Tender For Repair To Security Wall Alongwith Associated Items At Duxbury Lane, Aditi/Ahiliya And Vishakha Vandana Complex Under Age B/R-Ll Of Ge (Nw) Nofra.
Tender Value
49.80 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
8 days left
EMD
99600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Security Wall Alongwith Associated Items At Duxbury Lane, Aditi/Ahiliya And Vishakha Vandana Complex Under Age B/R-Ll Of Ge (Nw) Nofra.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified. |
| 2 | Demolition of brick work or stone/boulder masonary built in cement mortar and removing the rubbish outside MD land complete all as specified & directed. |
| 3 | M&L for Stone Masonary Walling of random rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete as specified & directed. |
| 5 | M&L for Providing and applying fair finish 15mm thick plaster in ratio 1:4 on fair faces of brick wall or concrete surfaces finishing even and smooth without using extra cement, on external surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge. |
| 6 | M&L for Preparation of New surfaces of walls and applying two coats of 100% acrylic exterior weatherproof emulsion paint of approved make,on New surfaces with anti-algae and anti-fungal properties, over one coat of primer, including surface preparation, scaffolding, curing, etc. complete as per manufacturer’s specification and direction of engineer in charge. |
| 7 | M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc, complete all as specified and directed. |
| 8 | Excavating over areas not exc 1.5 mtr in depth and n exc 1.5 mtr in width for foundation etc and getting out in hard/ dense soil complete all as specified and directed. |
| 9 | Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm. |
| 10 | Removing excavated material exceeding 1.50 km but n exceeding 15 km and depositing where directed |
| 11 | Demolition of Reinforced cement concrete of any description and any position complete all as specified and directed. |
| 12 | M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) in foundation filling and mass concreting complete all as specified and directed. |
| 13 | M&L for RCC (design mix) M-30 (using 20mm graded stone aggregate) as in footing, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 14 | M&L for RCC (design mix) M-30 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 15 | Use & Waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finished surfaces. |
| 16 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups cut to length bent to shape required including cranking ,bending , binding with MS wire not less than 0.9 mm dia (annealed) confirming to Fe-410 (Gde E-165) complete all as specified and directed. |
| 17 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips confirming to Fe-410 (Gde E-165) complete all as specified and directed. |
| 18 | M&L for PCC (1:2:4) type B1, (using 20mm graded stone aggregate) as in coping, kerb stone or edges of paver blocks or similar places etc complete all as specified and directed. |
| 19 | Dismantling wrought iron or mild steel work of any description, complete all as specified. |
| 20 | S&F Mild steel Framed work such as grills, gratings, fencing post etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors, (ornamental and intricate design) including drilling holes and PCC Whenever required, similar work conforming to Fe.290.Gde-E-165, complete all as specified. |
| 21 | S&F mild steel gates, fabricated from various M.S. sections, including cutting, welding, grinding, buffing, polishing and forming curves wherever required, and fixing the same with necessary mild steel nuts and bolts, complete. The gates shall be properly framed and hung with necessary hinges, stops, locking arrangements and all other required accessories, complete in all respects, conforming to Fe-290, Grade E-165, and as specified by Engineer in Charge. |
| 22 | M&L for Preparation of new steel surfaces & apply two coats of synthetic enamel paint over a coat of red oxide, complete all as specified. |
| 23 | M&L for preparation of old steel surfaes of any description and applying one coats of synthetic enamel paint , complete all as specified. |
| 24 | Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified. |
| 25 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in Wall linnings, pillars, working table, wall clading and like over and including 12 mm thick CM or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding and rounding all as directed. |
| 26 | S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc inculding dismantling of existing barbed wire as directed (each line wire to be measured). |
| 27 | S&F in repairs barbed razor type concertina coil, 9SWG hot galvanized spring tensile wire of UTS 145 to 150 N/Sqm, zinc coating 250 to300 gms/sqm, dia of coil when un-streched shall be 610 mm having minimum of coil (GI strip) 1.625 Kg/Rm, hot dip galvanised razar ribben tape of size 0.50 mm thickness,19mm wide before wraping on central core wire fixed ith 1.66 mm thick GI clips (minimum 25 Nos/RM) and special nut and bolts to hold two coils together and extra rows parallel wire of gauge including dismatling of existing concertina coil complete all as specified and as directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land. |
| 29 | M&L for Glazed ceramic exterior elevation tiles coloured of size 300x600mm, 8-10mm thick laid on vertical surface such as dado/skirting/ wall cladding over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick backing coat in CM 1:4, disposing debries off the premises as per BMC guidelines complete all as specified and directed. |
| 30 | M&L for coloured glazed ceramic tiles 300x450x7mm thick as on vertical surfaces such as skirting/dado including 10mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or colour including cement mortar bedding / backing and disposing the rubbish to the out side of MD land. |
| 31 | M&L for Preparation of old decorated surfaces of walls and applying two coats of 100% acrylic exterior weatherproof emulsion paint of approved make,on Old surfaces with anti-algae and anti-fungal properties, over one coat of primer, including surface preparation, scaffolding, curing, etc. complete as per manufacturer’s specification and direction of engineer in charge. |
| 32 | S&F as in repairs steel rolling shutters of 1.25mm thickness of laths, including ball bearing as specified including top cover, anchoring rod, hasp and staple, erected in position as indicated, complete but gear operated type with bevel gear box and crank handle including painting of rolling shutter with two coats of synthetic enamle paint over one coat of red oxide complete all as specified. |
| 33 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 34 | Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender