Tender For Smart External Periodical Services At Lower, Middle And Upper Shankar Vihar Under Age B&R-Ii Ge (South) Delhi Cantt-10
Tender Value
80 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
21 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smart External Periodical Services At Lower, Middle And Upper Shankar Vihar Under Age B&R-Ii Ge (South) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M&L for 15 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth including taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 2 | M&L for 10 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth including taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 3 | M&L for 5 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth including taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 4 | Preparation of the newly plastered surfaces of walls/ ceiling and M&L applying two coats of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6 sqm/ltr with Graco spray machine over one coat of primer with and including 1mm thick wall care putty to prepare the surface even and smooth complete all as specified and directed by Engineer-in-charge |
| 5 | Preparation of the newly/old plastered surfaces of walls/ ceiling and M&L for applying two coats of distemper oil emulsion, with Graco spray machine on wall surface white or tinted overfor one coat of wall putty avg 1-1.5 mm thick prepared putty base surface complete all as specified and directed by Engineer-in-charge. |
| 6 | Complete removal of existing loose treatment by scraping with mechanical wall/ceiling by vacuum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inch/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller complete all as specified and directed |
| 7 | M&L for one coat of wall putty avg 1-1.5 mm thick suitable for external surafce complete all as specified and directed. |
| 8 | M&L Applying two coats with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work |
| 9 | M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and directed by engineer-in-charge. |
| 10 | M & L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint all as specified and directed |
| 11 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or grith and applying one coat of aluminum paint, complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for demolition of concrete dropping / side of roof slab N exc 0.5 m width including making good the surafce by dubbing out 20mm thick on irregular surface , plastering with Readymix cement plaster 10 mm thick finished even and fair including cutting channel groove in ceiling / roof projection finishing it with Water proofing compound complete all as specified and directed. |
| 13 | M&L for preparing of old painted surface CI pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and apply one coats of black Japan paint all as specified and complete |
| 14 | Hacking out old broken glass n.exc 1.50 Sq.m(any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, all as specified. |
| 15 | S&F, Sheet glass 4 mm thick , ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pan complete all as specified and directed . |
| 16 | S&F PVC handrail cover of width 50/65 mm and as specified in IS 12867 (1989) complete all as specified and directed |
| 17 | M&L for 50mm thick (Average) guniting in patches on to the required area on RCC parapets, walls, columns, beams, stairs, lintels, sunshades, roofing slab etc. of all sizes and shapes at all heights from existing ground floor and all locations with cement and sand mortar 1:3 (1 Cement : 3 Sand) under 2 to 2.8 Kg/Cm2 pressure, after removing the damaged loose spalt concrete portions by chipping, removal of dust and applying one coat of rust convertor kp-100 or equivalent grade over reinforcement wherever necessary, providing and tying in position with 75mm x 75mm square size with 2.946 mm dia mild steel wire welded mesh over treated surface, ready to receive grouts, curing for 10 days etc. including labour charges, hiring charges for all tools and plants, machineries, cost of consumables, scaffolding, all types of protective equipment, plant floors, pipelines, vessels, materials etc. complete all as specified and as directed. |
| 18 | M&L for 15 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth without using extra cement mixed with by adding permeability reducing polymer @ 250gm/sqm (6%) by weight of cementitious content at time of mixing with water as per manufacturer's recommendations including all levelling the surface, curing etc complete. NOTE : Rates for water proofing compound/ polymer deemed to be included in the above rates. |
| 19 | M &L for providing and applying a bond coat of Latex:Water:cement - 1:4:6 consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete. |
| 20 | Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. Drilling Holes : Drilling holes 10mm diameter in masonary structure along the side of the joint as per manufacturer's instructions so as to cross the brick/ block at the intervals spacing of 15-30cm depending on extent of rising dampness as per recommendation of engineer in charge.Cleaning of holes : Clean the holes by air blower prior to fixing nozzles. Install latex polymer packer injection packers 9.8mm diameter, 10cm long in the holes and tighten. Fix the packer securely using sealent.Cutting of Packers : Cut the packers after completion of grouting without damaging structural elements. |
| 21 | Supply and apply of a 3 part, very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time having Mixed viscosity : 3-11 M.pa.s at +20 Deg C, Reaction time : adjustable according to ambient temperatrure and execution requirement between 8-50 mins, pH – 9-10, tested as per Wissbau No. 2002-094-(1A) – Function test with re-injectible hose system. The holes should be drilled until a depth of approx 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump injcection of polymer resin compound at >20 bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas. If voids in masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout. When movement stops or polymer compound appears at the packer move to the next packer and inject. If the dampness is heavy, inject similarly at next joint line. |
| 22 | M & L for Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate on chajjas Nexc 1.5 Sqm to rounded or chamfered to provide concave slope , including providing a 5 mm layer with CM 1:3 adding waterproofing chemical as per manufacturer instruction and top layer of 1-1.5mm thick water proof putty and water proof paint including necessary form work complete all as specified and as directed.Note : Cost of above deemed to be included in above quaoted. |
| 23 | S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed |
| 24 | Taking down eaves gutter rain water pipe (any size of pattern) including all fittings, heads, shoes, bends, swan-necks and cleaning or fixing or removal, complete all as specified and as directed |
| 25 | Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps complete all as specified and as directed |
| 26 | S&F in repairs for PVC (SWR) bends/Tees of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed |
| 27 | Supply and Fixing 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps complete all as specified and as directed |
| 28 | S&F in repairs for PVC (SWR) bends/Tee etc of radius, suitable for 75 mm dia PVC pipes fixed complete all as specified and as directed |
| 29 | Cutting of vegitation , sapling and bushes(girth n.exc. 300mm) from roof,terrrace,chajjas ,wall etc.digging out the root and making good the surfaces in PCC (1:2:4) type B1 with surfaces finished to match including scaffolding uoto three story storey complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender