b.g for 60 kg(uic) on psc sleeper to rdso drg no. t-4219 . one set consists of( i) end template-y at point r (ats)-gauge no.1 /a (for rhs tong ue rail) (ii)end template-y at point r (ats)-gauge no.1 /b (for lhs tongue rail) (iii)under cutting of tongue rail foot at ats-gauge no.2(iv) 13mm head t hickness (at 1682mm from ats)-gauge no.3(v) 12r toe radius at ats-gauge no.6(vi)tongue rail head thickness (at 4244mm from ats)- gauge no.35 .w ith necessary requirements below 1.-duly signed calibration certificates of each gauge from any government approved gauge calibration lab . 2- certificate i ssued by government agencies to lab. 3- autocad 01:01 drawings of each gauge in a set. [ warranty period: 30 months after the date of delivery ] ] , manufacturing and supply of complete set of inspection gauges as per rdso drg no. t-6213, alt-03 for for 6400 mm o.r. fan shaped switch (c urved) b.g. (1673 mm) for 60 e1 rail on psc sleepers to drawing no. t-4966. as per rdso drawing attached [ warranty period: 30 months after the date of delivery ] ]