Tender For Special Repair To Bldg No P-181, 182, 183, 184 And 185 At Bhdc Under Ge (E/M) Base Hospital, Delhi Cantt-10
Tender Value
2.31 Crore
Estimated cost
Bid Submission
21 Oct 2026
20 days left
EMD
3.06 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-181, 182, 183, 184 And 185 At Bhdc Under Ge (E/M) Base Hospital, Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Brick tiles or terracing tiles, single layer on roofs . |
| 2 | Demolition Mud in roofs, any thickness, including plastering including sweeping clean and washing down with water to remove dust, etc |
| 3 | M&L for providing plain cement concrete, type B-1, 1:2:4 (using 12.5 mm graded stone agg) as in roof kerbs, padding, Gola, rounded or chamfered on edges complete all as specified and directed. |
| 4 | M&L for 20 mm thick rendering on concrete surface of roof with cement mortar 1:4 finished even and fair including mixing of water proofing compound as per manufacturers instruction complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately) |
| 5 | Supply only water proofing compound. |
| 6 | M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 4 mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps (overlaps to be thermo fused by flame) and applying one coat of hot blown bitumen 85/25 @ 0.70 Kg/Sqm complete all as specified and directed. Note :- 1. Water proofing treatment shall be got carried out by the OEM or their authorised applicator only. Contractor will submit MoU with the authorised applicator and shall be approved by GE before commencement of work. OEM shall provide warranty of 05 five years for the waterproofing work.2. Bitumen primer, bitumen and membrane shall be of same make / manufacturer. 3. The APP Membrane to be inserted in the parapet wall/wall by cutting chases of atleast 65mm X 50mm size& making good in CM 1:3. |
| 7 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 onwaterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in theratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement& marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3cuts complete, including providing skirting upto 150 mm height along the parapet wallsin the same mannerM & L for Cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed; set jointed and pointed in neat cement slurry over 20 mm th screed bedding layer of CM 1:6 complete all as specified and directed. |
| 8 | Demolition of brick work built in cement mortar complete all as specified and directed |
| 9 | M & L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1 : 6 complete all as specified and directed. |
| 10 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 11 | M&L rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick surfaces of walls finished the surface even & Smooth without using extra cement complete all as specifed & as directed. |
| 12 | M&L 10 mm thick plastering in Cement Mortar 1:3 finished even and smooth w/o using extra cement on brick surface of ceilings complete all as specifed & as directed. |
| 13 | M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finished and even & fair without using extra cement complete all as specifed & as directed. |
| 14 | M&L for preparing the newly plastered wall surface then applying 2mm thick wall care putty followed by two coat of oil bound distemper over one coat of alkali resistant primer complete all as specified and directed. |
| 15 | M&L for two coat of oil bound distemper including prepration of new ceiling surface and priming plastered and other surfaces with alkali resistant priming paint over 1 mm thick wall care putty complete all as specified and directed. |
| 16 | M & L for preparing the newly plastered wall surface and applying two coat of wheather proof apex over one coat of alkali resistant primer complete all as specified and directed. |
| 17 | M & L for complete removal of existing treatment from old decorated wall surface by scrapping with electric regmal machine/hand scrapper then applying 2mm thick wall care putty followed by two coats of Oil bound distemper over one coat of alkali resistant primer of any tint on walls complete all as specified and directed. |
| 18 | M & L for preparing the newly plastered wall surface and applying two coat of wheather proof apex over one coat of alkali resistant primer complete all as specified and directed. |
| 19 | M & L for complete removal of existing treatment from old decorated ceiling surface by scrapping with electric regmal machine/hand scrapper then applying 1mm thick wall care putty followed by two coats of Oil bound distemper over one coat of alkali resistant primer of any tint on ceiling complete all as specified and directed. |
| 20 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 ( 1 cement : 1/2 coarse sand:2 using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings included forming groove of uniform size 15 mm wide and 15 mm deep as per approved pattern, complete all as specified and as directed. |
| 21 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 22 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 23 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 24 | Supply and laying of CPVC 25 mm OD pipes SDR 11, ISI marked & plain CPVC SDR 11 fittings on walls/ ceilling or laying in floors complete all as specified and directed with fitting as required |
| 25 | Supply and laying of CPVC 20 mm OD pipes SDR 11, ISI marked & plain CPVC SDR 11 fittings on walls/ ceilling or laying in floors complete all as specified and directed with fitting as required |
| 26 | Supply and laying of CPVC 16 mm OD pipes SDR 11, ISI marked & plain CPVC SDR 11 fittings on walls/ ceilling or laying in floors complete all as specified and directed with fitting as required |
| 27 | Refixing old 20 mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 28 | Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed. |
| 29 | M&L Vitrified tiles dark /shade double charged /ultra charged Ist quality 10mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 30 | All as per item No.29 here-in-before but on vertical surfaces over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and as directed. |
| 31 | M & L for Non-skid Coloured rectified Ceramic tiles 7 to 8 mm thick (Square/rectangular) area of tile exc 0.11 Sqm but not exceeding 0.18 Sqm in floors, set and jointed in neat cement to match the shade over and including 15 mm thick screed bed in CM 1 : 6 complete all as specified and as directed. |
| 32 | M & L for Coloured rectified Glazed ceramic tiles in vertifical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in colour cement to match over and including 10 mm th rendering in CM 1:4 complete all as specified and as directed. |
| 33 | Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc and including disposal of all debris exc 1.5 KMtr not exc 5 Km complete all as specified and directed. |
| 34 | M&L 20-25 mm thick machine cut kota stone flooring laid over and including screed bed or bedding layer mortar 20mm thick in cement mortar 1:6 for laying floor finished jointed and pointed with grey cement slurry mixed with pigments to match the shads incl rubbing and polishing upto mirror image complete all as specified and as directed. |
| 35 | M&L 20 - 25 mm thick machine cut kota stone in riaser of steps,skirting/dado and pillar laid over 10 mm thick rendering coat in cement mortar 1:4 complete all as specified and as directed. |
| 36 | M&L for 20 mm thick Granite work in cooking platforms, Steps, partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & half curving the edges of granite including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 37 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white with ‘P’ or ‘S” trap, any pattern including Seat Cover (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 38 | S & F in repair 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 39 | S&F in repair Vitreous China Urinal,Half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, complete all as specified and directed. |
| 40 | S&F in repair 15mm bore Angle valve, ISI marked with flange complete all as specified and directed. Make : Cera CAT PART NO : CQ 208 or equivalent as per approved makes |
| 41 | S&F in PVC connection 15mm bore with PTMT nuts of length 600mm complete all as specified and directed. |
| 42 | S&F in repair One piece white Wash Basin with Pedestal fo size 560 x 415 x 820 mm complete all as specified and directed. |
| 43 | S&F in repair Vitreous china urinal partition white of size 310 x 700mm complete all as specified and directed. |
| 44 | S&F in repair Waste coupling 32mm bore dia of PTMT half threaded for WHB complete all as specified and directed. |
| 45 | S&F in repair Waste coupling 32mm bore dia of PTMT half threaded for urinal complete all as specified and directed. |
| 46 | S&F in repair Corrugated Waste Pipe 32 mm dia for urinal complete all as specified and directed. Make : |
| 47 | S&F in repair Corrugated Waste Pipe 32 mm dia for WHB complete all as specified and directed. |
| 48 | S&F in repair CP Bib Cock, ISI marked 15mm long body with flange complete all as specified and directed. |
| 49 | S&F in repair CP Soap Dish including chromium plated brass screws and plastic cleats complete all as specified and directed. Make : Prayag Cat No : BA-05 or equivalent as per approved makes |
| 50 | S&F in repair Chromium plated 2 in 1 Faucet (1mtr Braided Tube), ISI marked with Hook complete all as specified and directed.Make : Prayag Cat No BEA-95-S or equivalent as per approved makes |
| 51 | S&F in repair PEG Set 6 (Zinc) complete all as specified and directed. |
| 52 | S&F in repair CP Towel Rail 600mm long, ISI marked fixed with and including Chromium plated brass screws and plastic cleats complete all as specified and directed. Make : Prayag Cat No : BA-01 |
| 53 | S&F in repair Full Glass Shelf 450 mm (with brass brackets) complete all as specified and directed. Make : Prayag Cat No : BEA-55 or equivalent as per approved makes |
| 54 | S & F in repair 15mm bore Pillar cock, ISI marked with swivel swan neck spoout and aertor for WHB complete all as specified & directed. Make : Cera Cat No.: F1099104 or equivalent as per approved makes |
| 55 | Supply only in replacement 15 mm concealed stop valve chromium plated with elegant knob screwed down high pressure complete including CP cap complete all as specified and as directed. Make – Jaquar or equivalent as per approved makes |
| 56 | S & F in repair 80 mm dia CP Overhead Shower, ISI marked complete all as specified and directed. Make : CERA Cat No : F7020310AB or equivalent as per approved makes |
| 57 | Dismantling water tanks exc 250 & n exc 500 ltr capacity and removing to store complete all as specified and directed. |
| 58 | S&F 500 ltr Rotational moulded Polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked triple layered hoisted and fixed in position complete all as specified and directed. |
| 59 | S&F in repair 20 mm bore dia Gun metal gate valve, ISI marked with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 60 | S&F in 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwedfor iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) |
| 61 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 62 | S&F precast cement concrete louvres and jallies 25 mm thick type B0 1:2:4, set in CM 1:6 (mea sured solid), including all mouldings complete all as specified and directed. |
| 63 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 64 | M & L for channel, angle, or tee sections, fixed independently, without connecting plates, etc complete all as specified and directed. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe.410.Gde-E-250 |
| 65 | M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks ,Chajja and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 66 | M&L for cement concrete type B1 1:2:4 using 20mm graded stone aggregate as in coping, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates complete all as specified and directed.. |
| 67 | Taking down chowkhat or frame without taking off shutters of any description exc 1.5 sqm and n-exc 4 sqm each complete all as specified and directed. |
| 68 | S & F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 69 | S & F IInd Class HW 35 mm tk Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 70 | S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 71 | S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 72 | S&F 150mm long Mild steel pressed handles, oval type, stove enamelled black bolt complete all as specified and directed. |
| 73 | S&F 200mm Mild steel barrel tower bolts, stove enamelled black, with bright boltand fixed complete all as specified and directed. |
| 74 | S&F 100mm long Mild steel butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 75 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification complete all as specified and directed. |
| 76 | S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 77 | S&F 150 mm Aluminium handles, cast type anodised complete all as specified and directed. |
| 78 | S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed. |
| 79 | S&F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 80 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 81 | M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 82 | Taking down chowkhat or frame without taking off shutters of any description n exc 1.5 sqm each complete all as specified and directed. |
| 83 | S & F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed. |
| 84 | S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 85 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 86 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification complete all as specified and directed. |
| 87 | S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 88 | S&F 150 mm Aluminium handles, cast type anodised complete all as specified and directed. |
| 89 | S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed. |
| 90 | S&F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 91 | S & F Powder Coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (minimum thickness of powder coating 50 micron) |
| 92 | S & F Powder Coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 93 | S&F in repair Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed. |
| 94 | Hacking out old broken glass (any thickness) from metal frame/aluminium frames including punching or drilling out old galzing pins complete all as specified & directed. |
| 95 | S & F 4.0 mm thick ordinary glass glazing with oil putty in square n exc 0.5 Sqm in each pane or rubber beading as required complete all as specified & directed. |
| 96 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 97 | S & F 2 mm th Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, Chajja,wall etc complete all as specified and directed. |
| 98 | Demolition of cement concrete (un reinforced) in filling of sunken floors of WC. Taking down existing damaged vitreous China squattiing pan. Taking down existing water proofing treatment of any description from sides and bottom of sunken floors, roughening surfaces of old concrete surface by picking, sweeping clean and washing down with water to remove dust, etc and carrying out the following :-(a) Supply and fixing of 40 mm bore, PVC pipe, 450 mm long as in spout of sunken floor. (b) Rendering, 15 mm thick screed bed or bedding layer of cement mortar (1:2), mixed with Pidiproof LW + @ 0.30 ltr per bag of cement as per manufactures instructions on fair faces of brick wall or concrete surfaces of sides and bottom of sunken floor and finishing surface even and smooth without using extra cement.(c) providing waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 kg/Sqm, applying hot applied bitumen 85/25 @ 1.20 Kg/Sq M, providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00 mm thick, weighing 3.50 Kg/Sq M with surface finish of white mineral, by torch on application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse directiion on sides and bottom of sunken floor.Note : - Approx size of sunken floors in WC, 2.50 Sqm and 450 mm (D). (d) M&L for providing PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in mass concrete in sunken floor complete all as specified and directed. |
| 99 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 100 | S & F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. |
| 101 | S&F in repair box type Cup Board made out of 18/19mm thick PVC moulded solid board, one side prelaminated, with self and shutter, full size fitted under/ above the kitchen cooking platform and other platform including provision of all fixing arrangement /fitting & fixtures (magnetic catches, piano hinges, knob, SS Screws etc) complete all as specified and as directed. (Note: For Payment purpose, only front area of cupboard shutter shall be measured). |
| 102 | Dismantling of CI pipes & fitting of any description & position up to 100 mm dia complete all as specified & directed. |
| 103 | PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 104 | S&F PVC (SWR) 75 mm bore pipe single socketed, in any length with rubber ring jointes , laid in trenches or in floor complete all as specified and directed. |
| 105 | S&F PVC (SWR) 110 bore pipe single socketed, in any length with rubber ring jointes , laid in trenches or in floor complete all as specified and directed. |
| 106 | S&F PVC (SWR) 110 bore pipe single socketed, in any length with rubber ring jointes ,fixed to wall complete all as specified and directed. |
| 107 | S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 108 | S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 109 | S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 110 | S&F 110 x 75 mm PVC (SWR) reducers complete all as specified and directed. |
| 111 | S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 75 mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 112 | S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 113 | S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 114 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with acces door complete all as specified and directed. |
| 115 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 116 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 117 | M&L for 100mm PCC type D -2 (1:4:8) using 40 mm graded crushed stone aggregate as in Sub base complete all as specified and directed. |
| 118 | M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, ISI marked, glossy finish, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 119 | S&F Kerb stone of 300x300x 100mm thick precasted plain cement concrete type B0 , 1:2:4 , using 12.5mm graded crushed stone aggregate incl earth work for laying kerb stones complete all as specified and directed. |
| 120 | S&F in repair stainless steel curtain rods of 25 mm dia with fixing brackets stops, rollers compete all as specified and as directed. |
| 121 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth getting out in any type of soil complete all as specified and directed. |
| 122 | Returing and filling in, including spreading levelling, watering and well ramming in layers n exc 25cm thick in excavated soil complete all as specified and directed. |
| 123 | Removing excavated soil to a distance exc 250m and depositing where directed at a level n exc 500m and depositing where directed. Complete all as specified and directed. |
| 124 | Demolition and breaking up drain pipes (Salt glazed stoneware)/pvc set in cement mortar 150 mm internal dia of pipe complete all as specified and directed. |
| 125 | M&L for 150mm nominal size (DWCPE) Double wall corrugaged poly ethylene pipe ((SNB) including all fixing accessories of fittings like socket/spigot joint with elastomeric sealing ring, rubberring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed. |
| 126 | M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and against the sides of pipes after they are laid and tested in bores of pipe150mm dia complete all as specified and directed. |
| 127 | M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and against the sides of pipes after they are laid and tested in bores of pipe 200mm dia complete all as specified and directed. |
| 128 | S& F in repair 75mm thick factory made SFRC manhole/ drain covers of approved shape & size complete all as specified and as directed. Make : Polycrete or equivalent. |
| 129 | M&L 75 mm thick PCC 1:3:6, type C1, using (20mm graded aggregate) as in Plinth protection and finished the surface fair & even without using extra cement, laid in panel , including filling the joints with sand mixed with bitumen in 1:1 ration complete all as specified and directed. |
| 130 | Taking down copper/aluminium point wiring (light, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 131 | Taking down the existing Exhaust fan/ Ceiling fan of any make or any sweep from its position and refixing in position complete all as specified and as directed. |
| 132 | Taking down carefully existing Geyser including connecting items deposited to MES Store yard and refixing the same with necessary spare part i.e fasterns , nut bolt , washer and new PVC hot and cold connection etc complete in all aspect all as specified and as directed. |
| 133 | Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed. |
| 134 | M&L for point wiring concealed type with 1.5 sq mm Nominal cross sectional area, single core, 1100 Volt grade, multi stranded, PVC insulated, unsheathed FRLS copper conductor cable, ISI marked and connected to common earth and earth dollywith suitable copper lugs and drawing into and including rigid non-metallic PVC Concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular metal flush box,modular white cover plate with frame, blanking plate etc suitable for upto required module etc complete and making good disturbed surfaces to match theexisting for one light / bell / fan point controlled by one, one way switch 06 Amp, complete all as specified and as directed. Make- Polycab/Finolex/Gloster. |
| 135 | All as per item No. 134.00 here in before but for one fan point (ceiling / Ventillation) controlled by one 5 amp one way switch complete all as specified and as directed. |
| 136 | All as per item No. 134.00 here in before but for one three pin, 5 Amp, socket out let on independent board complete all as specified and as directed. |
| 137 | All as per item No. 134.00 here in before but for one three pin, 5 Amp, socket out let on same board complete all as specified and as directed. |
| 138 | All as per item No. 134.00 here in before but point wiring with 1.5 Sqmm, multistranded, copper conductor cable, for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specified and directed. |
| 139 | All as per item No. 134.00 here in before but one light point controlled by 2 way switch,with cables 1.5 sq mm size complete all as specified and as directed. Make- Polycab/Gloster/Finolex. |
| 140 | All as per item No. 134.00 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor complete all as specified and as directed. Make- Polycab/Gloster/Finolex. |
| 141 | All as per item No. 134.00 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for AC point and Geyser point on independent board with 4 Sqmm size earth conductor complete all as specified and as directed. Make- Polycab/Gloster/Finolex. |
| 142 | S&F modular type MCB Protected DBOXx AC Box complete in all aspect with Plug Top and one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed. Make:-Legrand/Polycab/ Anchor. |
| 143 | Supply and Fixing of BEE five star rated Electric water heater (Geyser) white blue in colour capacity 25 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type fabricated with shock resistance ABS outerbody ,incoloy glass coated heating element of 2 KW, inner shell made up of stainless steel , automatic cutoff,manual tempreture setting , suitabel to withstand 8 bar pressue including electrical and water connection with hot and cold water connection pipe (PVC type) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete with minimum two year warranty complete all as specified and directed.Make: Khaitan/USHA/CG. |
| 144 | S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete all as specified and as directed. Make:-Legrand/Crabtree/ Anchor roma. |
| 145 | S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, ISI marked complete all as specified and as directed. Make:-Legrand/Crabtree/ Anchor roma. |
| 146 | S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module ISI markedcomplete all as specified and as directed. Make:-Legrand/Crabtree/ Anchor roma. |
| 147 | S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, ISI marked complete all as specified and as directed. Make:-Legrand/Crabtree/ Anchor roma. |
| 148 | S&F in replacement Modular Bell push 6A 1 module complete all as specified and directed. Make:-Legrand/Crabtree/ Anchor roma. |
| 149 | S&F in replacement Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed. Make:-Legrand/Crabtree/ Anchor roma. |
| 150 | S&F in replacement modular switch, 2 way, 6 Amp, 1 Module, complete all as specified and as directed. Make:-Legrand/Crabtree/ Anchor roma. |
| 151 | S&F modular blanking plate, 1 Module complete all as specified and as directed. |
| 152 | M&L for sub main wiring with 4 runs of 10 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade, ISI marked with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 25 mm medium grade as per ISS and two run of 10 sqmm size earth wire PVC insulated copper conductor complete all as specified and directed. (Note:- Four runs of 10 sqmm copper FRLS cable & two run of 10 sqmm copper cable in and including 25 mm PVC conduit medium grade will be measured as one unit. Make : Finloex/Gloster/Polycab |
| 153 | M&L for sub main wiring with 2 runs of 6 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 20 mm medium grade as per ISS and one run of 6 sqmm size earth wire PVC insulated copper conductor complete all as specified and directed. (Note Two runs of 6 sqmm copper FRLS cable & one run of 6 sqmm copper cable in and including 20 mm PVC conduit medium grade will be measured as one unit. Make : Finloex/Gloster/Polycab |
| 154 | S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed. Make:-Legrand/Crabtree/ Anchor roma. |
| 155 | S&F in replacement Bulb holder, PVC/ polycarbonate, isolated body type , 240 volt, fixed in position & connecting complete all as specified and as directed. Make:-Legrand/Havells/ Anchor roma. |
| 156 | S&F in replacement Bldg security light fitting LED 25 Watt, highly efficient IP66 LED, high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution with beam angle of 120 degree used to enhance the luman output Height with Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 4 KV lumen Efficiency should ≥ 100 lumen/ watt in Cool day Light(5700K), Power factor>0.9, CRI (Ra) >70, System with Average life of 50000 Burning hours completewith electric connection with suitable size of PVC insulated copper wire including GI bracket 1.5 Mtr light grade 32 mm dia with clamps and bolts complete all as specified and directed.Make : Jaquar / Osram/ Phillips |
| 157 | Supplying, installation, testing & Commissioning of LED Post top 30 watt , IP65 elegantly designed spun aluminium and high grade aluminium , heat sink for efficient thermal managment , pole mounted posttop 30W with MS base provided to support the housing Power coated black treatment complete all as specified and directed. Make model no :-Jaquar / Osram/ Phillips |
| 158 | Supply, fixing and connecting in replacement recessed mounting Ultra slim Round LED Down light 12 watt designed white colour,with excellent thermally managed aluminum pressure die cast housing with heat - dissipating fins for large surface area finished in epoxy powder coated , deliver high efficacy light complete with all accessories all as specified and as directed. Make : ORIENT / Havells/ Philips. |
| 159 | Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV lumen Efficiency should ≥ 100 lumen/ watt in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. Make : Jaquar / Osram/ Phillips |
| 160 | Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . lumen Efficiency should ≥ 100 lumen/ watt in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.Make : Jaquar / Osram/ Phillips |
| 161 | S & F Heavy Duty Metallic Ventillation Exhaust Fan 300 mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. Make:-Polycab/Bajaj / CG |
| 162 | Supply & fixing of BLDC ceiling fan complete with blades, down rods and accessories , Min air delivery 210 CFM with service value 6.00 BEE , 5 star rating (White colour) 230 V, 1200 mm sweep, speed 340 RPM , having rod length 300 mm complete all as specified and directed by Enggr in charge. Make- Polycab/ Bajaj / USHA. Old unsv Fan shall be deposited to MES store yard. |
| 163 | S&F in replacement modular Fan regulator suitable for BLDC fan, 120W - 2 module complete all as specified and as directed. |
| 164 | Supply and Installation, testing , commissioning Wall Mounted Indoor type main distribution panel made out of 2.00 mm thick CRCA sheet , suitable for 415 Volt, 3 Phase, 50Hz supply with front openable double door with provision of locking arrangement dust and vermin proof, gasket, Aluminium 400 Amp TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly powder coated ( by 7-tank process) complete all as specified and as directed.1. INCOMMERMCCB, 4 Pole , 25 KA , 250 Amp -01 No2. OUTGOINGMCCB, 4 Pole , 16 KA , 125 Amp - 04 NosMAKE OF MCCB & BUSBAR :- L&T / Legrand / ABB |
| 165 | S&F in repair IP 43 protected load line distribution board, double door type (metal) , Vertical TPN 4 way, suitable for surface mounting with provision of incomer frame suitable for four pole MCCB upto 160 Amps and SP/TP MCB as outgoing, including fully insulated 250 Amp copper bus bar for each phase, two neutral bar , two earth bar and cable ties for cable mangement, blanking plates etc complete all as specified and as directed. Note:- MCCB& MCB shall be measured & paid separately under respective item of schedule.Make : Legrand /ABB / L&T |
| 166 | M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mm bore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed. |
| 167 | S & F in replacement for distribution board double door type, SPN, 8 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.Make-Legrend/ Siemens/ ABB |
| 168 | S & F in replacement for distribution board double door type, SPN, 12 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.Make-Legrend/ L&T/ ABB |
| 169 | S & F in replacement MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed. Make -Legrend / ABB / L&T |
| 170 | S & F in replacement MCB SPN, 240 Volts, 63 Amps complete all as specified and directed. Make-Legrend / ABB / L&T |
| 171 | S & F in replacement MCB SP, 240 Volts, 10 Amps complete all as specified and directed. Make-Legrend / ABB / L&T |
| 172 | S & F in replacement MCB SP, 240 Volts, 16 Amps complete all as specified and directed. Make-Legrend / ABB / L&T |
| 173 | S & F in replacement MCB SP, 240 Volts, 25 Amps complete all as specified and directed. Make-Legrend / L&T / ABB |
| 174 | S & F in replacement MCB SP, 240 Volts, 63 Amps complete all as specified and directed. Make-Legrend / L&T / ABB Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender