Tender For Repair Of Roads In Various Parts Of The City, Including The Repair And Patching Of Asphalt Roads.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Sep 2026
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Satara → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair Of Roads In Various Parts Of The City, Including The Repair And Patching Of Asphalt Roads.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (Item used only when Quantity is below 10 Cu.m) MORTH 301 SSR OF 2022-23 ITEM NO. 2.1 & PAGE NO.26 |
| 2 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. MORTH 305 SSR OF 2022-23 ITEM NO. 2.25 & PAGE NO.27 |
| 3 | Brooming the W.B.M. surface by wire Brushes, coir brushers, dusting, cleaning etc. for receiving the bituminous treatment complete. Brooming the water Bound Macadam surface by wire. MORTH 404 SSR OF 2022-23 ITEM NO. 3.14 & PAGE NO.32 |
| 4 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate) MORTH 404 SSR OF 2022-23 ITEM NO. 3.18 & PAGE NO.32 |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate) MORTH 404 SSR OF 2022-23 ITEM NO. 3.2 & PAGE NO.33 |
| 6 | Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with concical crusher plant heating and spraying the bitumen of specied grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. including applying tack coat of VG 10 grade bitumen at the rate of 0.30 Kg Sqm. on existing bitumen surface. (VG-30 bulk rates are considered to arrive at rates) IRC SP-20 2002, Clause No. 8.7.3, Appendix 8.4 SSR OF 2022-23 ITEM NO. 3.36(b) & PAGE NO.36 |
| 7 | Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with concical crusher plant heating and spraying the bitumen of specied grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk rates are considered to arrive at rates) IRC SP-20 2002, Clause No. 8.7.3, Appendix 8.4 SSR OF 2022-23 ITEM NO. 3.35(b) & PAGE NO.35 |
| 8 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.50kg/10 sqm.VG-30 bulk bitumen MORTH 503 SSR OF 2022-23 ITEM NO. 3.3 & PAGE NO.34 |
| 9 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) MORTH 510 SSR OF 2022-23 ITEM NO. 4.12 & PAGE NO.43 |
| 10 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials & bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. MORTH 513 SSR OF 2022-23 ITEM NO. 4.01 & PAGE NO.41 |
| 11 | Picking the road surface including sectioning etc. complete (BT surface.) MORTH 501 SSR OF 2022-23 ITEM NO. 2.33 & PAGE NO.28 |
| 12 | BITUMINOUS MACADAM: Proving and laying bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 80/100 mm compacted thickness with 3.3 % specified grade of Bitumen. -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, vibratory roller. (VG-30 bulk bitumen rates are considered to arrive at rates) MORTH 504 SSR OF 2022-23 ITEM NO. 3.4 & PAGE NO.38 |
| 13 | BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) MORTH 509 SSR OF 2022-23 ITEM NO. 3.48 & PAGE NO.40 |
| 14 | DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates) MORTH 507 SSR OF 2022-23 ITEM NO. 3.44 & PAGE NO.39 |
| 15 | Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. MORTH 301 SSR OF 2022-23 ITEM NO. 2.13 & PAGE NO.26 |
| 16 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 21.4 & PAGE NO.194 |
| 17 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade) Bd. E. 1 Page No. 287 SSR OF 2022-23 ITEM NO. 24.01 & PAGE NO.215 |
| 18 | Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) etc. complete MORTH 602 SSR OF 2022-23 ITEM NO. 5.22(a) & PAGE NO.52 |
| 19 | Labour for filling pot holes with premix asphalt chips, cleaning the road surface with wire brushes & gunny bags, applying tack coat, spreading mixture hand ramming or light compaction with power roller conveying material to the site of work (excluding cost and of material fuel & heating asphalt) etc complete. As directed by Engineer- in-charge SSR OF 2022-23 ITEM NO. 8.01 & PAGE NO.90 |
| 20 | Repair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method filled with 75mm B.M, applying bitumen tack coat at the bottom and vertical sides as per as per MORTH specification clause 3004.1 & 3004.2 MORTH 3004.2 SSR OF 2022-23 ITEM NO. 8.06 & PAGE NO.90 |
| 21 | Patch repair on already filled pot holes with 20 mm premix carpet and seal coat as per MORTH specification clause 3004.1 & 3004.2 As directed by Engineer- in-charge SSR OF 2022-23 ITEM NO. 8.07 & PAGE NO.90 |
| 22 | Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat as per MORTH specification clause 3004.1 & 3004.2 MORTH 3004.2 SSR OF 2022-23 ITEM NO. 8.08 & PAGE NO.90 |
| 23 | Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings etc. complete As Directed by Engineer In Charge SSR OF 2022-23 ITEM NO. 8.14 & PAGE NO.91 |
| 24 | Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location etc. complete As Directed by Engineer In Charge SSR OF 2022-23 ITEM NO. 8.16 & PAGE NO.91 |
| 25 | Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete As Directed by Engineer In Charge SSR OF 2022-23 ITEM NO. 8.17 & PAGE NO.91 |
| 26 | Dressing of side shoulder / Scrapping the road side shoulder by Mechanical means ( By JCB /DOUZER) including excavation of raised side shoulders upto 15cm depth including remooving /cutting bushes,grass and dressing shoulder to desired camber and disposing of excavated stuff up to road boundary etc complete. as directed by Engineer In Charge. As Directed by Engineer In Charge SSR OF 2022-23 ITEM NO. 8.23 & PAGE NO.92 |
| 27 | Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of VG-30 grade @ 2 kg / sqm , spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of VG 10 grade bitumen at the rate of 0.30 Kg Sqm. on existing bitumen surface. ( For Repair works only) As directed by Engineer in charge SSR OF 2022-23 ITEM NO. 8.34 & PAGE NO.97 |
| 28 | Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of VG-30 @ 1.75 kg / sqm, spreading 12mm.size chips compacting with Static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat at the rate of 0.30 Kg Sqm.( for repair works only) As directed by Engineer in charge SSR OF 2022-23 ITEM NO. 8.35 & PAGE NO.97 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender