Tender For Repair/Maintenance Of Lt Overhead Lines, Underground Cabling System, Lt Feeder Pillar Boxes, Earthing And Connected Works At Itarana Mil Stn Under Ge Alwar.
Tender Value
44 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
21 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Lt Overhead Lines, Underground Cabling System, Lt Feeder Pillar Boxes, Earthing And Connected Works At Itarana Mil Stn Under Ge Alwar.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, laying, jointing and testing XLPE insulated armoured heavy-duty LT underground electric cable with aluminium stranded conductor, 1100 Volt grade, 400 Sqmm, 3½ Core, laid in trenches/ducts, through pipes, under floors/roads or along poles, including dismantling and taking out existing old U/S cable, complete all as specified and directed. Make: Havells/Grandlay/Polycab/KEI/Paragon. Note: Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits, excavation and earthwork shall be measured and paid for separately. |
| 2 | All as per preceding item but 300 Sqmm, 3½ Core. |
| 3 | All as per preceding item but 240 Sqmm, 3½ Core. |
| 4 | All as per preceding item but 185 Sqmm, 3½ Core. |
| 5 | All as per preceding item but 150 Sqmm, 3½ Core. |
| 6 | All as per preceding item but 120 Sqmm, 3½ Core. |
| 7 | All as per preceding item but 95 Sqmm, 3½ Core. |
| 8 | All as per preceding item but 70 Sqmm, 3½ Core. |
| 9 | All as per preceding item but 50 Sqmm, 3½ Core. |
| 10 | All as per preceding item but 35 Sqmm, 3½ Core. |
| 11 | All as per preceding item but 25 Sqmm, 4 Core. |
| 12 | All as per preceding item but 25 Sqmm, 2 Core. |
| 13 | All as per preceding item but 16 Sqmm, 4 Core. |
| 14 | All as per preceding item but 16 Sqmm, 2 Core. |
| 15 | Excavation in trenches n exc 1.50 metre wide and n exc 1.50 metre deep for foundations of poles/struts, stays, laying of cables/pipes etc., and getting out excavated material in soft/loose soil, complete all as specified and directed. |
| 16 | M&L for dry sand and punning for cushioning to underground cable, complete all as specified and directed. Note: For purpose of payment, only punned thickness shall be measured. |
| 17 | M&L for brickwork with fly-ash bricks conforming to IS 13757:1993, old-size bricks, laid dry and flat with width equal to length of brick, abutted with each other with gap between adjacent bricks n exc 10 mm over underground cable for protection, complete all as specified and directed. |
| 18 | Returning, filling in excavated earth, including spreading, levelling, watering and well ramming in layers n exc 25 cm thick in soft/loose soil, complete all as specified and directed. |
| 19 | Removal of excavated soil/material to a distance n exc 50 metre and depositing where directed at a level n exc 1.50 metre above starting point, complete all as specified and directed. |
| 20 | Boring holes under roads, pavements and hardstandings by trenchless technology using suitable machine/ultrasound technique, including providing and laying 80 mm dia HDPE pipe suitable for 0.4 MPa working pressure, complete all as specified and directed. |
| 21 | Taking down old U/S galvanised iron tubing up to 80 mm bore, light/medium grade, laid in trenches/under roads/drains or fixed to poles/walls, complete all as specified and directed. |
| 22 | M&L for galvanised iron tubing, 50 mm bore, light grade, ISI marked, including all fittings, laid in trenches/under roads/drains or fixed to poles/walls with MS flat clamps 25 x 3 mm, bolts, nuts and washers, for protection of LT electric cable, complete all as specified and directed. Make: Jindal/Prakash/Tata. |
| 23 | All as per preceding GI tubing item but 80 mm bore. |
| 24 | S&F in repairs steel tubular swaged pole, 9 metre long, Type 410 SP-31, including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm wide up to 1.20 metre height from top of PCC coping/pedestal and two coats of aluminium paint over one coat of aluminium red oxide primer to remaining portion of pole, marking pole number and dismantling and taking down existing old U/S prestressed concrete pole 9 metre long, complete all as specified and directed. Note: Excavation, earthwork, PCC in foundation and coping shall be measured and paid for separately. |
| 25 | S&F in repairs stay assembly complete with accessories as shown on Electrical Plate No. 1 of SSR Part-I, comprising 16 mm dia x 1800 mm long stay rod, 300 x 300 x 6 mm thick stay plate, GI stay wire 7/8 SWG, bow and PCC 1:3:6 of suitable length as required, including taking out existing old U/S stay assembly complete, all as specified and directed. Note: Loop insulator, clamp, excavation and earthwork shall be measured and paid for separately. |
| 26 | S&F galvanised steel stranded stay wire, size 7/3.15 mm or 7/4 mm, for stay assembly, complete all as specified and directed. |
| 27 | Demolition of cement concrete, unreinforced, of any description and in any position as in coping/pedestal of poles, complete all as specified and directed. |
| 28 | M&L for PCC 1:4:8, Type D-2, using 40 mm graded crushed stone aggregate as in foundations of stay assemblies, poles and similar works, complete all as specified and directed. Note: Volume of pole/strut embedded in concrete shall be deducted for purpose of payment. |
| 29 | M&L for PCC 1:3:6, Type C-2, using 40 mm graded stone aggregate as in mass concrete for pole foundations, complete all as specified and directed. |
| 30 | M&L for PCC 1:2:4, Type B-2, using 20 mm graded stone aggregate as in coping concrete for poles, complete all as specified and directed. |
| 31 | S&F cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections conforming to Grade E-165 (Fe 290), including nuts, bolts, washers, welding, cold/hot bending and drilling holes for bolts in any required shape/size, including dismantling and taking down existing old U/S cross arms, bracings, supports, clamps, back plates, nuts and bolts, complete all as specified and directed. Note: Size, section and shape of steel sections shall be as directed. |
| 32 | S&F ACSR Rabbit conductor, 50 Sqmm, including jointing, 2 mm dia aluminium binding wire and stretching complete on LT poles, including dismantling and taking down existing old U/S ACSR conductor of any size from LT overhead lines, complete all as specified and directed. Note: (i) ACSR conductor shall conform to IS 398 (Part-II) and SSR Part-I. (ii) Rate shall include binding wire, aluminium tapes etc., which shall not be included in weight of conductor for payment. (iii) Weight shall be determined from horizontal distance between centres of adjacent poles and nominal weight of conductor, with 3% extra for sag, jointing, jumpers etc. (iv) Nominal weight shall be as given in relevant IS. |
| 33 | S&F in replacement LT line polypropylene composite phase separator, bolted type, for 2-wire system conforming to IS 1445, complete all as specified and directed. |
| 34 | All as per preceding phase separator item but for 3-wire system. |
| 35 | All as per preceding phase separator item but for 4-wire system. |
| 36 | Dismantling and taking down existing pin/shackle/loop type insulators of any type, complete all as specified and directed. |
| 37 | S&F loop type insulator of vitreous porcelain, white/brown/green, size 90 x 140 mm with 25.5 mm clearance hole, ISI marked, complete all as specified and directed. |
| 38 | S&F pin type vitreous porcelain insulator, white/brown/green, suitable for working pressure 1100 Volts, 100 mm high and 65 mm dia, including galvanised mild steel spindle, two GI washers and one GI nut, complete all as specified and directed. |
| 39 | S&F shackle type vitreous porcelain insulator, white/brown/green, suitable for working pressure 1100 Volts, 90 mm dia and 75 mm high, including galvanised mild steel straps 31 x 3 mm and 12 mm dia insulator bolt, washers and nuts, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 40 | S&F shackle type vitreous porcelain insulator, white/brown/green, suitable for working pressure 1100 Volts, 90 mm dia and 75 mm high, including galvanised mild steel straps 31 x 3 mm and 12 mm dia insulator bolt, washers and nuts, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender