Tender For Vellore District Construction Of New Anganwadi Building At Melmankuppam In Melmoil Panchayat Mlacds 2026-27 K.V.Kuppam Block Package No 01
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
11 days left
EMD
16450
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vellore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Vellore District Construction Of New Anganwadi Building At Melmankuppam In Melmoil Panchayat Mlacds 2026-27 K.V.Kuppam Block Package No 01
BOQ
| Sl. No. | Item Description |
| 1 | Vellore District Construction of New Anganwadi Building at Melmankuppam in Melmoil Panchayat MLACDS 2026-27 k.v.Kuppam Block Package No 01 |
| 2 | Anganwadi Building |
| 3 | Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation. |
| 4 | Supplying and filling of M sand basement filling including cost and conveyance of all materials to site including all labour charges for filling etc.complete complying to standard specification |
| 5 | Supplying and filling of conveyed earth with a lead of 1Km for basement filling including cost and conveyance of all materials to site including all labour charges for filling etc.complete complying to standard specification |
| 6 | Cement Concrete 1:4:8 mix using 40 mm HBG metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. Compacting etc., complete complying with standard specifications and as directed. |
| 7 | Brick work in CM 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 Cm for the following including curing etc., complete complying with standard specifications. |
| 8 | Below Basement |
| 9 | Above Basement |
| 10 | Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification. |
| 11 | Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. Rate for 10m2 for the following items (RCC floor slab, roff slab, Rectangular / Square, Tee/ Ell beams, Lintels, |
| 12 | Below GL |
| 13 | Above GL |
| 14 | Rainforcement Cement Concrete 1:1.5:3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the RCC floor or roof |
| 15 | Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratioof 32:12.5 including cost and conveyance of all materials to site and all labourcharges for mixing , laying ,and finishing etc complete |
| 16 | Terrace flooring with one course of pressed tiles size of 20 x 20 x 2cm using CM1:3 mixed with crude oil 10% by weight of cement and pointed with cement mortor 1:3 over one coarse of Brick jelly lime concrete of 75mm average thick etc., complete |
| 17 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete |
| 18 | Plastering with CM 1:5, 12mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 19 | Floor finishing with Ceramic tiles of size 305 x 305 x 6mm colour tiles with design laid in cement mortar 1:3 using 20 mm thick and pointing with same colour including cost and conveyance of all materials to site and all labour charges etc., |
| 20 | Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M.Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification |
| 21 | Dadooing the sides of the wall up to the required height and approved quality colour printed Glazed tiles of size 305 x 200 x 3 mmand set in CM 1 : 2,10mm thick and pointing with same colour cement of 4kg including cost and conveyance of all materials., |
| 22 | Distempering two coat using oil bound Distemper including cost of distemper and labour charges, etc, complete. |
| 23 | Painting Two coat approved Emulsion paint over the plastered surface including cost and all other charges etc., |
| 24 | Painting Two coat of new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying |
| 25 | Supply of steel doors and windows |
| 26 | Door 1 0.90 m X 2.10 m |
| 27 | Door 2 1.20 m X 1.80 m |
| 28 | Door 3 0.75 m X 1.80 m |
| 29 | Window 1.20 m x 1.30 m |
| 30 | Ventilator 0.60 m x 0.45 m |
| 31 | Supply and fixing water closet with P- trap |
| 32 | Baby friendly toilet |
| 33 | Provision for Labour charges for fixing Door and Windows etc, |
| 34 | Supply and fixing for 500 ltr Hdpe tank |
| 35 | Provision for Painting Cartoon |
| 36 | Provision for Leachpit |
| 37 | Provision for Electrical arrangements |
| 38 | SD 20 |
| 39 | SD 106 |
| 40 | SD 88 |
| 41 | SD 36 |
| 42 | SD 126 |
| 43 | SD 64 |
| 44 | SD 69 |
| 45 | CFL Blup |
| 46 | 100LPM X20m Motor |
| 47 | Towards Name Board Charges |
| 48 | GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender