Water Resources and Irrigation Government Departments Closing in 7 days TDR #57656529

Tender For Special Repair Of Damaged Type-Ii Quarters At Hydel Residential Colony, Badshahibagh In Distt. Saharanpur.

Issued by Government Departments · Saharanpur, Uttar Pradesh
Tender Value
19.97 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
7 days left
EMD
40000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair Of Damaged Type-Ii Quarters At Hydel Residential Colony, Badshahibagh In Distt. Saharanpur.

BOQ

Name of Work:- Special repair of damaged Type-II quarters at Hydel Residential colony, Badshahibagh in Distt. Saharanpur.
Sl. No. Item Description
1Attending minor type work like cleaning of roof terrace works and sun shades and other non-measurable miscellaneous works by engaging labour for full day including all T&P etc. complete. (U.P.P.T.C.L. S.O.R.-2023,Ch.- 1, Item No. - 7)
2Attending minor type of repair for full day by engaging and supplying one suitable and experienced carpenter for carrying simple type of repairing of all wood work with all T&P etc. but excluding cost of material. (U.P.P.T.C.L. S.O.R.-2023,Ch.- 1, Item No. - 8)
3Attending minor type of repair for full day by engaging and supplying one suitable and experienced plumber with kits for attending defects of water supply pipeline, cistern and fixtures with water supply defects within colony with all T&P etc. but excluding cost of material. (U.P.P.T.C.L. S.O.R.-2023,Ch.- 1, Item No. - 15)
4Excavation in foundation in ordinary soil (loam clay or sand) including lift up 1.5 M and lead upto 30 M and including filling, watering and ramming of excavated earth into the trenches or into the sides of foundation trenches as directed by the E/I for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 4.01)
5C.C. with 20 mm gauge down graded stone ballast, coarse sand (F.M. 2.9 to 3.2) and cement in proportion 4:2:1 including supply of all material, labour, T&P etc. required for proper completion of work. .(U.P.P.T.C.L. S.O.R.-2023, Item No. - 5.06)
6Precast cement concrete door sills, chaukhats, boundary posts, sheives and simllir Small work with cement, approved coarse sand(F.M. 2.9 to 3.2) and 20 mm guage down graded stone ballast in proprotion of 1:2:4 excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. binging wire including the cost of binding wire, moulds and all other materials, labours and T&P etc. required for proper completion of the work(U.P.P.T.C.L. S.O.R.-2023, Item No. - 5.09)
7RCC work with cement, approved coarse sand and 2 cm gauge graded approve hard stone ballast like granite, quarzite etc. from Dalla, Jhansi or other quarries in proportion 1:2:4 in lintels or bends and sun shade of door and windows excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 BWG GI wire & including necessary centering & shuttering etc. required for proper completion of work, including supply of all materials, labour, T&P etc. reqd. for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 5.10)
81st class brick (not less than class 150) work in 1:6 cement & coarse sand of (2.90 to 3.2 FM) mortar in foundation and plinth including the supply of all material, labour and T&P etc for proper completion of work(U.P.P.T.C.L. S.O.R.-2023, Item No. - 6.01)
91st class brick work but in 1:6 cement & coarse sand of (2.90 to 3.2 FM) mortar super structure in one brick(230mm) or more thick wall.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 6.01+6.07)
10S/F 35 mm thick fully panelled Shisham/country/locally available wood doors and windows shutter including S/F wooden cleats, stoppers & includung fixing and adjustment of hinges bolts, locks,handles, springs and/ or other fitting but exculding their supply including all labour material T&P etc. required for the proper completion of the work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 8.23)
11Supply and fixing of 32 mm thick single leaf flush doors shutter (boiled water resistence,phenol maldehide resin bonded, hot pressed factory made) commercial quality conforming to I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including cost of all materials labour & T&P required for the proper completion of work.including fixing of wooden cleats and stoppers and including cost of all materials labour & T&P required for the proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 8.54)
12S/F 35 mm thick shishum/country/locally available wood door and window jali shutters with panes of heavy quality galvanized iron wire mesh of size 14x24 with necessary beading including fixing of wooden cleats and stoppers and including cost of all materials labour & T&P required for the proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 8.41)
13M.S. work in heavy size large sections such as trusses, built-up gates, doors & windows frames , roof work, grill or railing, grating T/F rail etc. wrought to required form including supply of steel bolts,nuts,wastage etc. and their fixing charges, drilling holes, welding etc. required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.01)
14M.S.(T.M.T or TOR steel) work in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including cutting, bending etc. for proper completion of work and including supply of steel its wastage,bend, hooks and authorised overlapping as required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.03)
15S/F galvanised mosquito proof jali (16x24 gauge) with M.S. flate of 20x3mm size , on both sides screwed of welded to window or door frame. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.18)
16Supplying and fixing of welded mesh size 75x25 and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat with nut and bolts or welded as required including cost of drilling holes, bolts, nuts, washer welding etc. as required including cost of all labour, materials, T&P etc. required for proper completion of work excluding cost of angle iron and flat.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.22)
17Providing barbed iron wire fencing including fixing it to post after stretching it including cost of all labour, materials, T&P etc. required for proper completion of work excluding cost of posts. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.07)
1812 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4) minimum thickness not less than 10mm including cost of all material, labour, T&P etc. required for proper completion of the work . (U.P.P.T.C.L. S.O.R.-2023, Item No. - 11.07)
19Rough cast finish to plaster of different mortar, add extra to the plaster item. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 11.11)
2020 mm thick plaster in dado or skirting in 1:2 cement and coarse sand mortar with 3mm floating coat of neat cement or marble dust in ratio 5:1 including supply of all material, labour, T&P etc. required for proper completion of the work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 11.13)
213mm thick neat cement floating coat including cost of all material labour and T&P etc. required for proper completion of the work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 11.20)
2225 mm thick 1:2:4 plain C.C. floor laid in panels finished with 3 mm floating coat of neat cement, over base concrete. Rate includes cost of all materials, labour and T&P required for proper completion of work and excluding cost of base concrete. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 12.02)
2340 mm thick 1:2:4 plain C.C. floor laid in panels finished with 3 mm floating coat of neat cement but for without base concrete . (U.P.P.T.C.L. S.O.R.-2023, Item No. - 12.04)
24S/F 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make , laid with 1:3 cement and approved coarse sand mortar and joints finished with white cement slurry ,jointing and polishing complete including supply of all materials, labour and T&P required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 12.11)
25S/F 6 mm thick glazed floor/rugged tiles in skirting / dado laid with 1:3 cement and approved coarse sand mortar and joints finished with white cement slurry ,jointing and polishing complete including supply of all materials, labour and T&P required for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 12.12)
26P/F glass strips of 3.15 mm thickness and 25 mm deep in joints of floor at the time of laying floors flush with floor level including supply of all labour, material, T&P etc. required for proper completion of the work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 12.13)
27Painting or varnishing new iron work or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mixed paint Luxol or equivalent brand or varnish including supply of all material, labour, T&P etc required for proper completion of work. Paint to be used should conform to the ISI no. 103 (1950). .(U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.01)
28Painting or Varnishing on previously painted old wood or steel work, one coat of ready mixed priming paint and one coat of approved superior quality ready mixed paint asian/berger or equivalent brand or varnish including supply of all material, labour, T&P etc required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.03)
29One priming coat and one coat oil bound distemper on previously painted distemper surface but for every coat after first coat including supply of all material, labor and T&P etc. required for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.10)
30Finishing walls with water proof cement paint of approved quality like super snowcem or equivalent quality on new work with two coats to give an even shade including supply of all material, labour and T&P etc. required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.17)
31Finishing walls with water proof cement paint of approved quality like snowcem plus but for every coat after first coat.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.18)
32Finishing walls with two coats of water proof cement paint of approved quality like snowcem plus but for every coat on previously old treated surface.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.19)
33Dismantling cement concrete or brick or granolothic floors including base concrete and including disposal of dismantled material as directed by E/I within distance 60M (U.P.P.T.C.L. S.O.R.-2023, Item No. - 15.05)
34Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer incharge with in distance of 60 meters.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 15.12)
35Repair of plaster in patches upto one sqm. area including removal of old plaster, cleaning the same thoroughly and racking out joints to 1 cm depth watering the area and then replastering with 1:4 cement and coarse sand mortar and disposal of rubbish outside corporation area including supply of all material, labour, T&P etc. required for proper completion of the work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.02) (= 1.25 X item no. 11.07)
36Applying two coat of Dr. Fixit pdilcrete URP with cement slurry of one part of Dr. Fixit pedicrete URP (covering area of URP-2.00 to 2.25qm/Kg) and 1.5 part of cement on llorizontal and vertical damp surface Before appllcation, clean the surface with wire brush of scrubber by using suitable solvent throughly saurated should not be accumulated at any place as per direction E/I including supply of all material, labour and T&P etc. required for proper completion of work. (Ag. No.-08/EE/2025-26 Dt-27/01/2026, Item No.-96)
37Providing and replacing of oxidized iron fittings of 16 mm dia 200 mm long L-drop of approved make and as per sample approved by E/I including cost of nuts,bolts and screw etc. complete.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.17(h))
38Providing and replacing of oxidized iron fittings of Tower bolt 250 mm long of approved make and as per sample approved by E/I including cost of nuts,bolts and screw etc. complete(U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.17(b))
39Providing and replacing of oxidized iron fittings of G.I Hinges 100 mm long of approved make and as per sample approved by E/I including cost of nuts,bolts and screw etc. complete.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.17(d))
40Providing and replacing of oxidized iron fittings of Iron Door Spring of approved make and as per sample approved by E/I including cost of nuts,bolts and screw etc. complete. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.17(e))
41Providing and replacing of oxidized iron fittings of M.S. Handles 100 mmsize of approved make and as per sample approved by E/I including cost of nuts,bolts and screw etc. complete. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.17(f))
42Disposal of rubbish / debris out side the UPJVNL area as per direction of the Engineer-in-charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made).(U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.16)
43Providing and replacing of 110 mm dia PVC pipe (6 Kg/sq.cm.) with special such as Tee, bend , socket, elbow ,clamp etc. including cost of all materials, Labour T&P etc required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.17)
44P/R of 15 mm dia G.I. Union of approved make and as per sample approved by E/I for repair of pipe lines including cost of all materials, labour and T&P etc. Required for proper completion of work. n (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.10(a))
45Providing and fixing 15 mm dia ISI Approved CPVC pipes complete with special such as bend, tee, socket, clamp etc earth work including filling the trenches etc required for proper completion of the work. The rate also includes concealed GI fitting where required, cutting and making good the walls etc. and all materials, labour and T&P complete. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.19)
46P/F first quality white glazed Orissa pattern W.C. Pan Hindustan , Cera make size 580mm without P trap including cost of all material, labour and T&P etc. for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.01)
47P/F 100 mm dia white glazed \\"P\\" or \\"S\\" trap including cement concrete and all material, labour and T&P etc. for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.23)
48Hiring charges of welding machine for 8 hrs services in a day or part as per requirement for attending minoor type welding work as and where required as per direction of E/I (Ag. No.-20/EE/2023-24 Dt-27/03/2024, Item No.-84)
49Attending to petty maintenance services like plumbing services, mason services and carpenter sevices with one no. Plumber/ Mason/ Carpenter with one no. Helper per hour or part of an hour.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 22.18)
50P/F of 15 mm dia. B-class (T.T./ Swastik make) ISI marked G.I. pipe complete with G.I. Specials such as bends tee, socket cross, clamps, etc. Earthwork including filling the trenches etc. required for proper completion of work. The rate also inculdes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all labour, materials, T&P etc complete. (Internal work).(U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.01(a))
51P/F of 20 mm dia. B-class (T.T./ Swastik make) ISI marked G.I. pipe complete with G.I. Specials such as bends tee, socket cross, clamps, etc. Earthwork including filling the trenches etc. required for proper completion of work. The rate also inculdes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all labour, materials, T&P etc complete. (Internal work).(U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.01(b))
52P/F PVC connection, 450x15 with 2 brass units ISI mark heavy quality including supply of all material, labour and T&P etc. for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.09(b))
53S/F PVC ball float valve 15 mm dia with brass rod and union complete ISI marked including supply of all material, labour and T&P etc. for proper completion of work (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.06(a))
54Supply and fixing Syntex or equivalent make PVC water storage tank four layer of approved of desired capacity including all material, labour and T&P etc. required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.12)
55Providing and fixing 450mm x 300mm wash hand basin of white glazed earthen ware 1st quality ISI marked size (Hindware/Cera or equivalent make ) including supply of all required materials, labour and T&P etc. required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.10)
56Providing & fixing stainless steel sink 610mmx450mmx200mm heavy quality including supply of all required material, labour & T&P etc. required for proper completion of the work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.26)
57P/F of plain edge looking mirror 5 mm thick glass Indian polished of size 600x450 mm of Atul make or equivalent as approved by the E/I with superior quality frame and hard board sheet on back of mirror with PVC cleats and brass screws and washers for fixing purpose including supply of all material, labour T&P etc. complete. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.15)
58P/F low level 10 litre PVC Flushing cistern (Hindware or equivalent make) with all fittings including cost of all material, labour and T&P etc. for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.12)
59P/F in position 32 mm dia PVC flush pipe for low level PVC flushing cistern. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.13)
60P/F 32 mm dia PVC waste pipe of approved quality for wash basin or sink including supply of all material, labour and T&P etc. for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.14)
61Cleaning of Septic tank by removal of sludge incl. disposal of wastage material outside the colony premises, as directed by E/I by using bucket etc. & all T&P reqd. for proper completion of the work. ( UPPTCL SOR 2023, Item No..-20.12) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57656529
AUTHORITY Government Departments
TENDER VALUE 19.97 Lakhs
LAST DATE 23-10-2026
Authority
Authority Name Uttar Pradesh Jal Vidyut Nigam Limited
Work Description Tender for Special Repair Of Damaged Type-Ii Quarters At Hydel Residential Colony, Badshahibagh In Distt. Saharanpur.
Basic Detail
Tender No T-12/CCD/2026-27
Bidding Type Tender
Location
City Saharanpur
State Uttar Pradesh
Key Dates
Publish Date 23 Sep 2026
Submission Date 23 Oct 2026
Open Date 23 Oct 2026
Finance
Tender Value 19.97 Lakhs
Tender Fee 2360
EMD 40000
Exemption Available
Document List
BOQ_2239781.xls
c3db5bd5-614e-4138-928e-d2054f0f1f9d.html
Tendernotice_1 (76).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 23, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Oct 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2239781.xls

html

c3db5bd5-614e-4138-928e-d2054f0f1f9d.html

pdf

Tendernotice_1 (76).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender