Tender For Comprehensive Maintenance Work For Project Office, Dispensary, Base Workshop, Glass House Area, Andrewyul Substation, Dragline Section, Magzine House, Coal Testing Lab And Dg Shed For A Period Of 2 Years.
Tender Value
3.98 Crore
Estimated cost
Bid Submission
08 Oct 2026
10 days left
EMD
4.98 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Work For Project Office, Dispensary, Base Workshop, Glass House Area, Andrewyul Substation, Dragline Section, Magzine House, Coal Testing Lab And Dg Shed For A Period Of 2 Years.
BOQ
| Sl. No. | Item Description |
| 1 | (A) GENERAL MANPOWER SERVICES FOR MISC. JOBS |
| 2 | Deployment of Facility Manager for heading the entire team and single point of contact & overall incharge of FM on site operators and reporting to Engineer-in-charge or his representative. (Note: Minimum one Facility Manager is to be deployed on monthly basis only) |
| 3 | Deployment of Mason in General Shift for day to day maintenence work and as and when required as per instruction of EIC. |
| 4 | Deployment of Carpenter in General Shift for day to day maintenence work and as and when required as per instruction of EIC. |
| 5 | Deployment of Plumber in different shifts for day to day maintenence work and as and when required as per instruction of EIC. |
| 6 | Deployment of unskilled manpower in different shifts for misc. jobs for day to day maintenence work and as and when required as per instruction of EIC. |
| 7 | Deployment of skilled manpower in General shifts for misc. jobs for day to day maintenence work of ETP as per instruction of EIC. |
| 8 | Deployment of Sweeper for misc. jobs in General Shift for day to day maintenence work and as and when required as per instruction of EIC. |
| 9 | (B) UPKEEPING WORKS |
| 10 | Cleaning of drain including removal of muck / sludge and other refuses and disposal of same through trolley or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 2.00 KM with all tools & tackles as per direction of EIC. Upto 300 mm width. |
| 11 | Cleaning of drain including removal of muck / sludge and other refuses and disposal of same through trolley or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 2.00 KM with all tools & tackles as per direction of EIC. Above 300 mm width & upto 600 mm width. |
| 12 | Cleaning of drain including removal of muck / sludge and other refuses and disposal of same through trolley or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 2.00 KM with all tools & tackles as per direction of EIC. Above 600 mm width. |
| 13 | Cleaning of all types of roofs including removal of dry leaves, weedings & cleaning of drain holes, brooming etc. all complete with all tools & tackles & staking the garbage at specified place as per direction of In-charge. |
| 14 | Brooming & cleaning of all roads within the premises of service buildings & other places as required with all tools & tackles & stacking the garbage at a specified place as per instruction of EIC. |
| 15 | Cleaning of toilets in service Buildings, Community centre, Club and other buildings etc. including cleaning of floors, dado, skirting, WC pan (Indian type / European type), wash basin, shelves, mirror & other fittings, if any by hand dusting & cleaning with soap solution, acids, deodrants, phynile etc. to make the toilet clean & hygenic & providing napthaline balls in urinals, wash basins etc. with all tools, tackles & consumables as per instruction of EIC. |
| 16 | Cleaning, mopping & washing of floor including clearing of cobwebs of public buildings, other places neatly with detergents / bleaching powder etc. all complete with tools, tackles & consumables to make the floor clean & hygenic as per instruction of EIC.,WORKSHOP & OFFICE BUILDING |
| 17 | Cleaning and desilting of septic tank including removal and refixing of cover slab, removal and disposal of the sludge with all lead as per instruction of EIC including hire charge & running cost of machinaries, labour etc all complete. |
| 18 | Supply & stacking at site: Moorum |
| 19 | Fooging with smoker mixed with diesel @ 8 ml smoker with one litre of diesel twice per month as per direction of Engineer-in-charge (treatment to be done using spray machine along with proper safety provisions for sprayer like mask etc). |
| 20 | General pest control with Malathion 50% EC and Nuvan 75% EC (2 ml Malathion & 6 ml Nuvan to be mixed with 1 litre water) for inddor as well as outdoor treatment once in a month as per direction of Engineer-in-charge. (Treatment to be done using spray machine along with proper safety provisions like mask etc.) |
| 21 | Disposal of dead animal icluding transportation to specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime & bleaching powder etc. & refilling the pit with earth all complete with tools, tackles & consumables as per instruction of EIC. Big animals like Cow, Buffalo, Ox & like. |
| 22 | Disposal of dead animal icluding transportation to specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime & bleaching powder etc. & refilling the pit with earth all complete with tools, tackles & consumables as per instruction of EIC. Small animals like Dog, cat, fox, pig, birds & like. |
| 23 | Supply of alum for ETP |
| 24 | Supply of liquid chlorine for ETP |
| 25 | Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water(iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 26 | (C) HORTICULTURE WORKS |
| 27 | Providing and displaying of Aglaonema Parrot Jungle plant (three in one), having ht. 30 cm and above with 20 to 25 leaves, well developed, fresh & healthy in 25 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge. |
| 28 | Providing and displaying of Aglaonema Dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 29 | Providing and displaying of Aglaonema Pseudo bractatum plants, having ht. 30 cm and above with 3 to 4 suckers & 20 to 25 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 30 | Providing and displaying of Aglaonema marentifolium variety plant, having ht. 23 cm to 30 cm with 8 to 10 leaves, well developed, fresh and healthy with colorful leaves in 20 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 31 | Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. |
| 32 | Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 33 | Providing and displaying of Croton Challenger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 34 | Providing and displaying of Croton Baby Golden plant (three in one), having ht. 30cm, multi branches, well developed with fresh and healthy foliage in 25 cm size of Earthen pot/Plastic pot. as per direction of the officer-in-charge. |
| 35 | Providing and displaying of Croton Duck foot (Elite) plant, having ht. 45 cm and above with 3 to 4 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 36 | Providing and displaying of Dracaena Song of India variegated plant, having ht. 30 cm to 45 cm, well developed, fresh & healthy foliage with bright leaves in 20 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge. |
| 37 | Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers / flower buds in 20 cm Earthen pot / Plastic pot as per direction of the officer-in-charge. |
| 38 | Providing and Displaying Adenium Obesum grafted well developed with fresh & healthy 30 to 60 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. |
| 39 | Providing and Displaying Bird of paradise well developed with fresh & healthy 90 to 120 cm ht in 30 cm Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. |
| 40 | Providing and Displaying Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge. |
| 41 | Providing and Displaying Cyprus Golden 30 to 45 cm ht. well developed good Golden colour foliage, Conial Shape in 25 cm Earthen Pots as per direction of the officer-in-charge. |
| 42 | Providing and Displaying Ficus Nuda well developed with fresh & healthy foliage 45 to 60cm spread 75 to 90 cm ht. bushy plant in 35 cm Cement Pot as per direction of the officer-incharge. |
| 43 | Providing and Displaying Ficus reginold well developed fresh & healthy foliage 60 to 75 cm spread 105 to 120 cm ht., Bushy plant in 35 cm Cement Pot as per direction of the officer-incharge. |
| 44 | Providing and stacking of Fishtail palm of ht. 150-180 cm bottom girth 15-20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 45 | Providing and stacking of Foxtail palm of ht. 120-150 cm bottom girth 15-20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 46 | Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 47 | Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 48 | Providing and stacking of Nerium oleander (kaner) of height 45-60 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge. |
| 49 | Providing and stacking of Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. |
| 50 | Providing and stacking Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 51 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 52 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm |
| 53 | Rough dressing the trenched ground including breaking clods. |
| 54 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. |
| 55 | Fine dressing of the ground. |
| 56 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 57 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 58 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately): Holes 45 cm dia, and 45 cm deep. |
| 59 | Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m : Common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 60 | Topairy cutting/shapping of plant removing of cut materials, cleaning, hoeing of plants complete design hoeing of trees (Topairy) watering manure etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge as per direction of officer in charge. Height of Topairy above 120 cm. |
| 61 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge: Flats |
| 62 | Supply of Rogar from authorized dealer as per instruction of EIC. |
| 63 | Supply of DAP from authorized dealer as per instruction of EIC. |
| 64 | Supply of Bone meal from authorized dealer as per instruction of EIC. |
| 65 | Supply of Mustard cake from authorized dealer as per instruction of EIC. |
| 66 | Supply of Bio Fertilizer from authorized dealer as per instruction of EIC. |
| 67 | Supply of Chlorophyriphos from authorized dealer as per instruction of EIC. |
| 68 | Supply of Monosil from authorized dealer as per instruction of EIC. |
| 69 | Supply of Bavistyn from authorized dealer as per instruction of EIC. |
| 70 | Supply of Medicinal plant as per instruction of EIC: Aswagandha |
| 71 | Supply of Medicinal plant as per instruction of EIC: Tulsi |
| 72 | Supply of Medicinal plant as per instruction of EIC: Basak |
| 73 | Supply of Medicinal plant as per instruction of EIC: Bamanhati |
| 74 | Supply of Medicinal plant as per instruction of EIC: Kalmegh |
| 75 | Supply of Medicinal plant as per instruction of EIC: Haritaki |
| 76 | Supply of Medicinal plant as per instruction of EIC: Ashok |
| 77 | Supply of Medicinal plant as per instruction of EIC: Sonapatta |
| 78 | Supply of display plant as per instruction of EIC: Jhuniplum Jhav |
| 79 | Supply of display plant as per instruction of EIC: Farkeria |
| 80 | Supply of display plant as per instruction of EIC: Ganga Jamuna |
| 81 | Supply of display plant as per instruction of EIC: Chinese Rangan |
| 82 | Supply of display plant as per instruction of EIC: Altharnana |
| 83 | Supply of Ficus Bonsai plant as per instruction of EIC. |
| 84 | Supply of Radermachera Indoor Bonsai plant as per instruction of EIC. |
| 85 | Supply of ACP plantation board of size 450 mm x 300 mm x 3 mm thick with 3M reflective sheet (Black & Golden) & fittings with wooden board as per instruction of EIC. |
| 86 | (D) GENERAL MAINTENANCE |
| 87 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 88 | Supplying and filling in plinth with Local sand under floors, including watering, ramming, consolidating and dressing complete. |
| 89 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 90 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 91 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 92 | Centering & shuttering including strutting, propping, etc. & removal of form work for :- Suspended floors, roofs, landings, balconies & access platforms |
| 93 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size). |
| 94 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars |
| 95 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars |
| 96 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1cement : 6coarse sand) |
| 97 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1cement : 6 coarse sand) |
| 98 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1cement : 4coarse sand) |
| 99 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1cement : 4coarse sand) |
| 100 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm |
| 101 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 102 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood |
| 103 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 104 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 105 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 106 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding etc. |
| 107 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. |
| 108 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters |
| 109 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 110 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 111 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 112 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4mm aperture on both sides. |
| 113 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. |
| 114 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 115 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 116 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm |
| 117 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 118 | Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes: 75 mm diameter |
| 119 | Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes: 110 mm diameter |
| 120 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm |
| 121 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm |
| 122 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm |
| 123 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm |
| 124 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Bend 87.5°, 75 mm bend |
| 125 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Bend 87.5°, 110 mm bend |
| 126 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 75 mm Shoe |
| 127 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe |
| 128 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 75 mm |
| 129 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 130 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 131 | 12 mm cement plaster of mix : 1:4 (1cement : 4 fine sand) |
| 132 | 12 mm cement plaster of mix : 1:6 (1cement : 6fine sand) |
| 133 | 6 mm cement plaster of mix : 1:3 (1cement : 3 fine sand) |
| 134 | Neat cement punning |
| 135 | Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of whiting |
| 136 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 137 | Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 138 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 139 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 140 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Old work (one or more coats) |
| 141 | White washing with lime to give an even shade - Old work (two or more coats) |
| 142 | Removing white or colour wash by scrapping & sand papering & preparing the surface smooth i/c necessary repairs to scratches, etc. complete. |
| 143 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 144 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 145 | French spirit polishing : One or more coats on old work. |
| 146 | Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work |
| 147 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 148 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm |
| 149 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). |
| 150 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 151 | Demolishing cement concrete manually / by mechanical means including disposal of materilas within 50 M lead as per direction of EIC - 1:3:6 or richer mix |
| 152 | Dismantling doors, windows & clerestory windows (steel or wood)shutter including chowkatha architrave, holdfast etc complete and stacking within 50 metres lead of area 3 sq.metres and below |
| 153 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below. |
| 154 | Dismantling old plaster or skirting raking out joints & cleaning the surface for plaster i/c disposal of rubbish to the dumping ground within 50 M lead. |
| 155 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 156 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm |
| 157 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm |
| 158 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 159 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 450x300 mm |
| 160 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 15 mm nominal outer dia Pipes |
| 161 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 20 mm nominal outer dia Pipes |
| 162 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 25 mm nominal outer dia Pipes |
| 163 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 15 mm nominal outer dia Pipes |
| 164 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 20 mm nominal outer dia Pipes |
| 165 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 25 mm nominal outer dia Pipes |
| 166 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 40 mm nominal outer dia Pipes |
| 167 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 50 mm nominal outer dia Pipes |
| 168 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm dia nominal bore |
| 169 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore |
| 170 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore |
| 171 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 40 mm dia nominal bore |
| 172 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore |
| 173 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 174 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 175 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 176 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):. With float glass panes of 4.0 mm thickness |
| 177 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board |
| 178 | (E) SUPPLY ITEMS FOR CIVIL WORKS |
| 179 | Supply of Stone Aggregate (single size) : 20 mm nominal size as per instruction of EIC. |
| 180 | Supply of cement in bags of approved make as per instruction of EIC. |
| 181 | Supply of Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles of approved make & quality as per instruction of EIC. |
| 182 | Supply of Chromium plated Brass Wardrobe Knob 50 mm of approved make & quality as per instruction of EIC. |
| 183 | Supply of Chromium plated Brass curtain rod 20 mm dia 1.25 mm thick of approved make & quality as per instruction of EIC. |
| 184 | Supply of Anodised Aluminium sliding door bolt 300x16 mm of approved make & quality as per instruction of EIC. |
| 185 | Supply of Anodised Aluminium sliding door bolt 250x16 mm of approved make & quality as per instruction of EIC. |
| 186 | Supply of Anodised Aluminium tower bolt (barrel type) 300x10 mm of approved make & quality as per instruction of EIC. |
| 187 | Supply of Anodised Aluminium tower bolt (barrel type) 250x10 mm of approved make & quality as per instruction of EIC. |
| 188 | Supply of Anodised Aluminium tower bolt (barrel type) 150x10 mm of approved make & quality as per instruction of EIC. |
| 189 | Supply of Anodised Aluminium handles 125 mm with plate 175 x 32 mm of approved make & quality as per instruction of EIC. |
| 190 | Supply of Pig lead as per instruction of EIC. |
| 191 | Supply of coarse sand as per instruction of EIC. |
| 192 | Supply of Mirror of superior make glass 60x45 cm of approved make & quality as per instruction of EIC. |
| 193 | Supply of GI pipe (Medium duty) of approved make & quality as per instruction of EIC. 15 mm nominal bore |
| 194 | Supply of GI pipe (Medium duty) of approved make & quality as per instruction of EIC. 20 mm nominal bore |
| 195 | Supply of GI pipe (Medium duty) of approved make & quality as per instruction of EIC. 25 mm nominal bore |
| 196 | Supply of GI union of approved make & quality as per instruction of EIC: 15 mm nominal bore |
| 197 | Supply of GI union of approved make & quality as per instruction of EIC: 20 mm nominal bore |
| 198 | Supply of GI union of approved make & quality as per instruction of EIC: 25 mm nominal bore |
| 199 | Supply of Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore of approved make & quality as per instruction of EIC. |
| 200 | Supply of White plastic seat (solid) with lid C.P. brass hinges and rubber buffers of approved make & quality as per instruction of EIC. |
| 201 | Supply of Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia of approved make & quality as per instruction of EIC. |
| 202 | Supply of H.P. or L.P. ball valve with polythene floats: 20 mm dia of approved make & quality as per instruction of EIC. |
| 203 | Supply of 20 mm dia Gunmetal gate valve with wheel of approved make & quality as per instruction of EIC. |
| 204 | Supply of Brass full way valve with C.I. wheel (screwed end) of approved make & quality as per instruction of EIC: 25 mm dia |
| 205 | Supply of C.I. sluice valve (with caps) class I: 100 mm dia of approved make & quality as per instruction of EIC. |
| 206 | Supply of C.I. sluice valve (with caps) class I: 150 mm dia of approved make & quality as per instruction of EIC. |
| 207 | Supply of C.I. sluice valve (with caps) class I: 200 mm dia of approved make & quality as per instruction of EIC. |
| 208 | Supply of Ply wood 5 ply with commercial ply on both faces 6 mm thick of approved make & quality as per instruction of EIC. |
| 209 | Supply of 12 mm thick commercial ply of approved make & quality as per instruction of EIC. |
| 210 | Supply of Anodised Aluminium hanging type door stopper of approved make & quality as per instruction of EIC. |
| 211 | Supply of Nickled Chromium Brass cupboard lock 40 mm size of approved make & quality as per instruction of EIC. |
| 212 | Supply of Common burnt clay F.P.S. (non modular) bricks class designation 7.5 as per instruction of EIC. |
| 213 | Supply of 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size of approved make & quality as per instruction of EIC. |
| 214 | Supply of Chromium plated brackets (curtain rods) of approved make & quality as per instruction of EIC. |
| 215 | Supply of Aluminium tee channel (heavy duty) with rollers and stop end of approved make & quality as per instruction of EIC. |
| 216 | Supply of Hydraulic door closer tubular type Aluminium section body of approved make & quality as per instruction of EIC. |
| 217 | Supply of Hard board 6 mm thick of approved make & quality as per instruction of EIC. |
| 218 | Supply of Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings of approved make & quality as per instruction of EIC. |
| 219 | Supply of Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings of approved make & quality as per instruction of EIC. |
| 220 | Supply of C.P. Brass bibcock 15 mm of approved make & quality as per instruction of EIC. |
| 221 | Supply of C.P. Brass stop cock (concealed) 15 mm of approved make & quality as per instruction of EIC. |
| 222 | Supply of C.P. Brass angle valve 15 mm of approved make & quality as per instruction of EIC. |
| 223 | Supply of Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) of approved make & quality as per instruction of EIC. |
| 224 | Supply of 15 mm PTMT bib cock of approved make & quality as per instruction of EIC. |
| 225 | Supply of 15 mm PTMT bib cock long body with flange of approved make & quality as per instruction of EIC. |
| 226 | Supply of PTMT pillar cock of approved make & quality as per instruction of EIC. |
| 227 | Supply of PTMT - Waste Coupling 38/40 mm of approved make & quality as per instruction of EIC. |
| 228 | Supply of PTMT - Towel Rail (600 mm long) of approved make & quality as per instruction of EIC. |
| 229 | Supply of Stainless steel screws 50 mm of approved make & quality as per instruction of EIC. |
| 230 | Supply of Stainless steel screws 40 mm of approved make & quality as per instruction of EIC. |
| 231 | Supply of Stainless steel screws 30 mm of approved make & quality as per instruction of EIC. |
| 232 | Supply of Stainless steel screws 20 mm of approved make & quality as per instruction of EIC. |
| 233 | Supply of Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS :12817 marked of approved make & quality as per instruction of EIC. |
| 234 | Supply of Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS :12817 marked of approved make & quality as per instruction of EIC. |
| 235 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia of approved make & quality as per instruction of EIC. |
| 236 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia of approved make & quality as per instruction of EIC. |
| 237 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia of approved make & quality as per instruction of EIC. |
| 238 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm nominal dia of approved make & quality as per instruction of EIC. |
| 239 | Supply of Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm nominal dia of approved make & quality as per instruction of EIC. |
| 240 | Supply of 15 mm dia CP pillar cock of Parryware or its equivalent make as per instruction of EIC. |
| 241 | Supply of 2 way CP bib cock 15 mm nominal size with wall flange of Parryware make or its equivalent as per instruction of EIC. |
| 242 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Elbow 15 mm as per instruction of EIC. |
| 243 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Elbow 20 mm as per instruction of EIC. |
| 244 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Elbow 25 mm as per instruction of EIC. |
| 245 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Socket 15 mm dia as per instruction of EIC. |
| 246 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Socket 20 mm dia as per instruction of EIC. |
| 247 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Socket 25 mm dia as per instruction of EIC. |
| 248 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Nipple: 75 mm long 15 mm dia as per instruction of EIC. |
| 249 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Nipple: 75 mm long 20 mm dia as per instruction of EIC. |
| 250 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Nipple: 75 mm long 25 mm dia as per instruction of EIC. |
| 251 | Supply of Polyethylene water storage tank cover and suitable locking arrangement as per instruction of EIC. |
| 252 | Supply of Maruti lock (100 mm) for aluminium window shutters of approved make & quality as per instruction of EIC. |
| 253 | Supply of health faucet 15 mm nominal size with 1 metre long easy flex tube Chromium plated of Hindware make or its equivalent all complete as per instruction of EIC. |
| 254 | Supply of GI socket of approved make & quality as per instruction of EIC: 15 mm nominal bore |
| 255 | Supply of GI socket of approved make & quality as per instruction of EIC: 20 mm nominal bore |
| 256 | Supply of GI socket of approved make & quality as per instruction of EIC: 25 mm nominal bore |
| 257 | Supply of GI nipple 50 mm long of approved make & quality as per instruction of EIC: 15 mm nominal bore |
| 258 | Supply of GI nipple 50 mm long of approved make & quality as per instruction of EIC: 20 mm nominal bore |
| 259 | Supply of GI nipple 50 mm long of approved make & quality as per instruction of EIC: 25 mm nominal bore |
| 260 | Supply of GI long screw 150 mm long of approved make & quality as per instruction of EIC: 15 mm nominal bore |
| 261 | Supply of GI long screw 150 mm long of approved make & quality as per instruction of EIC: 20 mm nominal bore |
| 262 | Supply of GI long screw 150 mm long of approved make & quality as per instruction of EIC: 25 mm nominal bore |
| 263 | Supply of GI plain Tee of approved make & quality as per instruction of EIC: 15 mm nominal bore |
| 264 | Supply of GI plain Tee of approved make & quality as per instruction of EIC: 20 mm nominal bore |
| 265 | Supply of GI plain Tee of approved make & quality as per instruction of EIC: 25 mm nominal bore |
| 266 | Supply of GI elbow of approved make & quality as per instruction of EIC: 15 mm nominal bore |
| 267 | Supply of GI elbow of approved make & quality as per instruction of EIC: 20 mm nominal bore |
| 268 | Supply of GI elbow of approved make & quality as per instruction of EIC: 25 mm nominal bore |
| 269 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Plain Tee 15 mm as per instruction of EIC. |
| 270 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Plain Tee 20 mm as per instruction of EIC. |
| 271 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Plain Tee 25 mm as per instruction of EIC. |
| 272 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Union 15 mm as per instruction of EIC. |
| 273 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Union 20 mm as per instruction of EIC. |
| 274 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785 as per IS : 1239 (Part - I) and threaded to match with GI pipes. PVC Union 25 mm as per instruction of EIC. |
| 275 | Supply of PVC roller for sliding window of approved quality as per instruction of EIC. |
| 276 | Supply of brass spindle and valve of stop cock/bib cock/push cock/pillar 15 mm as per instruction of EIC. |
| 277 | Supply of PVC flush pipe 50 mm for low level cistern of approved brand as per instruction of EIC. |
| 278 | (E) SUBMERSIBLE PUMP |
| 279 | Supplying,fitting and lowering 3.8 kiloWatt 1.66 LPSThree Phase, ISI Marked Submersible Pumpsets of approved make, conforming to IS:8034 latest for use in borewells for handling clear cold water having ISI Marked motor to IS:9283 latest of wet type forcontinuous rating synchronous,Category-B,Duty Type-S1 (minimum head of 150 m, discharge of 50 mm) |
| 280 | supplying, fitting, fixing 20 HP Starters Control Panel for Submersible Pump of approved make,Star Delta Starter -Fully Automatic with Ammeter & Voltmeter (Three Phase/415 V/50Hz,32 A) |
| 281 | THREE CORE FLATCABLES WITH PVCINSULATION ANDSHEATHED with multistrand fl exibleCopper Conductor FORSubmersible Pumps(FORMAXIMUMCONDUCTORTEMPERATURE 70°C OR85°C) duly ISI marked toIS:694 latest of 10 sq.mm |
| 282 | (F) BUSH CUTTING WORK |
| 283 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 284 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender