Tender For annual repair And maintenance of In Buildings In Education Wing Division 2026-27. Sub Head: - Repair And Overhauling Of Pump Sets North Zone Under Education Wing.
Tender Value
20.28 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
1 days left
EMD
40570
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair And maintenance of In Buildings In Education Wing Division 2026-27. Sub Head: - Repair And Overhauling Of Pump Sets North Zone Under Education Wing.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and replacing volt meter 96x96 mm 0-30 Amp of 0-500 volt of AE (Automatic Electric) seimens or equivalent including cartage, labour charges for dismantling and fixing the Ampere meter and electric connection testing etc as per the directionof engineer in charge. |
| 2 | Providing and replacing AMP meter 96x96 mm 0-30 Ampere of automatic eletric seimens/Havells or equivalent including cartage labour charges for dismantling and re-fixing the AMP meter and electric connection testing etc as per the direction of engineer in charge. |
| 3 | Providing and fixing MCB (Miniature Circuit Breaker ) L&T /Fuji/ Havells make including cartage, labour charge for dismantling the old MCB & fixing the new MCB electirc connection testing etc. as per the direction of engineer in charge.a) 32 Amp (FN/TPN) L&T make |
| 4 | b) 63 AMP TPN (MCB) |
| 5 | Dismatling and installation of pump set at site after repairing the same including cartage of upto 10HP motor pump set to work shop and back at site. |
| 6 | Providing and fixing overloaded relay with 9-14 Amp to 28-42 Amp automatic starter including labour charges for fixing the over load relay cartage etc. as per the direction of Engineer-in-charge. |
| 7 | Providing and fixing 25 AMP Contractor of make L&T / BCH for DOL starter / star delta fully automatic stater including labour charges for fixing the contractor cartage etc. as per the direction of engineer-in-charge. |
| 8 | Providing and fixing 40 AMP Contractor of make L&T / BCH for DOL starter / star delta fully automatic stater including labour charges for fixing the contractor cartage etc. as per the direction of engineer-in-charge. |
| 9 | Rewinding of AC 5 HP motor mono block pump set 3 phase 440 volt 2800/2900 RPM with superior copper wire appropriate size including testing etc as per the direction of engineer-in-charge. |
| 10 | Providing and Replacing single phasing preventer Auto Switch suitable for direct online and star delta starter of make Jetson Technology/L & T or equivalent including making connection to existing starter panel etc. complete as per the direction and entire satisfaction of engineer-in-charge. |
| 11 | Repairing / overhauling Mono submersible pump set kiloskar make 1440 RPM & replacement & ball bearing 2 nos (6305,6205) part plate 1 no. gland bush 1 no. , gland plate 1 no, gland stud 2 nos, impellor key 1 no. impellor nut 1 no, impellor key way balancing gland dori with greasing, nut bolt stud, pump shaft welding turning glading cartage site to workshop & back at site including dismantling the pump set and reinstallation of pump set as per the direction of the engineer- in- charge.5.0 HP mono submersible pump set (Old winding material to be taken by contractor). |
| 12 | Providing and fixing cast iron impellor suitable for 5 HP to 10 HP motor pump set as per the direction of engineer – in – charge. |
| 13 | Providing and fixing ball bearing SKF/NBC make in existing motor pump set including greasing , cleaning and sitting in the position (main and bearing) for up to 10 HP motor pump set. |
| 14 | Providing and fixing spare parts of kit (sliver paint) for L&T /BCH make for starter i/c labour charges cartage etc. as per the direction of engineer – in – charge.a) Spare kit without coil |
| 15 | b) Overload relay (13-21 AMPERE) |
| 16 | c) No volt coil (220/415 volt) |
| 17 | Providing and fixing gun metal sleeve graphic cotton of required size in pump set including gland packing (dori) 3 HP to 5HP pump set. |
| 18 | Providing and fixing rubber gasket one set of approved quality in pump set up to 10 HP monoblock pump set suction and delivery pipe line complete as per direction of engineer – in – charge. |
| 19 | Providing and fixing electronic motor fan for up to 10 HP motor pump set as per the direction of engineer – in – charge. |
| 20 | Providing and fixing metal sheet fan guard upto 10HP motor pump set compatible with existing motor including nuts/ studs as required and as per the direction of engineer – in – charge. |
| 21 | Providing and fixing push buttons with element BCH/L&T/FUJI/VAISHNE make 22.5 mm dia including cost of push buttons fixing , cartage & testing as per the direction & entire satisfaction of Engineer-in-charge. |
| 22 | Welding turning threading and alignment of rafter shaft for upto 10 HP pump set as per the direction of engineer – in – charge. |
| 23 | Providing and fixing 6 sqmm three core water proof PVC insulated copper wire for submersible pumps/ motors etc complete as per the direction of engineer – in – charge. |
| 24 | Providing and fixing studs and nuts including making threading in body of pump 12x45 mm as per the direction of engineer – in – charge. |
| 25 | Lifting and taking out and installation after repairing up to 10 HP sewage drainage and clean water submersible drainage and clean water submersible pump tube well etc with the help of chain pully and tripot delivery pipe line and electric connection etc as per the direction of engineer – in – charge. |
| 26 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 50 mm dia nominal bore. |
| 27 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.Internal work - Exposed on walla) 40 mm dia nominal bore |
| 28 | b) 50 mm dia nominal bore |
| 29 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore Vertical |
| 30 | Providing and fixing AC 5 HP motor mono block pump set 3 phase 440 volt 2800/2900 RPM make kirloskar, Crompton greaves or equivalent with following specifications and entire satisfaction of Engineer-incharge.1. suction and delivery 50x40mm2. Frequency-50Hz 3. Head range-28-42m 4. Material – Cast Iron5. Voltage- 220 V |
| 31 | Single phase rewinding of 1 HP crompton greaves mono block pump set 2800 RPM , 220 volt , varnishing replacing of ball bearing mechanicasl seal , capacitor , gun metal impellor shaft reparing and balancing , cooling fan dismantling and refixing with cartage etc. complete. |
| 32 | Providing and fixing indicating Lamp 22mm dia BCH make including labour charge for removing and fixing the lamp i/c cartage testing etc. as per the direction & entire satisfaction of Engineer-in-charge |
| 33 | Providing and fixing L&T Lauritz Knudsen MU-G6 DOL /BCHor equivalent Three Phase Submersible Pump Controller with Single Phase Preventer and Amp Volt Meter all complete as per direction and satisfaction of Engineer-in-charge. |
| 34 | Conditions\\" following dismental item recovered from the agency as per giving blow rates :- (A) (i) 3 Phase power contactor @ Rs.50/ Each.(ii) volt metre / Ammeter / BCM/ overload realy / vall/ bearing @ 20 / Each.(iii) Single phase preventer @Rs. 50/ Each.(B) If agency not attend the complant with in 24 hours after the information of complant the amount @ 1000.00/ Each day will be recovered from the agency at the tiime of Bill Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender