Tender For Repair/ Replacement Of Concertina Coil, Barbed Wire And Chain Link Fencing At Af Stn Under Ge (Af) Jamnagar No. 1
Tender Value
40 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Concertina Coil, Barbed Wire And Chain Link Fencing At Af Stn Under Ge (Af) Jamnagar No. 1
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/ boulder masonry / PCC block masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete article, etc., including removal of debris outside MOD land, complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material & Labour for pre-cast cement concrete block masonry type C-1,1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & Labour for Complete removal/Taking down cement plaster/cement lime mortar on brick/stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., including removal of debris outside of defence land, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for rendering 15mm thick on fair faces of brick work or concrete surface of wall in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces (exterior weather coat) paint in normal/camouflage pattern as directed by Engr-in-Charge of any tint as approved over one coat of primer, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Supply & Fixing in repair Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, boundary wall and straight flashings (length and girth as fixed) of thickness n less than 0.80mm with grade of zinc coating 275, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Excavation in post holes in soft and loose soil not exceeding 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm watering and removing surplus materials to a distance not exc 50m and making good surface, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material & Labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material & Labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply & Fixing in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing’s and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply & Fixing in repairs galvanized concertina coil of 1060mm dia made of 0.5mm thick, 19mm wide strip & 2.59 mm dia high tensile wire, 125 Nos of clips, having 56 Nos of circles and covering 8 to 10 running mtr and 'S' clips per spiral using a central core of high tensile wire around which a tape of razor sharp barbs is machine crimped etc., complete all as specified and directed by Engineer-in-Charge. |
| 12 | Taking down chain link fencing of any mesh size/any type including link wire to any type of standard rails/ supports etc., & straining bolt etc., including binding wire, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply only chain link MS galvanised fencing conforming to IS 2721:2003 including line wires of 4mm dia straining bolts etc., including provn of binding wire, complete all as specified and directed by Engineer-in-Charge. |
| 14 | Fixing only chain link fencing of any mesh size/any type including link wire to any type of standard rails/ supports etc., & straining bolt etc., including provision of binding wire, complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material & Labour for mild steel round bar 10mm and over as in tightening of chain link fencing including cutting to shape, necessary drilling, bolting etc Fe-410-W (Gde E-250) quality -A or Fe 290 (Gde-E-165), complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material & Labour for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply & Fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 cm long, Diameter of neck in 16 to 20mm, etc., complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & Labour for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material & Labour for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 21 | Demolition of un-reinforced concrete in ground floors, and paving not exceeding 15cm thickness (below or above ground level) including removal of debris to out of MoD land, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material & Labour for 100mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and paving’s etc., complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material & Labour for sand cushioning 25mm thick over concrete surfaces, spread, complete all as specified and directed by Engineer-in-Charge. |
| 24 | Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness, with minimum compressive strength of 35N/sqm (M-35), without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with grey cement and no pigment laid, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender