Tender For Execution Of Work Under Mw (Upha) To Grill Fencing On Northern Side (Remaining) Inside The Citadel Walls (Fort), Ch Aner- Pavagadh.
Tender Value
92.72 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
17 days left
EMD
2.31 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panch Mahals → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Work Under Mw (Upha) To Grill Fencing On Northern Side (Remaining) Inside The Citadel Walls (Fort), Ch Aner- Pavagadh.
BOQ
| Sl. No. | Item Description |
| 1 | Execution of work under following items |
| 2 | Towards earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 3 | Towards the filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 4 | Towards supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 5 | Towards providing and laying in position cement concrete (pcc) of specified grade excluding the cost of cantering and shuttering - All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 6 | Towards centring and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 7 | Towards providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 8 | Towards the steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 9 | Towards the brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse sand) (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 10 | Towards hiring charges of hydraulic machine per hour bases including the fuel charges for the removal of bamboos, debris and other unnecessary vegetation before the execution of works including all charges etc complete as directed by engineer-in-charge. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 11 | Towards finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.: On steel work (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 12 | Towards the stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a group of average 12 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: 50 mm thick (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 13 | Towards steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 14 | Towards disposal of building rubbish / melba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 15 | Towards stone work in plain ashlar in super structure up to floor five level in cement mortar 1:6 (1 cement: 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: One face dressed (Including all the materials & labour charges etc. complete as direction by site in charge) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender