Tender For Repair & Resurfacing Of Road & Road Furnitue Incl Road Marking Paint At Various Locations Of Mcmm, Signal Records & Depot Regt Under Ge (East) Jabalpur
Tender Value
80 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
27 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Resurfacing Of Road & Road Furnitue Incl Road Marking Paint At Various Locations Of Mcmm, Signal Records & Depot Regt Under Ge (East) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and n exc 50 mm deep complete all as specified and as directed. |
| 2 | Preparing existing black top surface by brushing with wire brushes for removing caked mud etc.blowing with mechanical blower to remove all loose dirt etc.from surface complete all as specified and as directed. |
| 3 | M&L for applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 10 Kg/ 10Sqm by using mechanical sprayer on black top surface of road complete all as specified. |
| 4 | M&L for applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 5 Kg/ 10Sqm by using mechanical sprayer on black top surface of road complete all as specified. |
| 5 | M&L for premixed bituminous macadam for consolidated thickness upto 75 mm or less with using 19mm graded (Grading 2) stone aggregate with minimum 4.0% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed.Notes:- (i) Premixed bituminous macadam shall be prepared in hot mix plant only.(ii) Premixed bituminous macadam shall be laid with sensor paver only.(iii) Binder content shall be tested at site as directed by Engr-in-Charge. |
| 6 | M&L for bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness with minimum 5.50 % binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed.Notes:- (i) Bituminous premixed asphaltic semi dense concrete shall be prepared in hot mix plant only.(ii) Bituminous premixed asphaltic semi dense concrete shall be laid with sensor paver only.(iii) Binder content shall be tested at site as directed by Engr-in-Charge. |
| 7 | M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stops liines, dashes, arrows etc and the like n exc 10 cm wide on roads pavements with hot applied thermoplastic road marking paind of approved colour confirming to BS-3262-1989 with special applicator machine all as per maufacturers instruction complete all as specified and directed. Make of Road Marker Paint/ Compound:- Asian or Thermoline as approved by GE.Notes:- (i) MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by GE.(ii) Shape, size & pattern of marking shall be as approved by GE. |
| 8 | S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 9 | S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 10 | S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed |
| 11 | M&L for 100mm thick moorum/ red bajri, spread , rolled and consolidated to gradient and camber as required complete all specified and directed. Note:- (i) Compacted thickness shall be measured and paid.(ii) Rolling/ compaction shall be done by vibromax roller only. |
| 12 | Demolition of cement concrete (un reinforced) in ground floor and pavings n.exc 15cm thickness (below or above GL) complete all as specified and directed. |
| 13 | Material and labour for pre-cast cement concrete type B1 1:2:4 (20mm graded aggregate) as in kerb stone (factory made) on road and path including exavating in line n.exc 20cm in width and 30cm deep with 50mm thick PCC 1:4:8 in sub base of exavated area lay/fix the curve stone over PCC and packing the same duly retuning filling and pointing the gaps between curve stones with grey cement complete all as specified and as directed |
| 14 | M&L prepratio of new cocrete surface of any description over 10 cm grith or width applying two coats of plastic emulsion paint over a coat of priming paint plaster complete all as specified and directed. |
| 15 | M&L for prepration of old painted cocrete surface of any description over 10 cm grith or width applying one coats of plastic emulsion paint,complete all as specified and directed. |
| 16 | M&L PCC (1:2:4) type B-1 (20mm graded aggregate) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed. |
| 17 | Schedule of credit amount of Rs 17930.00 to be deducted during AOC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender