Tender For Smtc Work For 03 Nos Of Road For A Length Of 9.448 Km Under Jharsuguda (R&B) Division (Package-1)
Tender Value
34.62 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
4 days left
EMD
34629
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jharsuguda → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smtc Work For 03 Nos Of Road For A Length Of 9.448 Km Under Jharsuguda (R&B) Division (Package-1)
BOQ
| Sl. No. | Item Description |
| 1 | Kuhakunda chowk (NH-49) to Jhargaon roadRoad Maintanance & Pavement Repair |
| 2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per approved Drawing & Technical Specifications and as per Clause - 201 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 3 | Clearing slab/ box type culverts and pipe culverts including clearing, cleaning and reshapping of upstream and down stream faces of these culverts with in right of way. The job includes disposal of excess material recovered from site including vegetation outside ROW with all leads and lifts complete |
| 4 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per approved Drawing & Technical Specifications and as per Clause -305 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 5 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per approved Drawing & Technical Specifications and as per Clause -406 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 6 | Providing and Applying Primer Coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning the road surface and spreading primer @ 0.60kg per sqm using mechanical means as per Technical Specifications and as per Clause -501 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 7 | Providing Tack coat on prepared bituminous surface with bitumen emulsion (RS) and spreading @ 0.20kg per sqm using mechanical means as per Technical Specifications and as per Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 8 | Providing 50mm compacted thick Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 504 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 9 | Providing 25mm compacted thick S.D.B.C. of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 508 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 10 | Road Safety |
| 11 | Reinforced cement concrete M-15 grade of standard design as per IRC:8-1980 fixing in position including painting & printing etc as per Clause - 805 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 12 | Odinary kilometer Stone |
| 13 | hectometre stone |
| 14 | Providing, fixing retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS circular pipe 65 NB firmly fixed to the ground by means of PCC M25 grade foundation of 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Clause 801 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 15 | 60cm equilateral triangle |
| 16 | 60cm circular |
| 17 | 80cm x 60cm rectangular |
| 18 | 60cm x 45cm rectangular |
| 19 | 90cm octagon |
| 20 | Providing and fixing of direction and place Identification Signs up to 0.9 sqm. Size (1200mm x 700mm) Board retro-reflectorised, cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting, 1.5mm thick supported on mild steel angle post 75m x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing . |
| 21 | Providng and erecting direction and place indentification retro-reflectorised sign as per IRC-67 2012 made of Class-B retro-reflective sheeting of high intendity and hgh intendity prismatic grade sheeting as per ASTM C 49656-09 Typer-III and Type-IV Strictly conforming to cluse-6.7 of IRC 67-2012 and of ACP (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with oter all thickness of 4mm and aluminium thickness of 0.5 mm on both sides supported on Mild steel angle post 75mm x 75mm x 6mm, 2 nos and 3 nos horizontal and 1 nos vertical extra sopporting member of M.S. Square pipe of size 50mm x 50mm x 3mm fiemly fixed to ground by means of properly designed foundation with M-15 grade cement concrete 45mm x 45mm x 75mm, 60cm belowtround level as per approved drawing including cost conveyance royality taxes of all materials , labour, T &P ,excavation, curing etc. complete under supervision of Engineer-In-Charge.3600 x 2400 mm rectangle |
| 22 | Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height |
| 23 | Painting two coats with synthatic enamel paints over a coat of primer on any elevation on road kerb, parapet and guard post for finished item of work including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge. |
| 24 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and as per Clause - 803.4 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 25 | Providing and fixing of road stud 100X100mm direact in aluminium resistant to corrosive effect of salt and grit, fitted with lense reflector installed in concrete 30 cm upto depth (SOR) |
| 26 | NH-49 Beheraguda Chowk to Pikol via Lakhanpur roadRoad Maintanance & Pavement Repair |
| 27 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per approved Drawing & Technical Specifications and as per Clause - 201 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 28 | Clearing slab/ box type culverts and pipe culverts including clearing, cleaning and reshapping of upstream and down stream faces of these culverts with in right of way. The job includes disposal of excess material recovered from site including vegetation outside ROW with all leads and lifts complete |
| 29 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per approved Drawing & Technical Specifications and as per Clause -305 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 30 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per approved Drawing & Technical Specifications and as per Clause -406 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 31 | Providing and Applying Primer Coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning the road surface and spreading primer @ 0.60kg per sqm using mechanical means as per Technical Specifications and as per Clause -501 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 32 | Providing Tack coat on prepared bituminous surface with bitumen emulsion (RS) and spreading @ 0.20kg per sqm using mechanical means as per Technical Specifications and as per Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 33 | Providing 50mm compacted thick Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 504 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 34 | Providing 25mm compacted thick S.D.B.C. of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 508 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 35 | Road Safety |
| 36 | Reinforced cement concrete M-15 grade of standard design as per IRC:8-1980 fixing in position including painting & printing etc as per Clause - 805 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 37 | Odinary kilometer Stone |
| 38 | hectometre stone |
| 39 | Providing, fixing retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS circular pipe 65 NB firmly fixed to the ground by means of PCC M25 grade foundation of 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Clause 801 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 40 | 60cm equilateral triangle |
| 41 | 60cm circular |
| 42 | 80cm x 60cm rectangular |
| 43 | 60cm x 45cm rectangular |
| 44 | 90cm octagon |
| 45 | Providing and fixing of direction and place Identification Signs up to 0.9 sqm. Size (1200mm x 700mm) Board retro-reflectorised, cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting, 1.5mm thick supported on mild steel angle post 75m x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing . |
| 46 | Providng and erecting direction and place indentification retro-reflectorised sign as per IRC-67 2012 made of Class-B retro-reflective sheeting of high intendity and hgh intendity prismatic grade sheeting as per ASTM C 49656-09 Typer-III and Type-IV Strictly conforming to cluse-6.7 of IRC 67-2012 and of ACP (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with oter all thickness of 4mm and aluminium thickness of 0.5 mm on both sides supported on Mild steel angle post 75mm x 75mm x 6mm, 2 nos and 3 nos horizontal and 1 nos vertical extra sopporting member of M.S. Square pipe of size 50mm x 50mm x 3mm fiemly fixed to ground by means of properly designed foundation with M-15 grade cement concrete 45mm x 45mm x 75mm, 60cm belowtround level as per approved drawing including cost conveyance royality taxes of all materials , labour, T &P ,excavation, curing etc. complete under supervision of Engineer-In-Charge.3600 x 2400 mm rectangle |
| 47 | Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height |
| 48 | Painting two coats with synthatic enamel paints over a coat of primer on any elevation on road kerb, parapet and guard post for finished item of work including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge. |
| 49 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and as per Clause - 803.4 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 50 | Providing and fixing of road stud 100X100mm direact in aluminium resistant to corrosive effect of salt and grit, fitted with lense reflector installed in concrete 30 cm upto depth (SOR) |
| 51 | RD road Bhadrapali Gudum via GP Office roadRoad Maintanance & Pavement Repair |
| 52 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per approved Drawing & Technical Specifications and as per Clause - 201 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 53 | Clearing slab/ box type culverts and pipe culverts including clearing, cleaning and reshapping of upstream and down stream faces of these culverts with in right of way. The job includes disposal of excess material recovered from site including vegetation outside ROW with all leads and lifts complete |
| 54 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per approved Drawing & Technical Specifications and as per Clause -305 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 55 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per approved Drawing & Technical Specifications and as per Clause -406 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 56 | Providing and Applying Primer Coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning the road surface and spreading primer @ 0.60kg per sqm using mechanical means as per Technical Specifications and as per Clause -501 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 57 | Providing Tack coat on prepared bituminous surface with bitumen emulsion (RS) and spreading @ 0.20kg per sqm using mechanical means as per Technical Specifications and as per Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 58 | Providing 50mm compacted thick Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 504 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 59 | Providing 25mm compacted thick S.D.B.C. of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 508 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 60 | Road Safety |
| 61 | Reinforced cement concrete M-15 grade hectometre stone of standard design as per IRC:8-1980 fixing in position including painting & printing etc as per Clause - 805 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 62 | Providing and fixing of direction and place Identification Signs up to 0.9 sqm. Size (1200mm x 700mm) Board retro-reflectorised, cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting vide clause 801.3 ,fixed over aluminium sheeting, 1.5mm thick supported on mild steel angle post 75m x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing . |
| 63 | Providng and erecting direction and place indentification retro-reflectorised sign as per IRC-67 2012 made of Class-B retro-reflective sheeting of high intendity and hgh intendity prismatic grade sheeting as per ASTM C 49656-09 Typer-III and Type-IV Strictly conforming to cluse-6.7 of IRC 67-2012 and of ACP (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with oter all thickness of 4mm and aluminium thickness of 0.5 mm on both sides supported on Mild steel angle post 75mm x 75mm x 6mm, 2 nos and 3 nos horizontal and 1 nos vertical extra sopporting member of M.S. Square pipe of size 50mm x 50mm x 3mm fiemly fixed to ground by means of properly designed foundation with M-15 grade cement concrete 45mm x 45mm x 75mm, 60cm belowtround level as per approved drawing including cost conveyance royality taxes of all materials , labour, T &P ,excavation, curing etc. complete under supervision of Engineer-In-Charge.3600 x 2400 mm rectangle |
| 64 | White washing two coats with shell lime |
| 65 | Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height |
| 66 | Painting two coats with synthatic enamel paints over a coat of primer on any elevation on road kerb, parapet and guard post for finished item of work including cost, conveyance & other taxes of materials, cost of labour, T&P etc complete as per the direction of the Engineer-in-charge. |
| 67 | Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old bags ans /or compressed air to receive bituminious surface. |
| 68 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and as per Clause - 803.4 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 69 | Providing and fixing of road stud 100X100mm direact in aluminium resistant to corrosive effect of salt and grit, fitted with lense reflector installed in concrete 30 cm upto depth (SOR) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender