Tender For Repair To Joinery And Hangers Door And Repairs To Roof Sheet, Roof Treatment And Allied Work Services In Certain Buildings In Technical Area At Afs Yelahanka.
Tender Value
48 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
17 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery And Hangers Door And Repairs To Roof Sheet, Roof Treatment And Allied Work Services In Certain Buildings In Technical Area At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or frames n exceeding 1.5 Sqm each (Without taking off shutters from the frame) of any description complete all as specified. |
| 2 | Taking down door chowkats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm (without taking off shutters from the frame) of any description complete all as specified. |
| 3 | Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified. |
| 4 | S&F Pressed steel frames 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified. |
| 5 | M&L for Plain Cement Concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) filling in chowkats all as specified and directed. |
| 6 | S&F 35 mm thick Flush shutters, solid core construction, with blockboard core and plywood face panels, commercial type on both sides all as specified and directed. |
| 7 | M&L 35 mm thick wire gauzed and skeleton shutters (1st class softwood), open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc. sizes of members of shutters as specified in fitted to chowkats all as specified and directed. |
| 8 | S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixed in opening as per specification and drawing including making good to hold fast, Complete all as specified and as directed. |
| 9 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, Complete all as specified and as directed. |
| 10 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for frame of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ aneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 11 | S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 12 | M&L for powder coated aluminium anodised window sliding type (3 shutters type) with sash bars, aluminium sections weighing 0.55 Kg/m(min) including stainless steel wire mesh , necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame, including S&F 5 to 6 mm thick plain glass and all as specified & directed. |
| 13 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all complete as per requirement and direction of Engineer-in-charge. |
| 14 | S&F in repair aluminium (extruded section body) door closer hydraulically, regulated, designation No 3, universal type, suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 kg and fixed, Complete all as specified and as directed. |
| 15 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 16 | S&F Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc and incl glazing and painting all as shown on drawing No. AFB /TD/A/002 dated 21 Mar 2023 as applicable complete. Note: (i) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs.(ii) Glazing & painting shall not be measured & paid for separately. |
| 17 | Hacking out old broken glass (any thickness, size, quality or description) form metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, Complete all as specified and as directed. |
| 18 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beading in square n. exc. 0.5 Sqm in each pane, Complete all as specified and as directed. |
| 19 | S&F sheet glass ordinary quality 4.8 mm thick and glazing with oil putty in square n exc 0.5sq.m in each panes in each pane fixed with aluminium window and ventilator all as directed. |
| 20 | S&F sheet glass ordinary quality 4.8 mm thick and glazing with oil putty in square exc 0.5sq.m in each panes in each pane fixed with aluminium window and ventilator all as directed. |
| 21 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed. |
| 22 | S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed. |
| 23 | S&F for brass, barrel tower bolt 150mm with cast or sheet barrel and of extruded section rolled or cast bolts and fixed complete all as specified. |
| 24 | S&F for extruded brass handle 150mm fabricated type polished complete all as specified. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 26 | S&F MS framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work etc con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 27 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling all as specified and directed. |
| 28 | S&F 0.63 mm thick Galvanised, corrugated mild steel shetting with two corrugations side lap, fixed with screw in roofs, walls, hanger door etc. with grade of zinc coating 275, incl dismantling etc complete all as specified and as directed. |
| 29 | Supply only mild steel plain sheet 1.60 mm thick covering to door shutter and top cover of rolling shutter cover cut to size, edges beaded as directed, holes punched, incl dismantling all as specified and directed. |
| 30 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth including two coat of Synthetic enamel paint over a coat of pink primer on wooden surfaces of any description complete all as specified and as directed. |
| 31 | M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of primer to steel surface all as specified and directed. |
| 32 | M&L Preparing old steel surfaces of any description and applying one coat of Synthetic enamel Paint all as specified and directed. |
| 33 | M&L Vitrified ceramic light shade tiles of 10mm thick and area of each tiles n. exceeding 0.36 Sqm for flooring over 15 mm thick screed bed in CM 1:6, incl dismantaling of exiting tiles all as specified and directed. |
| 34 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) incl dismantaling of exiting tiles complete all as directed and specified. |
| 35 | M&L for glazed ceramic colour tiles, size 450x300x7mm size as in walls, set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc incl dismantling complete all as specified & as directed. |
| 36 | M&L Repair to de-railed sliding steel Hanger door, over all size approx 63.00m x 13.60m having leafs of size approx 7.00 m x 12.00m each, for smooth functioning of gate by welding where required, dismantling, straightening and refixing in position damaged steel members, cutting and levelling bottom unlevelled PCC stucking to steel members to steel rollers tightening / replacing of worn out nuts & bolts, welding and re adjusting / replacing top / bottom steel rollers, greasing to all movable parts complete all as specified and as directed.Note : (i) T&P required for taking down the door for repair and re-fixing the same shall be arranged by the contractor at his own and the unit rate quoted shall include the cost thereof. No claim whatsoever on this account shall be entertained.(ii) Replacement of defective steel members, items shall be measured and paid as 'Supply only' against respective item of this schedule. |
| 37 | Repairing of rolling shutter, push type, size n.exc 10sqm each for smooth functioning by re-posting of laths, riveting to old defective rivets, tightening nuts and bolts, re-stretching of spring, greasing to movable parts and at guide channel including taking out and re-fixing rolling shutter in position complete all as specified and directed.Note : (i) T&P required for taking down the door for repair and re-fixing the same shall be arranged by the contractor at his own and the unit rate quoted shall include the cost thereof. No claim whatsoever on this account shall be entertained.(ii) Replacement of defective steel members, items shall be measured and paid as 'Supply only' against respective item of this schedule. |
| 38 | Repairing of rolling shutter, push type, size exc 10sqm but n exc 30 sqm each for smooth functioning by re-posting of laths, riveting to old defective rivets, tightening nuts and bolts, re-stretching of spring, greasing to movable parts and at guide channel including taking out and re-fixing rolling shutter in position complete all as specified and directed.Note : (i) T&P required for taking down the door for repair and re-fixing the same shall be arranged by the contractor at his own and the unit rate quoted shall include the cost thereof. No claim whatsoever on this account shall be entertained.(ii) Replacement of defective steel members, items shall be measured and paid as 'Supply only' against respective item of this schedule. |
| 39 | Cleaning of existing bottom rail of hangar door, including removal of dirt, dust, rust, old grease and other foreign deposits, thorough cleaning of rail surface and application of suitable grease/lubricant to ensure smooth and trouble-free movement of the hangar door, complete as directed. |
| 40 | Cleaning and greasing of existing guide rails and rollers of hangar door, including removal of dirt, dust, rust, old grease and other foreign deposits, thorough cleaning and application of suitable grease/lubricant to guide rails and rollers for smooth and efficient operation of hangar door, complete as directed. |
| 41 | Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as specified and directed. |
| 42 | M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls all as specified and directed. |
| 43 | M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall all as specified and directed. |
| 44 | M&L for preparation of newly plastered surface of walls including Chalk whiting, on plastered surfaces, preparatory to distempering and applying two coat of oil emulsion distemper on wall surface, complete all as specifed. |
| 45 | M&L for preparation of newly surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and as directed. |
| 46 | S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling all as specified and directed. |
| 47 | M&L for steel work in tubular trusses, post, purlin, grill work including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 grade St-240 complete all as specified and directed. |
| 48 | M&L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, including cleaning the surface etc complete all as specified & directed. |
| 49 | Demolition of concrete( unreinforced) in ground floors/slab and pavings n exc 15 cm thickness (below or above ground level) etc all as specified and as directed. |
| 50 | M&L 40mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) with over cement slurry 3 kg of cement per sqm finished even and smooth without using extra cement complete all as specified and directed. |
| 51 | M&L for rendering 10mm thick (average) in cement mortar 1:3 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. |
| 52 | M&L for laying/fixing TPO membrane of non flammable water proofing of roof which shall be a 1.50 mm thick loose laid membrane using FOSROC Proofex ORG membrane or its equivalent in STP/CIPY/SIKA/PIDILITE DR FIXIT, in layers overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand appiled or by means of automatic machines and the roll either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of non woven geotextile fiber. The separation layer provided to prevent the mechanical abrasion and and cushioning between the fosroc proofex ORG and the concrete sub structure. The termination of Fosroc Proofex ORG by aluminium strip anchoring. Note: Work shall be executed by authorized applicator with prior experience of more than 5 years on applying similar system. |
| 53 | Dismantling of old Ceiling boards (Fibre,pulp,insulation,etc) or insulation boards /slabs blankets,including cover fillets and frame work complete all as specified and as directed. |
| 54 | S&F Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of fully perforated 12mm thick micro tegular edge or 10mm thick square edge of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0 .50 to 0.75 as per IS 8225 :1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and L-shape level adjuster of size 85x25x2mm .Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing as per directions of the Engineer-in-Charge. |
| 55 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 56 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 57 | M&L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (using 20 mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:6 incl demolition of exiting complete all as specified and directed. |
| 58 | M&L for Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to wall surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat over a coat of wall putty 1 to 2mm thick on new surface of wall as as recommended by manufacturer of interior emulsion complete all as specified and directed. |
| 59 | M&L for Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat including of new surface of wall recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed. |
| 60 | M&L for Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to wall surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat over a coat of wall putty 1 to 2mm thick include complete removal of existing finishes of wall as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed. |
| 61 | M&L for Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat including complete removal of existing surfaces as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender