Tender For special Repair Of Batra Auditorium And E/M Work For Bldg No Np-11 At 1 Ttr Under Ge (West) Jabalpur
Tender Value
47.21 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
19 days left
EMD
94420
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Batra Auditorium And E/M Work For Bldg No Np-11 At 1 Ttr Under Ge (West) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down, 20mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed |
| 2 | Taking up or down, 25 mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed |
| 3 | Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 Sqm Each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and directed |
| 4 | Taking down chowkats and frame n.exc 1.5 Sqm Each (Door/window/Ventilator ) including shutters without taking off shutters from the frame and removing from site complete all as specified and directed |
| 5 | Taking down shutters of any description n.exc 1.00 Sqm Each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed by engr-in-charge. |
| 6 | Taking down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm Each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed by engr-in-charge. |
| 7 | M & L for taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. |
| 8 | Demolition of brick /stone walls built in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 9 | Dismantling of Stone slabs and kota stone, Granite, Chequered tiles, Paver block, etc of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed. |
| 10 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 11 | Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 13 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roofcoverings complete all as specified and directed . |
| 14 | M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6,complete all as specified and directed |
| 15 | Material and labour for 15mm thick (in two layers 10mm+5mm) cemet plalster in CM 1:4 over brick wall / concrete surfaces using WPC, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (Note-WPC will be measurd and paid seprately) |
| 16 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed. |
| 17 | Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 18 | Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 19 | M&L for cement concrete type B1 1:2:4 (20mm graded aggregate)as in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,Hold fast and similar works water troughs and the like including weathering, slightly rouinded for chamfered angles and necessary formwork all as specified and as directed |
| 20 | S & F Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed by Engineer-in-Charge. |
| 21 | S & F Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 22 | S & F Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender