Tender For Special Repair Of Bldg No P-182 ,T-97,T-98,T-99,T-100 ,T-101 & T-102 At 11 Armd Regt And Other Sanctioned Work At Nams (2Nd Call).
Tender Value
46.37 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
3 days left
EMD
92751
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Bldg No P-182 ,T-97,T-98,T-99,T-100 ,T-101 & T-102 At 11 Armd Regt And Other Sanctioned Work At Nams (2Nd Call).
BOQ
| Sl. No. | Item Description |
| 1 | M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, including dismantling of old bricks complete all as specified and directed. |
| 2 | Taking down cement plaster on brick/stone/concrete walls incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed. |
| 3 | M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed. |
| 4 | Material and labour for 12 mm thick rendering on fair faces of brick or concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 6 | Material and labour for applying two coats of oil bound distemper over a coat of primer including 3 mm thick wall care putty on wall of newly plasterd surfaces of walls, pillars cornces etc. complete all as specified and directed. |
| 7 | S & F steel work in tubular trusses and tubular posts, vertical/horizontal bar, chin up bar and similar works including special shaped washers, chequered plate etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint including dismantling of old mild steel of any description complete all as specified and directed. |
| 8 | All as per above item No. 7.00 here-in –before but except mild steel. |
| 9 | S&F for Pre- painted galvaume aluminum zinc coating GI based manglore/trapezoidal/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding, fixed with self tapping screws as incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC. Note- Design/Pattern/colour of roofing sheet sheet to decided and approved by EIC/GE. |
| 10 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridge hipe valley to wall, fixed with self tapping screws complete all as specified and directed. |
| 11 | M&L for Prepration of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified |
| 12 | M&L for powder coated aluminium window sliding type (Bombay pattern) with frame of 1.5mm thick aluminium sections including 5.00mm thick tinted glass and stailess steel filter wire mesh fixed with & including anodized aluminium snap beading, glazing clips, joining clips, screws, standard rubber gasket, handles/ Knobs two nos. for each window , MS rollers two nos. for each window shutter and including stainless steel wiremesh fixing with shutter etc complete all as specified and directed with following specifications:-(a) Aluminium section for window frame =101.50x44.45x2mm (b) Aluminium section for styles and rails of shutter = 44.0 x18.0x2mm(c) Aluminium ventilator frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.Make of aluminium sections:- M/S JINDAL or M/S HINDALCO or M/S INDAL as approved by GE. (d) Aluminium window frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed. |
| 13 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed. |
| 14 | Material & labour for gypsum board panel 12 mm thick as in ceiling including T section accessory of galvenised mild steel, GI suspender all as per manufacturer design confirming to IS 2095 and IS 2542 – 1981. Weight of board not less than 7 Kg per Sqm including two coat of Oil bound distemper over a coat of plaster of paris including taking down complete all as specified and directed. Note: - Rate quoted shall be deemed to be inclusive of gypsum board, frame work and suspender. |
| 15 | M&L for Prepration of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified |
| 16 | S&F UV marble pvc wall panel sheet 3mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed |
| 17 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed. Please Enable Macros to View BoQ information |
| 18 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender