Tender For Special Repairs To Chdh (Cook House & Dining Hall) Of Bldg No P-120 & P-121 Of 13 Mahar At Aundh Mil Stn Under Ge (Mh & Rh) Khadki.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Oct 2026
9 days left
EMD
81000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Chdh (Cook House & Dining Hall) Of Bldg No P-120 & P-121 Of 13 Mahar At Aundh Mil Stn Under Ge (Mh & Rh) Khadki.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete unreinforced of any description and in any position, not otherwise specifically provided for and M & L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregates for filleting, benching, slightly rounding or chamfering on edges, filling undulations / depressions in roof surface, providing concrete platform for tanks wherever required as directed. |
| 2 | Taking down / removing existing water proofing treatment from RCC roof slab including removal of plaster bed below felt / membrane and disposal of the same to distance exceeding 50m but not exceeding 100m as and where directed and M & L for 10 mm thick screeding / rendering in cement mortar 1:3 on concrete roof surface, using Water Proofing Compound @ 3% by weight of cement, surface finished even and smooth without using extra cement all as directed.Note: Water Proofing Compound shall be measured and paid separately. |
| 3 | Supply only intergral water proofing compound. |
| 4 | M&L for Cutting out cracks to \\"V\\" section in existing roofs or terracing, cleaning out wetting grouting with cement and sand slurry 1:3 |
| 5 | M & L for cleaning the plastered /concrete surface with wire brush and applying water proofing treatment as under:-(a) Apply a uniform coat of primer at 0.70 kg/sqm over cement plaster. (b) 3 mm thick and weighing not less than 3.6 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen - based prefabricated five layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87 - 0.89 kg/litre and viscosity 70-160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary preparation of surface complete as per manufacturers instructions. (c) Apply two coats of bitumastic - aluminium paint over the membrane. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing coat) |
| 7 | M & L for Vitrified ceramic tiles 10mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 8 | Ditto all as in item No.7 above but as in skirting /dados including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 9 | M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile n exceeding 0.11 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick in CM (1:6) Screed bed or bedding layer of mortar for laying floor finishes all as specified and directed. |
| 10 | M&L Coloured Glazed ceramic tiles 450X300X7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 all as specified and directed. |
| 11 | Demolition of brick work or stone masonry or block masonry built in cement or cement/lime mortar. |
| 12 | M&L for PCC solid block masonry of blocks of type C1 (20mm graded stone aggregate) (1:3:6) wall exceeding 10cm in width & built in CM (1:6) complete all as specified and directed. |
| 13 | M&L for 20-25mm thk machine cut cuddappah stoneas in slab flooring over cement screed bed laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab incl grinding polishing laid over 15 mm thick screed in CM 1:6 complete all as specified. |
| 14 | Dismantling of old stone slab of any description. |
| 15 | M & L for 20mm thick Granite slab machine cut in laid over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including screed bed 15mm thick in CM 1:4. |
| 16 | M & L for 20mm thick Granite slab machine cut in dado/skirting over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including rendering of 10mm thick in CM 1:4. all as specified and directed |
| 17 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 18 | M&L machine cut kota stone slab flooring 20-25mm thick in flooring but one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over 15 mm thick screed bed or bedding in CM 1:6 for laying floor finishes, all as specified and directed. |
| 19 | Taking down cement or cement lime plaster on brick or stone walls,ceilings etc. including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed. |
| 20 | M & L for 15 mm thick plastering in cement mortar 1:4 on external plaster finished the surfaces (upto any height) using 3% of WPC of weight of cement used or as per manufacturer instruction complete all as specified and directed. |
| 21 | Material & Labour for preparation to new surface and applying finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified & directed. |
| 22 | M&L for complete removal of existing treatment, preparing the surfaces and applying finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and directed. |
| 23 | ditto all as in item No. 22 above 10mm thick in CM 1:4 finished even & smooth with finish but as in ceiling complete all as specified and directed |
| 24 | M & L for applying three coat of white wash on ceiling including preparation of new surfaces all as specified and directed. |
| 25 | M & L for applying one coat of white wash on celing on old surfaces including preparation of old surfaces including cleaning smoke efflorocense of any type or spot of nail filled with putty complete match to old surface all as specified and directed. |
| 26 | M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces including putty finishing the surface all as specified and directed. |
| 27 | M&L for preparation of old brick/concrete/stone surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint ( 1st grade quality ) complete all as specified and as directed. |
| 28 | M&L for preparation of new brick/concrete/stone surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over priming surface complete all as specified and as directed. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50m but n. exc 4.00 sqm |
| 30 | Taking down shutter from frame exc 1 and n.exc 2 Sqm each ans removing from the site all as specified and directed |
| 31 | Supplied and fitted to chowkats 35 mm thick second class factory made Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); all as directed. |
| 32 | S & F Aluminium, anodised, barrel tower bolts of extruded section 200 mm long. |
| 33 | S & F Aluminium handles, cast type, anodised size 150 mm long. |
| 34 | S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 35 | S & F in repair Mild steel Butt hinges100 mm long, medium weight, cold rolled steel. |
| 36 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on old wooden surfaces of width or girth exceeding 10 cm including preparation of surfaces all as specified. |
| 37 | S&F Solid PVC door frame of size 50mm X47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing. |
| 38 | S & F MS Butt hinges 75 mm long, medium weight, cold rolled steel. |
| 39 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing Complete all as specified and directed. |
| 40 | S & F Aluminium, anodised, barrel tower bolts of extruded section 125mm long complete all as specified and directed. |
| 41 | S & F Aluminium handles, cast type, anodised size 125 mm long. |
| 42 | Taking down chowkat without taking off shutter from frame n.exc 1.5 sqm each all as specified and directed. |
| 43 | S&F Powder coated aluminium powder coated window sliding type (3 track) with frame size100x35x1.2mm and shutter 39.40x17.70x1.2mm with tow glass shutter & one mesh shutter incl necessary jointing cleats cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with 4mm plain float glass & 0.56 mm dia SS wire mesh, fittings etc of complete all as specified. |
| 44 | S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to new steel window with nut bolt,fixed complete all as specified and directed. |
| 45 | S&F Powder coated aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. all as directed by Engr-in-Charge. |
| 46 | S &F mild steel work in framed work such as grills framed guard bars, gratings, ladders etc with ends of bars shouldered and / or riveted or forged into spikes and similar work. |
| 47 | M & L for preparation of New steel surfaces exc 10 cm width or girth and applying one coats of synthetic enameled paint . |
| 48 | S&F in repairs powder coated aluminuium pipe 20 mm dia as in curtain rod fixed to brackets all as specified and directed.Note brakets shall be measured and paid separately. |
| 49 | S & F in repairs powder coated aluminium brakets fancy type for curtain rods of 20mm dia ,all as specified and directed. |
| 50 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth |
| 51 | Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required. |
| 52 | Ditto-all as above Item No. 51 but 20 mm dia pipe etc. |
| 53 | S & F 15 mm bore of pipe medium grade steel tubes, galvanised with & including all fittings and fixed complete to concealed walls and ceilings or laid in floors. |
| 54 | .---- do ---- all as per serial item No. 53 above but except steel tubing. |
| 55 | S & F 20 mm bore of pipe medium grade steel tubes, galvanised with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 56 | Dismantling water tank of any description or capacity 500 ltrs all as specified as directed. |
| 57 | S & F Rotational moulded polyethylene water storage tanks ( cylindercal veritcal with closed top) hoisted and fixed inposition 500 ltrs capacity all as specified. |
| 58 | S&F Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe and fixed in repair |
| 59 | S & F in repairs 20mm dia bore Gun metal, globe or gate valves with Iron wheel head, screwed both ends for Iron pipes and fixed. |
| 60 | S & F in repair angle stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm. |
| 61 | S & F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm but fancy type with long shank and cup ( concealed type) complete all as specified and directed by Engineer in Charge. |
| 62 | S&F in repairs fency type two way Bib cock 15mm dia , fancy type, chromium plated with capstan or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed all as specified and directed (Make :Jaquar/Hindware/Cera or equivalent). |
| 63 | S&F in repairs fancy type heavy duty health faucet chromium plated (ABS Body) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook fixing to 15 mm bore of pipe all as specified and directed.(Make :Jaquar/Hindware/Cera or equivalent). |
| 64 | S&F in repairs 15mm dia fancy type Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 65 | S & F PVC connections 15 mm size with PTMT nuts of 600 mm long |
| 66 | S&F in repair PVC (SWR) pipes 110mm dia ,single socketed in any length with rubber ring joints laid in trenches or floor complete all as directed. |
| 67 | S&F in repairPVC (SWR) pipes 110mm dia ,single socketed in any length with rubber ring joints fixed to walls |
| 68 | S&F in repair,PVC (SWR) pipes 75 mm dia ,single socketed in any length with rubber ring joints fixed and laid in trenches or floor all as directed. |
| 69 | S&F in repair,PVC (SWR) pipes 75 mm dia ,single socketed in any length with rubber ring joints fixed to walls |
| 70 | S&F in repair,PVC (SWR) bends any radius,for 110mm dia pipe. |
| 71 | S&F in repair,PVC (SWR) bends any radius, 75mm dia pipe. |
| 72 | S&Fin repair,PVC (SWR), junction single, (Single T) equal or unequal,for 110mm dia pipe. |
| 73 | S&F in repair,PVC (SWR), junction single, (Single T) equal or unequal,75mm dia pipe. |
| 74 | S & F in repairs wash down water closet ( European type) excluding fixing bolts, flushing cistern, & flush pipe but including connecting to existing out let pipe etc all as specified and directed. |
| 75 | S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed. |
| 76 | S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. |
| 77 | S&F in repairs vitreous china wash basin white, flat back of size 450 x 300mm, excluding taps, waste chain & plug & porcelein stopper but including brackets, cutting for and pinning in ends of brackets all as directed. |
| 78 | S&F in repairs PVC waste outlet pipe for 32/40mm dia WHB / Sink complete all as specified and directed. |
| 79 | S&F in repairs 32 mm bore waste fittings, brass, chromium plated for sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete. |
| 80 | S&F in repair pillar taps fancy type cast copper alloy with capestan heads chromiun plated screwed down high pressurewith hot &cold with long screwed shanks and fly nuts all as specified and directed. |
| 81 | S&F in repairs for 600mm x 450mm bevelled edge mirror of selected quality glass,mounted on 6mm thich AC Building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers all as specified and directed |
| 82 | S&F in repairs 150mm rubber door stopper of aluminium alloy body, anodised all as specified and directed. |
| 83 | S&F 20mm dia or over pre polished and moulded granite corner shelf fixed in CM 1:3 to wall and maked good with putty filling with colour match to existing surface complete all as specified and directed by EIC. |
| 84 | S&F in repairs tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated all as specified and directed. |
| 85 | M&L 75 mm dia cast iron floors trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), all as specified and directed. |
| 86 | M&L for PCC 1:3:6 type C-2 , 75 mm thick as in plinth protection all as specified and directed |
| 87 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 88 | S&F II class hardwood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together wit glue pinned at joints complete all as specified and directed. |
| 89 | S&F in repairs 12mm thick Veneered decorative plywood grade 1(with BWR resin) with only one face has decorative veneer & other side balancing white lamination fixed with screws to timber frame , all as sepcified and directed. |
| 90 | S & F in repair Contineous Piano hinged 30mm width of flaps (when open), mild steel, bright finish or electrogalvanised all as specified |
| 91 | S&F Hasp and staple 150mm long, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws |
| 92 | S&F 75mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed |
| 93 | S&F 100mm long Aluminium handles, cast type, anodised |
| 94 | S & F in repair ss magnetic catchers all as specified |
| 95 | Excavation in trenches not exceeding 1.50m wide and 1.50m depth for foundation, etc., for Shaft wells, Manholes etc not exceeding 10sqm on plan and not exceeding 1.50m in depth and getting out in soft / loose soil all as specified and directed. |
| 96 | Returning filling in including spreading leveling watering well ramming in layers not exceeding 25cm thick with soil obtained from excavation all as directed. |
| 97 | Removing excavated surplus soil not exceeding 50m and depositing where directed at a level exceeding 1.5m above the starting point all as directed. |
| 98 | Demolition and breaking up drain pipes of 150 mm bore RCC/SGSW set in cement mortar including removing the debries to a distance n exc 100m,where directed |
| 99 | All as per item No. 98 above but dia of pipe 200mm. |
| 100 | M&L for PCC M-7.5 grade nominal mix using 40 mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against sides of pipes with concrete after they are laid and bedded dia of pipe 150mm all as specified and directed. |
| 101 | All as per item No. 100 above but dia of pipe 200mm. |
| 102 | M&L for 150mm dia RCC drain pipes class NP2 laid in trenches and jointed with in cement mortar all as specified. |
| 103 | All as per item No. 102 above but dia of pipe 200mm. |
| 104 | M&L cutting to existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benchings for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1, using 20mm graded stone aggregate, smooth finished and reforming benching as required for internal dia of pipe 150mm all as directed. |
| 105 | S&F RCC precast Sewage manhole cover MD grade of size 450x900mm thickness 25-30 mm and set the same at the site including removing old from site in any position complete all as specified and directed by EIC |
| 106 | Dismantling wrought iron or mild steel work of any description not othervise provided for |
| 107 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed. |
| 108 | M&L for point wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through non metallic rigid PVC conduit and accessories concealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes to provision of Modular switches to house switch/regulators etc including Modular Plate and Covers for one fan/light /bell point controlled by one switch/bell push complete all as specified and directed. |
| 109 | All as per item No 108 above for one 3 pin 5 Amps socket on same board controll with other switches on same board |
| 110 | All as per item No 108 above for one 3 pin 5 Amps socket on independent board |
| 111 | All as per Item No 108-in- before but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5 sqmm cable as earth continuity conductor for Power Socket on independent board on the Concealed conduit complete all as specified and directed. |
| 112 | All as per Item No 108.here-in- before but with 4 Sqmm PVC insulated multistranded copper conductor with 4 sqmm cable as earth continuity conductor for Power Socket/AC/Geysers on independent board on the Concealed conduit complete all as specified and directed. |
| 113 | Supply and fix modular switch 1 way 6A 1 module complete all as specified and directed. |
| 114 | Supply and fix modular socket 6A 2/3 pin combined 2 module complete all as specified and directed. |
| 115 | Supply and fix modular socket 16A 2/3 pin combined 2 module complete all as specified and directed. |
| 116 | Supply and fix modular switch 1way 16A 1 module complete all as specified and directed. |
| 117 | Supply and fix Modular fan regulator, 230 volts complete all as specified. |
| 118 | Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed. |
| 119 | Supply & fix in replacement LED fitting for Bldg security, 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete. including conncting with copper condector 3 core flexible cable from fitting connector to ceiling rose and fix on wall with clamps & nut bolts and necessary GI bracket made of 32 mm light grade GI pipe of 1 mtr lenth with necessary bending complete all as specified and directed . |
| 120 | Taking down old unserviceable fitting and S & F wall mounted extruded aluminium housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4 feets long) lumen 2000 -3000, PF> 0.95, THD less 10% diffused connecting with suitable size of flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. |
| 121 | S & F wall/ceiling mounted LED tube light fitting aluminium body , Energy efficient high quality invertor batten having Lithium ion battery of 3.7V, 19 WH for backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 22 watt having colour temperature 6500 K (4 feets long) , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with flexible copper wire of suitable size from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Jaquar/Halonix/Philips/Havells . |
| 122 | Taking down old unserviceable Recess mounting fitting of any type from any height and S & F high quality Recess/Surface mounting/POP ceilings mounted LED Flat panel 36 Watts size 2'x2' made of die cast aluminium housing with high efficient LEDs glare free opal diffiuser, with IP 20 protection complete as per site requirement connecting with suitable size of flexible copper wire as directed by Engr-in-charge. Make : Hanolex/Jaquar/Havells.Note :- (i) The rates are inclusive of civil work (minor plastering, painting, false ceiling repair etc) wherever required for fixing the fittings to the roofs/POP celings/False ceilings. |
| 123 | Supply and fixing in replacement LED Light fitting mirror type with high output diffuser 2 feet , 1 X 10 watt 220 V AC decorative type with driver holder and LED lamp, Alluminium housing, including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed. |
| 124 | Taking down unserviceable submain wiring andM&L for sub main wiring in repair but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into medium grade PVC Conduit concealed in walls of suitable size including 4 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface complete all as specified and directed by Engr-in-Charge.Make:- Polycab /Finolex/ RR |
| 125 | Taking down unserviceable submain wiring and M&L for submain wiring in PVC conduit concealed in walls/ceilings with two runs of 6 sq mm and one runs of 6 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS 694) drawn through and including 25 mm dia PVC rigid connduit heavy grade ISI marked (IS 9537 Part III) includung accessories such as bends, supports etc all as specified and directed. Note: Two runs of 6 sq mm and one runs of 6 sqmm cable along with conduit shall be measured as one length. |
| 126 | S & F MCB DB SPN 12 way of any size and capacity double door type horizontal with 200A busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and directed. |
| 127 | S & F MCB SP of capacity 5A - 32A \\"B' curve all as specified and directed. |
| 128 | S&F MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve all as specified and directed. |
| 129 | Taking down unservicable earthing , M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt & charcoal including , excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. |
| 130 | Taking down old unsv exhaust fan and depositing it to MES store and Supply and fix Exhaust fan steel body AC single phase , 230 volts of size 300 mm sweep with blades and frame and louvers complete all as specified.Note : (i) To be Fixed in Kitchen/Toilet window (ii) The rates are inclusive of any civil work required to fix the exhaust fan. |
| 131 | Taking down old unsv ceiling fan and depositing it to MES store and Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator/remote and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). complete all as specified and directed. |
| 132 | Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amp DP MCB all as specified and directed. |
| 133 | Taking down old unsv Geysers and depositing it to MES store and Supply and fix (Geyser) Water heater storage type of capacity 50 Liters vertical type wall mounted including 15/16 Amps plug top with suitable wall supports and for manual operation, digital temperature display, feather touch buttons, built in thermostat, auto shut off, powder coated single line weld container with PUF insulation, heating element capacity of 2 KW, voltage rating 230 Volt, frequency 50 Hz, 5 star rated with and including steel braided connecting hoses of required length for Hot and cold water pipe, connecting to CPVC and GI pipe all as specified and directed by Engr-in-Charge. Make: Havells/Jaquar/Crompton/Bajaj.Note :- (i) The rates are inclusive of all the minor spares (Fasteners, Nut bolts washers etc) required for making the geyser fully functional. |
| 134 | Supply and fix Hot water pillar taps 15 mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed all as specified and directed by Engr-in-Charge. |
| 135 | Supply and fix Stop Valves , cast copper alloy, screwed down , high pressure with crutch or butter fly handle , screwed both ends for iron pipe or for unions and fixed of size 15 mm all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender