Tender For special Repair To Bldg No. P-13/Eme (Single Men Living Barrack) Along With 02 X Washrooms At Ground Floor Of 639 Eme Bn At Pal Ur Mil Stn.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Oct 2026
4 days left
EMD
71600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No. P-13/Eme (Single Men Living Barrack) Along With 02 X Washrooms At Ground Floor Of 639 Eme Bn At Pal Ur Mil Stn.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as complete all as specified and directed. |
| 2 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawings complete all as specified and directed. |
| 3 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the cement all as welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed. |
| 4 | S&F butt hinges 100mm cold rolled medium weight mild steel complete all as specified and directed. |
| 5 | S&F 125mm size, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 6 | S&F 150mm long aluminium tower bolts (ISI Marked) extruded type complete all as specified and directed. |
| 7 | S&F Powder coated aluminium (minimum thickness of powder coating 50 microns) work for partitions with slider frame of two numbers, allowing parallel tracks within the sliding frame with extruded up standard tubular sections / appropriate Z sections and other sections of approved make, fixing with fasteners of required dia and size, including necessary filling up the gaps at top, bottom and sides with required EPDM rubber/ required including cleats angle. Aluminium snap beading for glazing/panelling, CP brass/ stainless steels, screws, complete all as specified and directed. |
| 8 | S&F for shutter of aluminium extruded sections weighing not less than 0.55 kg per RM, comprising outer frame and intermediate member as required. The shutter shall be infilled with 3 mm thick ACP (Aluminium Composite Panel) sheet of approved shade and make, fixed with suitable beading, screws and accessories incl handles, locks, stoppers, all fittings and fixtures, cutting, fabrication, assembly and installation complete in all respects complete all as specified and directed. |
| 9 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, gazed with putty or fixed with beads complete all as specified and directed. |
| 10 | S&F in repairs Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 11 | Demolition of brick work or stone /boulder masonry, built in CM, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc and M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6) complete all as specified and directed. |
| 12 | M&L Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement including Taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water complete all as specified and directed. |
| 13 | M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour complete as per manufacturers specification two or more coats over 2mm wall care putty on new surface of wall including preparation of surfaces with complete all as specified and directed. |
| 14 | M & L for 15mm thick Rendering in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement including Taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water complete all as specified and directed.Note :- Water proofing liquid compound shall be measured and paid separately. |
| 15 | M&L for applying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces of wall including preparation of surfaces of walls complete all as specified and directed. |
| 16 | M&L for complete removal of existing treatment and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour complete as per manufacturers specification two or more coats over 2mm wall care putty on old surface of wall including preparation of surfaces with complete all as specified and directed. |
| 17 | M&L for complete removal of existing treatment & appplying two or more coats as required of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces of wall complete including preparation of walls by complete all as specified and directed. |
| 18 | M&L for 20mm thick granite (any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Demolition of stone slabs and tiles of any description or thickness in floor, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 19 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness. (below or above ground level) complete all as specified and directed. |
| 20 | ML 75mm thick for Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 21 | S&F Providing and fixing tiled false ceiling of size 595 x 595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanised steel section (galvanized @ 120 gsm/sqm, both side inclusive) consisting of 3600mm long main 'T' runner size 24x38mm and 0.30mm thick, 1200mm long cross 'T' of size 24 x 25mm and 0.30mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main 'T' runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasteners, 4mm GI adjustable rods with galvanised buttfly level clips of size 85x30x0.8mm spaced at max 1200mm centre to centre along main 'T' and not more than 150mm from spliced joints.The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall, then 1200mm long cross 'T' is interlocked between the main 'T' at 600mm center to center to form a grid of 1200x600mm and then secondary cross 'T' of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally white coloured Gyproc 8mm thick Dew Drop/Granular tiles of size 595x595mm having foil on backside & PVC paper on front side wrapped around edges to be placedin grid complete all as specified and directed, including dismantling of existing false ceiling of any description of any description complete all as specified and directed. |
| 22 | Dismantling floor tiling incl cement mortar bedding (not backing) removing servicable tiles to a store and rubbish off premises and M&L for non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick in CM 1:6 complete all as specified and directed. |
| 23 | Dismantling of wall tiling incl cement mortar bedding (not backing) removing servicable tiles to a store and rubbish off premises and M&L for Glazed ceramic coloured tiles(match as floor tiles) of size 450 x 350 x 7mm thick, on vertical surfaces of walls set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 24 | Taking up or down 15mm bore dia steel water tubing and connection, including cleaning for refixing or removal to store and S&F for steel water tubing, 15mm bore dia, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc complete all as specified and directed. |
| 25 | Taking up or down 20mm bore dia steel water tubing and connection, including cleaning for refixing or removal to store and S&F for Steel water tubing, 20mm bore dia, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc complete all as specified and directed. |
| 26 | S&F in repairs 20mm dia gun metal ,globe or gate valves, with iron wheel head, screwed both ends for iron pipe each and fixed, complete all as specified and directed. |
| 27 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern) EWC white connected to drain or out going pipe and flushing pipe complete including PVC sheet cover closed recessed type with flat bottom, and cover with mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 28 | S&F in repairs vitreous china wash down water closet pan (Orissa pattern) white with integral foot rest of size 580x440mm white (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe and including 'P' & 'S' trap complete incl making good to floor complete all as specified and directed. |
| 29 | S&F in repairs of pvc 10 ltr valve less,symphonic action type, flushing cistern, low level,white inlet, ball valve, float and handle including bracket and & supply of flush pipe of polyethylene of low or high density or PVC, 32 mm dia for low level cistern & supply of plastic water closet seat cover white , closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 30 | S&F in repairs Oval (colour as directed) under counter type wash basin of size 560 x 470 x205mm incl CP Each coupling and waste pipe complete all as specified and directed. |
| 31 | S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre Each long flexible tube and ABS wall hook including making connections and fixed in pipe. complete all as specified and directed. |
| 32 | S&F CP jet spray hygienic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed. |
| 33 | S & F in repairs 1500mmx600mm bevelled edge looking mirror frameless body of selected quality with 4.5mm thick Each polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers. ,complete all as specified and directed. |
| 34 | S&F in repair vitreous china Urinal half stall type white with CP spreader etc complete including making good complete all as specified and directed. |
| 35 | S&F in repair 15mm bore Angle valves, CP fancy type, (ISI marked) two way screwed down, high pressure with Each crutch or butterfly handle, screwed both ends (externally threaded) complete all as specified and directed. |
| 36 | S&F in repair 15mm concealed type with wall flange, stop valves, cast copper alloy, fancy type cromium plated Each screwed down, high pressure, with canutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 37 | S&F in repair CP Swan Neck Pillar taps fancy type 15 mm bore cast alloy with capasten head screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly-nuts screwed (as approved by GE), complete all as spfid and directed |
| 38 | S&F in repair bib taps 15mm bore, fancy type cromium plated with butterfly handle, screwed down, high pressure, with canutch or butterfly handle, screwed both ends for iron pipe or for unions.including wall flange complete all as specified and directed. |
| 39 | S&F in repair Brass chromium plated mixture for mixing hot and cold water for Bath/WHB, screwed down for iron pipe for 15mm dia bore pipe, complete all as specified and directed. |
| 40 | S&F in repairs Chromium plated toilet paper holder premium quality complete all as specified and directed. |
| 41 | S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 42 | S&F in repair brass chromium plated shower rose not less than 125 mm size with swivel joints including fixing to Each steel pipe or union complete all as specified and directed. |
| 43 | S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 44 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed. |
| 45 | S&F in repair PVC connections 15mm., 450mm long with PTMT nuts washers etc complete all as specified and directed. |
| 46 | S&F in repair waste pipe of polyethylene of low or high density of PVC, 32 mm dia, complete all as specified and directed. |
| 47 | S&F in repairs 1000Ltr capacity Rotational moulded polyethylene water storage tank (Cylindrical vertical with Each closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank complete all as specified and directed. |
| 48 | S&F PVC (SWR) pipes 75 mm bore dia, single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches etc including Dismantling of CI/PVC pipe 75/100mm bore fixed to wall or laid in floor or trenches incuding connection complete all as specified and directed. |
| 49 | S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints fixed to walls/ laid in trenches etc including Dismantling of CI/PVC pipe 75/100mm bore fixed to wall or laid in floor or trenches incuding connection complete all as specified and directed. |
| 50 | S & F 75 mm bore PVC Bends (SWR) complete all as specified and directed. |
| 51 | S & F 75 mm bore PVC (SWR) T-Junction with ovel acces door complete all as specified and directed. |
| 52 | S & F 110 mm bore PVC Bends (SWR) complete all as specified and directed. |
| 53 | S & F 110 mm bore PVC (SWR) T-Double Junction with oval access door complete all as specified and directed. |
| 54 | S&F CP grating 125mm complete all as specified and directed. |
| 55 | S & F PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement complete all as specified and directed. |
| 56 | S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed. |
| 57 | Supply only liquid water proofing liquid complete all as specified and directed. |
| 58 | S&F in repairs 25mm curtain rod Stainless Steel fancy/ designer pattern incl brackets Complete all as specified and directed. |
| 59 | M&L for preparation of old steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 60 | M & L Machine cut kota stone slab flooring 20-25 mm thick over laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) incl repair in patches, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl Demolition complete all as specified and directed. |
| 61 | S&F for 2mm thick fibre glass reinforced plastic translucent plain Sheet side fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 62 | Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. |
| 63 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. |
| 64 | Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. |
| 65 | M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continuous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC concealed / surface casing 'N' capping double lock type to be fixed with the help of rawl plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including Polycarbonate/ Modular GI sheet flush boxes of anyway (as per site requirement) and modular white cover plate with frame for mounting switches, sockets, regulators etc for fixing one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing whitewash color complete all as specified and directed.. Notes : (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof/ceiling PVC casing 'N' cappingshall be provided on surface with proper fixing clamps complete all as specified and directed. |
| 66 | Description all as per serial item No 65 Above but one 5 pin socket outlet, 5 amps on the same board complete all as specified and directed. |
| 67 | Description all as per serial item No 65 above but one 5 pin socket outlet, 5 amps. independent complete all as specified and directed. |
| 68 | Description all as per serial item No 65 above but for one 5 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed. Note :-Power circuit shall be done in separate circuit. |
| 69 | S&F in replacement ceiling rose, 3 terminal surface type complete all as specified and directed |
| 70 | S&F in replacement angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed |
| 71 | S&F in replacement Modular switch 1 way 6 A,1 module, 240 volts ISI marked complete all as specified and directed. |
| 72 | S&F in replacement Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed. |
| 73 | S&F in replacement Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. |
| 74 | S&F in replacement Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. |
| 75 | S&F Modular white cover plate 8M complete all as specified and directed. |
| 76 | S&F Modular white cover plate 6M complete all as specified and directed. |
| 77 | S&F Modular white cover plate 3M complete all as specified and directed. |
| 78 | S&F Modular white cover plate 1M complete all as specified and directed. |
| 79 | S&F Modular Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed. |
| 80 | Supply and fixing LED complete fitting including batten LED polycarbonate 1 x 20 Watt tuberod , appx 4 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed. |
| 81 | Supply and fixing LED complete fitting including batten LED polycarbonate 1 x 10 Watt tuberod , appx 1 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed. |
| 82 | S&F sheetmetal enclosure double door distribution board factory made for MCCB DB load link VTPN 8 way suitable for MCCB as incomer 250 Each Amp 4 pole and (where MCB are to be used) complete with suitable size of bus bar complete fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces tomatch with existing specification including taking down old DB complete all as specified and directed. |
| 83 | Supply and fixing in replacement of MCCB 250 Amp rating,4-pole 415V, 50 Hz breaking capacity 36 KA, Adjustable & fixed magnetic setting type. Each complete all as specified and directed. |
| 84 | S & F of 415V 10KA 'C' curve TP 63 Amp miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 85 | S&F distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed Note:- Distribution board and MCB's should be same make. |
| 86 | S & F of 415V 10KA 'C' curve TPN 63 Amp miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 87 | S&F in replacement 240V, 10KA C curve miniature circuit breaker of single pole and carrying capacity 6 to 40 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed |
| 88 | S & F of SPN 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed |
| 89 | M&L for sub main wiring with proper colour coding, insulated, multistranded, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth alongwith PVC conduit will be measured and paid as one unit length complete all as specified and directed : Note : Wiring shall be done in proper colour coding. Note: Cutting chases on the wall whereever required is deemed to be included in unit rate quoted. |
| 90 | Supply and fixing Recess mounted slimLED luminaires with drop diffuser light of size 2ft x2ft ,36 watt ,230 volts Ac corrosion resistant complete all as specified and directed. |
| 91 | Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI earth strip of size 32x6mm means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and directed as all as shown in electrical plate No 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed byGE. (Note: GI strip & GI pipe beyond 7.5Mtr length from earth electrode shall be measured and paid separately). |
| 92 | Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI Wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and directed as all as shown in electrical plate No 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed by GE. (Note: GI strip & GI pipe beyond 7.5Mtr length from earth electrode shall be measured and paid separately). |
| 93 | Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed. |
| 94 | Supply, fixing & testing 60W LED street light fitting IP66 Powder coated pressure die cast aluminium High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewired and suitable fixing arrangement for mounting on MS frame bracket including connecting the fitting complete all as specified and directed including taking down |
| 95 | S&F Single pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole MCB, 20 Amp, 240 volts ISI marked complete all as specified and directed. |
| 96 | Disconnecting/ Taking down Ceiling Fan of any sweep and deposit to safe custody and refixing the same making connection and testing complete all as specified and directed. |
| 97 | Disconnecting water heater and taking in safe custody/ refixing the same including the connection and testing complete all as specified and directed. |
| 98 | Disconnecting/ Taking down Exhaust fan of any sweep and deposit to safe custody and refixing the same making connection and testing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender