Tender For Schedule For Repair And Renovation Of Lavatory Block At Faculty Of Agriculture Under Bckv, Mohanpur, Nadia
Tender Value
12.28 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
4 days left
EMD
30710
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nadia → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Schedule For Repair And Renovation Of Lavatory Block At Faculty Of Agriculture Under Bckv, Mohanpur, Nadia
BOQ
| Sl. No. | Item Description |
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 2 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.In ground floor including roof. |
| 3 | Labour for taking out door & window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)Upto area 2.5 Sq.m |
| 4 | Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masonry wall and refitting the same and mending good damages after repairs. (Excluding the cost of necessary repair of damages) or doing any other necessary works. |
| 5 | Labour for taking out steel door and window frame for repairs and re-fixing the same (or replacement by new one) including mending good damages (excluding the cost of repair of damages) and applying a protective coat of paint.Upto one sq.m.area of frame. |
| 6 | Brick work with 1st class bricks in cement mortar (1:6)In foundation and plinth |
| 7 | Ground Floor |
| 8 | First Floor |
| 9 | Second Floor |
| 10 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety |
| 11 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.Grill weighing above 16 Kg./sq.mtr and above |
| 12 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..66mm x 70mm |
| 13 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction. (Cost of concrete will be paid separately)40mm X 6mm, 125mm Length |
| 14 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.In ground floor - 32 mm thick |
| 15 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:75 x 45 x 2.5mm |
| 16 | Anodised aluminium barrel/tower/socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted & fixed with cadmium plated screws:225 mm long x 10 mm dia. bolt. |
| 17 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:With continuous plate base (Hexagonal/ Round rod)125 mm grip x 10 mm dia rod |
| 18 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)4 mm thick |
| 19 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. |
| 20 | Floor : With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.Area of each tile above 0.09 Sq.m - Coloured decorative |
| 21 | Wall : With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.Area of each tile above 0.09 Sq.m - Coloured decorative |
| 22 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. |
| 23 | With 1:6 cement mortar - 15 mm thick plaster - Ground Floor |
| 24 | With 1:6 cement mortar - 15 mm thick plaster - First Floor |
| 25 | With 1:6 cement mortar - 15 mm thick plaster - Second Floor |
| 26 | With 1:4 cement mortar - 10 mm thick plaster - Ground Floor |
| 27 | With 1:4 cement mortar - 10 mm thick plaster - First Floor |
| 28 | With 1:4 cement mortar - 10 mm thick plaster - Second Floor |
| 29 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :Two coats - Luxury Quality |
| 30 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)One Coat - Water based interior grade Acrylic Primer |
| 31 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 32 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :With super gloss (hi-gloss) (with any shade except white)Two coatsOn steel or other metal surface |
| 33 | Supplying,fitting & fixing of 2-Track/3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. incl labour charges for fitting & fixing of alum 2-track/3-track sliding window with fixing of glass (excl cost of glass) all complete as per architectural drawings & direction of EIC10-12 Micron thickness Annodizing film - Natural white |
| 34 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.4mm thick clear glass. |
| 35 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 36 | Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floorPakur Variety - 1:3:6 proportion |
| 37 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). |
| 38 | 25 mm dia |
| 39 | 40 mm dia |
| 40 | Supplying, fitting and fixing bib cock or stop cock. |
| 41 | Chromium plated Bib Cock short body (Equivalent to Code No. 511 and Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 42 | Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar Brand) |
| 43 | Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 44 | Supplying, fitting & fixing 10 litre PVC low-down cistern conforming to IS specification with PVC fittings complete,CI brackets incl two coats of painting to bracket etc. |
| 45 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint 550 mm X 400 mm size |
| 46 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia600 mm long |
| 47 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.900 mm long |
| 48 | Supplying, fitting & fixing Aluminium domical grating.75 mm |
| 49 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 |
| 50 | Single Socketed 3 Meter Length - 10 mm. |
| 51 | Double Socketed 3 Meter Length - 10 mm. |
| 52 | Fittings |
| 53 | Pipe Clip - 110 mm |
| 54 | Double Socketed 1.2 Meter Length - 110 mm |
| 55 | 110 X 110 P Trap - 110 mm |
| 56 | Plain Tee - 110 mm |
| 57 | Bend 87.5º - 110 mm |
| 58 | Vent Cowl - 110 mm |
| 59 | Door Bend (T.S.) - 110 mm |
| 60 | Door Tee - 110 mm. |
| 61 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials). |
| 62 | Above ground - 110 mm dia. |
| 63 | Underground - 110 mm dia. |
| 64 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).580 mm X 440 mm |
| 65 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.635 mm X 395 mm X 420 mm |
| 66 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand.C.P. urinal flush pipe fittings range of one |
| 67 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.450 mm X 300 mm |
| 68 | Supplying, fitting and fixing soap holder.PTMT (Prayag or equivalent) |
| 69 | Supplying, fitting and fixing glass shelf with aluminium guard rails.Ordinary type with 5.5 mm sheet glass 450 mm X 125 mm |
| 70 | Supplying, fitting and fixing towel rail with two brackets.C.P. over brass - 25 mm dia. and 450 mm long |
| 71 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush Pipe |
| 72 | Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished |
| 73 | Supplying, fitting and fixing Waste fittings complete.C.P. over brass40 mm |
| 74 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.E.W.C.Plastic (hallow type) white |
| 75 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).450 mm X 350 mm |
| 76 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.With 'S' trap |
| 77 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)For Exposed Work |
| 78 | 15 mm dia. medium quality |
| 79 | 20 mm dia. medium quality |
| 80 | Dismantling wash basin with brackets with or without waste fittings |
| 81 | Dismantling H.C.I. pipe with fittings including melting lead caulked joints.100 mm |
| 82 | Dismantling Orissa pattern W.C. including taking out of base concrete, if necessary, complete |
| 83 | Dismantling urinal |
| 84 | Dismantling flush pipe of water closet. |
| 85 | Dismantling and refixing marble or mosaic partition |
| 86 | Miscellaneous items for the unforeseen works which may arise during actual execution of work to be done as per direction of EIC. (Payment will be made as per PWD schedule of rates of analysis rate based of or market rate incase of non-schedule item) |
| 87 | Add G.S.T. @ 18% |
| 88 | Add Labour cess @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender