Tender For Special Repairs To Floor Tiling In Verandahs & Staircase Area Up To 4Th Feet Height In Building No. P-194 (Kesari And Yamuna Blocks)(15+6 Class Rooms) And Refurbishment Of Washrooms At Nausena Baugh Under Ge [Nb], Visakhapatnam
Tender Value
1.40 Crore
Estimated cost
Bid Submission
20 Oct 2026
16 days left
EMD
2.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Floor Tiling In Verandahs & Staircase Area Up To 4Th Feet Height In Building No. P-194 (Kesari And Yamuna Blocks)(15+6 Class Rooms) And Refurbishment Of Washrooms At Nausena Baugh Under Ge [Nb], Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing with neat cement slurry with 3.0 Kg of cement per Sqm area, rendering 10mm thick in cement mortar 1:4 duly mixed with and including water proofing compound on concrete surfaces finished even and smooth without using extra cement and laying hyperlas standard Polymeric water proofing membrane of weight not less than 3.00 Kg per Sqm incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bituminous primer @ 100gms/sqm followed by a coat of blown bitumen of grade 85/25 or 90/15 @ 1.2Kg/Sqm each at top and bottom of the membrane and finished with a coat of bituminous aluminium paint @ 100 grams per Sq.m on top for water proofing treatment including sealing all joints by thermo fusion with minimum 10 cm overlap all as per manufacturer's instructions including taking down existing Roof Treatment of any description and removing rubbish off the premises complete all as specified and as directed.Note: The rate quoted shall be deemed to include Water proofing compound. Nothing shall be paid extra on this account. |
| 2 | M & L for 25 mm thick PCC 1:2:4, Type B-1, using 12.5mm graded aggregate mixed with WPC as per manufacturers instructions and laid on RCC slab to make surface level for proper slope finished even & fair all as specified and as directed. (Note:-The rate quoted shall be deemed to include Water proofing compound. Nothing shall be paid extra on this account.) |
| 3 | Demolition of Unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] and removing rubbish off the premises complete all as specified and as directed. |
| 4 | Demolition of Unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish off the primises complete all as specified and as directed. |
| 5 | M & L for 25 mm thick PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in levelling course / sub base for flooring, complete all as specified and as directed. |
| 6 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick light shade (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.Notes: The colour/ shade/ design of tiles shall be as approved by GE. |
| 7 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surfaces as in skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.Notes: The colour/ shade/ design of tiles shall be as approved by GE. |
| 8 | Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish off the premises complete all as specified and as directed. |
| 9 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 10 | M & L for coloured Glazed ceramic tiles of size 450x350x7mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:3 including dismantling existing tiles complete all as specified and directed. [Note: Rate quoted is deemed to include for cutting for offsets etc] |
| 11 | M & L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation, sunken floor filling and mass concrete including demolition of old concrete complete all as specified. |
| 12 | M & L for rendering 15mm thick in CM 1:3 on concrete surfaces mixed with and including water proofing compound finished even and smooth with out using extra cement as in sunken portions complete all as specified and directed. |
| 13 | M & L for applying Chemical Injection Treatment in the form of Pressure Grouting by drilling 20 mm dia holes, 60 mm deep @ 100 cm grid at bottom floor and all the internal wall surfaces of the sunken slabs of toilet by injecting Cement Slurry mixed with Grout Admixture \\"CONBEXTRA EP 10\\" of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Batik India Pvt. Ltd. at 225 Grams for 50 KG of cement and applying a coat of Brush Bond RFX of M/s. Fosroc Chemicals or equivalent approved water proofing coating as per manufacturer's instructions complete all as required and as directed at site. |
| 14 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100M and disposal of unserviceable materials ,debris and rubbish outside MD land complete all as specified and as directed. |
| 15 | Use and removal of steel formwork to sides and soffits of floor or roof beams, beam launchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, splays between floors and beams and similar works for fair finished surfaces of concrete complete all as specified and as directed. |
| 16 | M & L for RCC 1:1½:3, Type A-1, using 20mm graded stone aggregate for shelves and the like etc complete all as specified and as directed. |
| 17 | M & L for RCC 1:1½:3, Type A-1, using 20mm graded stone aggregate for chajjas and the like etc complete all as specified and as directed. |
| 18 | M & L for RCC 1:1½:3, Type A-1, using 20mm graded stone aggregate as in fins fascias louvres,parapets,and railing exc. 60 cm in height,newels, balustrade and the like complete all as specified and as directed. |
| 19 | Use and removal of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed. |
| 20 | M & L for RCC 1:2:4, Type B-1, using 20mm graded stone aggregate for slabs suspended on walls,beams and coumns, in floor,roofs,landings and in shelves and the like etc complete all as specified and as directed. |
| 21 | Use and removal of steel formwork to chajjas including edges, fair finished surfaces complete all as specified and directed. |
| 22 | Use and removal of steel formwork to fins, Facia, louvers including fair finished surfaces complete all as specified and directed. |
| 23 | M & L for High Strength Corrosion Resistant Deformed TMT Bars of 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 24 | M & L for High Strength Corrosion Resistant Deformed TMT Bars of 6mm to 8mm dia, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 25 | M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 using old size bricks including demolition of old brick work complete all as specified and directed. |
| 26 | M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using old size bricks including demolition of old brick work complete all as specified and directed. |
| 27 | Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed. |
| 28 | M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. |
| 29 | M & L for rendering in two layers comprises of 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished with 5mm thick in CM 1:4 duly mixed with and including cement water proofing compound as per manufacturers instructions, finished even and smooth with out using extra cement complete all as specified and directed. |
| 30 | M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces, finished even and smooth with out using extra cement complete all as specified and directed. |
| 31 | Removing plants grown on the surfaces of building with roots of any height and girth and applying chemical treatment to prevent further growth and making good the disturbed surfaces in CM 1:3 to match with existing surfaces complete all as directed |
| 32 | M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directetd. |
| 33 | M & L for complete removal of existing treatment of old surfaces and applying two coats of white wash on ceiling complete all as spcified and directed. |
| 34 | M & L for complete removal of existing treatment of old surfaces and applying two coats of white wash on wall complete all as spcified and directed. |
| 35 | M & L for preparation of newly plastered wall surfaces and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resistant primer over and including suitable thickness wall care putty for making good undulations to obtain smooth surface complete all as specified and directed. |
| 36 | M & L for complete removal of existing treatment on wall surfaces and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resistant primer over and including suitable thickness wall care putty for making good undulations to obtain smooth surface complete all as specified and directed. |
| 37 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint including wooden putty complete all as directed. |
| 38 | M & L for preparation of old surfaces of walls/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm over and including suitable thickness wall care putty for making good undulations to obtain smooth surfacecomplete all as directed |
| 39 | M & L for preparation of newly plastered surfaces of walls/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm over and including suitable thickness wall care putty for making good undulations to obtain smooth surfacecomplete all as directed |
| 40 | M & L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified |
| 41 | S & F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls/ceiling including taking down old CI pipes complete all as specified and directed. |
| 42 | S & F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls/ceiling including taking down old CI pipes complete all as specified and directed. |
| 43 | S & F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in floors including taking down old CI pipes complete all as specified and directed. |
| 44 | S & F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in floors including taking down old CI pipes complete all as specified and directed. |
| 45 | M & L for PVC (SWR) plain floor / Nahani trap of 75 mm dia outlet with Stainless steel (Chrome polished) of grade 304, flat cut floor grating 125 mm x 125 mm with cockroach trap with or without hole as per requirement of site including jointing with solvent cement complete all as specified and directed. |
| 46 | M & L for 75mm bore PVC (SWR) bends any radius with access door complete all as specified. |
| 47 | M & L for 110mm bore PVC (SWR) bends any radius with access door complete all as specified. |
| 48 | M & L for 75mm bore PVC (SWR) bends any radius complete all as specified. |
| 49 | M & L for 110mm bore PVC (SWR) bends any radius complete all as specified. |
| 50 | M & L for 75mm bore PVC (SWR) branch piece single, (Single Y) equal or unequal of any radius complete all as specified. |
| 51 | M & L for 75mm bore PVC (SWR) branch piece single, (Single Y) equal or unequal with access door complete all as specified. |
| 52 | M & L for 110mm bore PVC (SWR) branch piece single, (Single Y) equal or unequal of any radius complete all as specified. |
| 53 | M & L for 110mm bore PVC (SWR) branch piece single, (Single Y) equal or unequal with access door complete all as specified. |
| 54 | M & L for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified. |
| 55 | M & L for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified. |
| 56 | Supplying and fixing of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings concealed in walls / ceiling or laying in floors including taking down old GI tubing of 15mm dia complete all as specified and directed. |
| 57 | Supplying and fixing of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings concealed in walls / ceiling or laying in floors including taking down old GI tubing of 20mm dia complete all as specified and directed. |
| 58 | Supplying and fixing of 40mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings concealed in walls / ceiling or laying in floors including taking down old GI tubing of 25mm/32mm dia complete all as specified and directed. |
| 59 | Supplying and fixing of 50mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings concealed in walls / ceiling or laying in floors including taking down old GI tubing of 40mm/50mm dia complete all as specified and directed. |
| 60 | S & F in repairs 15 mm bore fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. |
| 61 | S & F in repairs Stop Valves/Angle Cocks, 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and as directed. |
| 62 | S & F in repairs Brass Chromium plated shower rose 125mm with or without swivel joints, including fixing to steel pipe or union complete all as directed |
| 63 | S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 50 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed. |
| 64 | S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 MPa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed. |
| 65 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litres capacity, triple layered, hoisted and fixed in position including 20mm dia PTMT ball valve including taking down old tank complete all as specified and directed. |
| 66 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed. |
| 67 | S&F Stainless Steel Soap Dish, wall-mounted type, made of AISI 304 grade stainless steel, minimum plate thickness 1.0 mm, size not less than 125 × 100 mm, corrosion resistant, with concealed screws and wall plugs, including drilling, fixing to wall at required height, making good disturbed surfaces, complete all as specified and directed |
| 68 | S & F in repairs Stainless steel Towel Ring square with round flange complete all as directed. [Make shall be Jaquar of Cat No. ACN-1121N or its equivalent] |
| 69 | S & F in repairs brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as directed |
| 70 | S & F in repairs 600 mm X 450 mm Bevelled Edge Mirror of selected quality glass, 6 mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed. |
| 71 | S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern] of size 560x440x395mm or nearest size, White, including flush pipe of polyethylene of low or high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. including brackets and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap including low PVC level flushing cistern 10 lit capacity complete all as specified and as directed. |
| 72 | S & F in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550mm X 400mm including Sawn neck Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered \\"Hot\\" or \\"Cold\\" with long screwed shanks and fly nuts screwed for iron pipe and fixed, 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified and as directed. |
| 73 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 74 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed. |
| 75 | S & F factory made single rebated Wood Polymer Composite [WPC] solid door/ window / ceosetory windows & other Frames/ Chowkhats of size 65mm x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as specied and as directed. |
| 76 | S&F wood plastic composite (WPC) factory made door shutter of 30 mm thickness made out of single pieces extruded WPC (wood plastic composite) profile with homogenous fine cellular structure made with plastic and wood powder having solid structure which is Eco friedndly with density not less than 650 kg/cum,and UV digitally printed to the desired design with UV Lacquar coated to give surface added strength and protectionand high grade UV resistance and with heat, fire retardant will be hung and screws withdrawl strength 1800 N(face) & 900 N (edge), minium compressive strength of 50N/MM2 , E=900 N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof water/ moisture proof and fire retardant and fixing with stainless stel butt hinges of required size with necessasry full body threaded star headed counter sunk S.S screw of size 10mm dia and 100 mm long , all as per direction of Engg-in- Charge |
| 77 | S & F PVC Solid Ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube, the two vatted profiles are to be reinforced with 19 x 19mm MS squre tube, 50% of bottom portion is fixed with 4mm thick pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass louvers and covered with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc. complete all as specified and as directed.Make:-Sintex or equivalent sheeting in NANDI make as approved by GE) |
| 78 | M&L for Powder coated aluminium sections of approved colour for doors, Windows, Ventilators, Partitions, with frames and shutters fully or partly glazed, sliding / openable, with extruded aluminium sections not less than 1.5mm thick and powder coating not less than 50 micron thick including necessary jointing cleats, rubber beading, neoprene packing, aluminium snap beading, screws, powder coated aluminium fittings such as handles, aluminium butt hinges , aluminium tower bolts, stainless steel friction hinges, locking arrangements etc. Notes:(a) The size of aluminium extruded sections shall conform to Designation 63400 all shall be as specified in relevant IS code and as specified in MES Schedule Part - I. (b) Panel inserts such as Glass / Particle board / Gauze shall be measured and paid separately at supply only rates.(c) Weight of aluminium sections shall only be accounted for payment purpose. Weight of aluminium Handles, Butt Hinges & Tower Bolts shall not be accounted for payment purpose. (d) The unit rate quoted shall be deemed to include for cost of jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts, stainless steel friction hinges, Peg stays, locking arrangements etc., and fixing only of panel inserts of glass / particle board / gauge etc. (e) While making payment in kgs, the wt arrived from differerent sections shall be tallied with total wt of doors, Windows, Ventilators, Partitions with frames and shutters. |
| 79 | S & F 35mm thick, factory made Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I and fitted to Chowkats complete all as specified and as directed. |
| 80 | M & L for 2nd class hardwood 35mm thick Factory made, plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically presure treated fitted to chowkats complete all as specified and directed. |
| 81 | M & L for Factory made 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified |
| 82 | M & L for Plain / Reinforced cement concrete Type B1, 1:2:4 using 20mm graded stone aggregate copings, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, cast in situ in lintels up to 1.5m span, parapets and railings up to 60 cm in height, kneelers, apex stones, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and as directed. |
| 83 | S & F mild steel work as in Bands, straps, hold fasts, stiffners for fencing posts, struts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 84 | Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned stacks or stainless steel wire staples complete all as specified and directed. |
| 85 | Supply only 5.0mm thick sheet glass, ordinary quality fixed to aluminium windows in squares exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 86 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed. |
| 87 | S & F Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed. |
| 88 | S & F Stainless steel Butt hinges, 125mm size with galvanised mild steel hinge pin complete all as specified and directed. |
| 89 | S & F Stainless steel Butt hinges, 100mm size with galvanised mild steel hinge pin complete all as specified and directed. |
| 90 | S & F extruded aluminium alloy handles fabricated type anodised of size 150mm complete all as directed. |
| 91 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer and wooden putty complete all as directed. |
| 92 | S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned stacks or stainless steel wire staples complete all as specified and directed. |
| 93 | S & F floor door stopper of aluminium body and tongue anodised with hand drawn steel spring fixed in flooroverall length of cover plate 150mm complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 94 | S & F floor door stopper of aluminium body and tongue anodised with hand drawn steel spring fixed in flooroverall length of cover plate 150mm complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender