Tender For Repair/Replacement Of Ht Ug Cable, Fault Finding Works And Ht Joints To Ht 11Kv Vcbs And Other Maintenance Work At Various Sub Stations Under Ge (Maint) Arakkonam
Tender Value
24 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
11 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranipet → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Ht Ug Cable, Fault Finding Works And Ht Joints To Ht 11Kv Vcbs And Other Maintenance Work At Various Sub Stations Under Ge (Maint) Arakkonam
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for testing and identifying exact location and nature of defect in 11 KV HT UG cable of any size/type using cable fault locator/equipment, finding of cable route as per site requirement including transportation, testing after rectification and restoring supply in all respects and commissioning complete all as specified and as directed Note : Earth work excavation, cable joints as per site requirement shall be measured and paid separately under relevant items of the schedule. |
| 2 | Material and Labour for meggering existing HT UG cable of any size to find out fault for rectification from any location directed by Engr-in-charge, after disconnection of cable from both ends and terminating the ends after rectification of cable complete all as specified and as directed.Note :Cable jointing kit ,earthwork and excavation and relaying will be measured and paid separately under relavant items |
| 3 | Taking up old /existing unserviceable defective HT 11000V UG Cable of size 185 sqmm 3 core from the existing trenches/ near panels and keep a side carefully and segregating serviceable portion of cable for reuse including cutting vegetation in the cable route before taking down complete all as specified and as directed Note: (i) Excavation/ earth work shall be measured and paid separately under relevant items.(ii) Retrieved serviceable cable cover from site be properly stacked and reused as protection to HT UG cable and shall be measured and paid separately under relevant items.(iii) Serviceable portion of cable shall be relaid as directed and shall be measured and paid separately under relevant items. |
| 4 | All as per item no 3 but for cable size 95 sqmm 3 core |
| 5 | Supply, laying, testing for replacement against unserviceable part of item No 3 here-in- before, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts grade, cross sectional area 185 sqmm 3 core complete all as specified and directed. |
| 6 | Supply, laying, testing for replacement against unserviceable part of item No 4 here-in-before, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts, grade cross sectional area 95 sqmm 3 core complete all as specified and directed . |
| 7 | Relaying in trenches serviceable electric power cables (heavy duty) with aluminium conductor, 11000 volts, grade cross sectional area 185 sqmm 3 core retrieved from ground complete all as specified and directed. |
| 8 | All as per item no 7 but for 95 sqmm 3 core |
| 9 | Material and labour for HT Cable jointing kit for cable, outdoor termination heat shrink type end joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 sqmm complete all as specified and directed. |
| 10 | Material and labour for HT Cable jointing kit for cable, outdoor termination heat shrink type end joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 sqmm complete all as specified and directed. |
| 11 | Material and labour for HT Cable jointing kit for cable, straight through termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 sqmm complete all as specified and directed. |
| 12 | Material and labour for HT Cable jointing kit for cable, straight through termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 sqmm complete all as specified and directed. |
| 13 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth for taking out /for laying under ground cables/pipes etc and getting out in soft/loose soil complete all as specified and directed |
| 14 | Spreading riddled earth as obtained from excavation in cable trenches complete all as specified and directed. |
| 15 | Supply and laying unreinforced pre cast concrete cable cover class HV type 1 flat size 300 x 180 x 40 mm for cable protection complete all as specified and as directed |
| 16 | Relaying in trenches serviceable un-reinforced precast concrete cable cover, retrieved from item no.3 complete all as specified and as directed |
| 17 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed |
| 18 | Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed |
| 19 | Material and labour for cast iron cable route indicator of standard size circular/elliptical shaped incl 25 x 6 mm angle iron stud with slanting top duly embossed ' HT CABLE ' including and planted on PCC foundation 1:3:6 type C2(40mm aggregate) 300x300x100mm including taking out old damaged indicators and demolition of PCC near old indicators, necessary earth work, site clearance, painting and preparation of surface complete all as directed. |
| 20 | Material and labour for cutting of road, hard standing made of concrete or premix carpet, WBM, soling and moorum filling including excavation for laying of cable pipe and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed. |
| 21 | Material and labour for Galvanised iron tubing 100 mm dia light grade laid in trenches/floors/walls for earth lead protection and cables at road crossing etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 22 | Material and labour for Galvanised iron tubing 100 mm dia light grade laid in trenches/floors/walls for earth lead protection and cables at road crossing etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender