Tender For special Repair To Certain Perimeter Security Fence With Concertina Coil And Bdy Wall At Tech Area Of 301 Army Avn Sqn (Spl Ops) At Mil Stn Haldwani Under Ge Ranikhet
Tender Value
37.57 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
18 days left
EMD
75150
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Certain Perimeter Security Fence With Concertina Coil And Bdy Wall At Tech Area Of 301 Army Avn Sqn (Spl Ops) At Mil Stn Haldwani Under Ge Ranikhet
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar all as specified. |
| 2 | M&L Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete. |
| 4 | M&L for rendering 15 mm thick readymade plaster on inner/outer walls by adding 17-19% of potable water by weight of material for thickness above 15mm it is recommended to be applied in multiple layers, ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the compressive strength @ 28 days 10-12 Mpa/Bulk density 1500- 1600 Kg/m3. (Note: The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20 Mtr ht all as specified and directed |
| 5 | M&L for 2mm thick external wall care putty on new plastered surfaces of wall, and apply two coat of exterior emulsion paint (Apex) over a coat of primer complete all as specified and directed |
| 6 | M&L for preparation, cleaning scraping of old treated surfaces of wall and apply 2mm thick external wall care putty and apply two coat of Exterior emulsion paint (Apex) over a coat of primer complete |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 8 | S & F round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips. |
| 9 | Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed |
| 10 | Fixing in repair only chain link MS galvanised fencing any size or type including line wires,any mesh,size and type of standards,rails,straining bolts,etc,including provision of binding wire complete all as specified and directed. |
| 11 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 12 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 13 | S&F galvanised high tensile punched tape concertina coil of 600mm dia with 50 turns per coil and minimum 8kg weight and tensile strength of 1600N/mm2, straining and fixing to any type of standard rails,straining bolts,including securing or tying at crossing with and provision of galvanised mild steel wire,straining bolts/clips at ends,staples or steel pins etc. complete all as specified and directed. |
| 14 | Preparing new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge |
| 15 | S&F Framed work such as gate, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 16 | M&L for providing PCC 1:2:4 type B-0 as in coping, roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed. |
| 17 | M&L PCC 1:3:6 type C-2 (using 40mm graded stone agg) as in foundation, filling and mass concrete. |
| 18 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone agg) as in foundation, filling and mass concrete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender