Tender For Notice Inviting Tender For The Contract Of Replacment Of Existing Damaged Sheets With New Non-Asbestos Sheets Of Lift Shaft With Making An Arrangement (Outside And Inside) From Ground Level To Top As Required For Working At Height In Tae A
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
19 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Notice Inviting Tender For The Contract Of Replacment Of Existing Damaged Sheets With New Non-Asbestos Sheets Of Lift Shaft With Making An Arrangement (Outside And Inside) From Ground Level To Top As Required For Working At Height In Tae At Rcf Thal
BOQ
| Sl. No. | Item Description |
| 1 | MAKING AN ARRANGEMENT FROM GROUND LEVEL TO TOP OF LIFT SHAFT TOWER FROM OUTSIDE AND INSIDE AS REQUIRED WITH NECESSARY SCAFFOLDING / MAST CLIMBER WITH / WITHOUT SUSPENDED PLATFORM SYSTEM FOR WORKING AT HEIGHT FOR REPLACEMENT OF EXISTING SHEETS WITH NEW NON-ASBESTOS SHEETS.THE MAST CLIMBER WITH/WITHOUT SUSPENDED PLATFORM SYSTEM SHALL BE INCLUDING ALL REQUIRED EQUIPMENTS & ACCESSORIES OF APPROPRIATE CAPACITY AND CAPABLE TO DO INTENED JOBS MENTIONED IN THE SCOPE OF THE WORK INCLUDING REQUIRED TOOLS TACKLES,MATERIALS AND MANPOWER /EXPERTS ETC.COMPLETE.THE ARRANGEMENT SHALL BE COMPLIANCE TO THE SAFETY NORMS/PROCEDURE REQUIRED FOR THE JOB. THE ARRANGEMENT SHALL BE KEPT TILL SATISFACTORY COMPLETION OF THE ENTIRE JOB. REMOVING THE WHOLE ARRANGEMENT AFTER COMPLETION OF THE WORK AS DIRECTED BY EIC. INCLUDING MAKING ARRANGEMENTS OF SCAFFOLDING USING MS PIPES AND COUPLERS AND OR H -FRAME, BRACINGS OR COMBINATION OF THESE TO ARRIVE A SUITABLE GRID OF SCAFFOLDING FOR ACCESSING REPLACEMENT OF SHEETS AS PER REQUIREMENT. REMOVING OF OLD SHEETS & FIXING OF NEW SHEETS SHALL BE PAID SEPERATELY. |
| 2 | PROVIDING AND FABRICATING STRUCTURAL STEEL WORK IN ROLLED SECTIONS LIKE FLATS, JOISTS, CHANNELS, ANGLES, TEES ETC. AS PER DETAILED DESIGN AND DRAWINGS OR AS DIRECTED INCLUDING CUTTING, FABRICATING, HOISTING, ERECTING, FIXING IN POSITION MAKING RIVETED/BOLTED/WELDED CONNECTIONS WITHOUT CONNECTING PLATES, BRACES ETC. AND INCLUDING ONE COAT OF ANTICORROSIVE PAINT AND OVER IT TWO COATS OF OIL PAINTING OF APPROVED QUALITY AND SHADE ETC. COMPLETE. |
| 3 | PROVIDING & FIXING IN POSITION GALVANIZED IRON STRIPS FOR FIXING SHEETS ON ITS LOCATION IN LIFT TOWER OF APPROVED SIZE BY EIC TO MATCH WITH EXISTING STRUCTURAL FRAME & SHEETS. FOR FIXING IN POSITION AS DIRECTED INCLUDING NECESSARY STIFFENERS, SUPPORTING ARRANGEMENT, CUTTING, FABRICATING/ BENDING TO REQUIRED SHAPE, MAKING & FIXING IN POSITION WITH NECESSARY SCREWS, CLAMPS, BOLTS AND OTHER FASTENERS AND NECESSARY WELDING IF REQUIRED. ALL JOINTS TO BE THOROUGHLY FIX IN REQUIRED SIZE AND PATTERN WITH ALL FITTINGS COMPLETE. |
| 4 | ERECTING, HOISTING AND FIXING IN POSITION STRUCTURAL STEEL WORK IN SINGLE OR BUILT-UP SECTIONS AT ALL HEIGHTS AND LEVELS (DISMANTLED, PRE-FABRICATED STEEL STRUCTURE) WITH REQUIRED APPROVED NUT BOLTS ETC. IF WELDING IS REQUIRED SAME SHALL BE GOT APPROVED BEFORE FIXING STRUCTURAL MEMBER IN POSITION. M.S. PIPE SCAFFOLDING AND APPLYING INCLUDING ONE COAT OF ANTICORROSIVE PAINT AND OVER IT TWO COATS OF OIL PAINTING OF APPROVED QUALITY AND SHADE ETC. COMPLETE AFTER FABRICATION INCLUDING TOUCHING UP AFTER ERECTION ETC. COMPLETE AS DIRECTED BY ENGINEER.(STRUCTURAL STEEL MATERIAL AND PAINT WILL BE SUPPLIED BY RCF, PARTY TO SHIFT MATERIAL FROM STORES TO SITE. ALL CONSUMABLE GASES AND OTHER MATERIAL ARE IN SCOPE OF CONTRACTOR) |
| 5 | SUPPLYING & FIXING OF 0.5 MM THICK META COLOUR CORRUGATED SHEETS I.E. 0.45MM BASE METAL THICKNESS AND 0.50MM TOTAL COAT THICKNESS OF MINIMUM YIELD STRENGTH OF 550 MPA FOR ROOFING AND CLADDING AND AS PER THE BELOW MENTIONED TECHNICAL SPECIFICATIONS INCLUDING CORNER PIECE, RIDGE, GUTTERS ETC. PPGL- PRE PAINTED GALVALUME STEEL SHEET ZINC COATING : AZ 150 PAINT COATING : SUPER DURABLE POLYESTER(SDP) PAINTING / SILICON MODIFIED POLYESTER (SMP) PAINTING AS DIRECTED BY EICPAINTING THICKNESS (TOP) : 25 MICRON PAINTING THICKNESS (BOTTOM) : 5-7 MICRON |
| 6 | PROVIDING & FIXING OF 6 MM THICK TOP SIDE COLOUR COATED NON-ASBESTOS CEMENT CORRUGATED SHEETS (ROOF SHEETS, VERTICLE SHEETS) WITH REMOVING OLD SHEETS & CONFORMING TO IS:14871 OF VARYING LENGTHS INCLUDING 8MM DIA. STAINLESS STEEL (SS 304) J OR L HOOK BOLTS WITH 50MM MINIMUM THREADED LENGTH, SS WASHERS, SS NUTS, CORNER PIECES, RIDGES, GUTTERS, CUTTING SHEETS TO SIZE AND SHAPE WHEREVER REQUIRED, NECESSARY. (INCLUDING REMOVAL OF EXISTING OLD SHEETS AND STACKING AS REQUIRED AS DIRECTED BY EIC) (LAPS SHALL NOT BE PAID EXTRA, SHEET COLOUR TO BE APPROVED BEFORE USE) (CORNER PIECES, RIDGES SHALL BE PAID SEPERATELY) |
| 7 | FIXING OF NEW/OLD RCF ISSUED SHEETS AFTER REMOVING OLD ASBESTOS / FIBER / METAL SHEETS AS PER EXISTING PATTERN BY NEW SS- L & J- SHAPE HOOKS (S.S. HOOKS SHALL BE PAID SEPARATELY IN ITEM NO. 8 BELOW) WITH CAREFULLY SHIFTING/SLIDING OF OLD SHEETS. STACKING OF OLD USABLE MATERIALS & DISPOSAL OF DEBRIS WITHIN TAE PLANT PREMISES AS DIRECTED BY EIC. REMOVING OF OLD SHEETS SHALL BE PAID SEPERATELY. |
| 8 | SUPPLYING L & J- SHAPE SS HOOK FOR IS SECTION; MOC= SS 304; DIA.= 8 MM; MINIMUM THREADED LENGTH 50MM INCLUDING EPDM ROUND WASHER / SS ROUND WASHER / SS NUT & PVC CAP ETC. AS DIRECTED BY EIC. |
| 9 | PROVIDING AND FIXING 1.5 MM THICK POLYCARBONATE WHITE DIFFUSER TYPE CORRUGATED ROOF SHEETS PANEL OF APPROVED MAKE WITH REMOVING OLD SHEETS, INCLUDING 8MM DIA. STAINLESS STEEL (SS 304) J OR L HOOK BOLTS WITH 50MM MINIMUM THREADED LENGTH, SS WASHERS, SS NUTS, CUTTING SHEETS TO SIZE AND SHAPE WHEREVER REQUIRED, NECESSARY (INCLUDING REMOVAL OF EXISTING OLD SHEETS AND STACKING AS REQUIRED AS DIRECTED BY EIC) (LAPS SHALL NOT BE PAID EXTRA) . |
| 10 | REMOVING OLD/EXISTING SHEETS (ASBESTOS / FIBER / METAL SHEETS) WITH CAREFULLY SHIFTING/SLIDING OF OLD SHEETS. STACKING OF OLD USABLE MATERIALS & DISPOSAL OF DEBRIS WITHIN FACTORY PREMISES AS DIRECTED BY EIC. (INCLUDING SCAFFOLDING, WHICH SHALL NOT PAID EXTRA) |
| 11 | PROVIDING AND FIXING ONLY MISC. MATERIALS NOT COVERED IN THE SCHEDULE OF RATES MENTIONED ABOVE INCLUDING, FIXING AS DIRECTED BY EIC, STORAGE, TRANSPORTING, LOADING, UNLOADING AT SITE ETC. COMPLETE AS DIRECTED EIC AS PER REQUITREMENT OF JOB .(PAYMENT SHALL BE MADE ON BASIS OF ACTUAL COST OF MATERIAL PER GST-CASH MEMO/ RECEIPT-GST). 10% EXTRA PAYABLE TO THE CONTRACTOR TO COVER PROFIT AND OVERHEAD. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender