Tender For Special Repair / Replacement Of Certain Earthing And Lightening Infrastructure And Provn Of Lightening Protection System With Earthing Pits At Newly Inducted Hut At Af Stn Bareilly Under Ge(Af) Bareilly.
Tender Value
25.49 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
15 days left
EMD
50980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair / Replacement Of Certain Earthing And Lightening Infrastructure And Provn Of Lightening Protection System With Earthing Pits At Newly Inducted Hut At Af Stn Bareilly Under Ge(Af) Bareilly.
BOQ
| Sl. No. | Item Description |
| 1 | Taking out old earthing Infra with test point and GI pipe compete all as specified. |
| 2 | M&Lfor earthing comprising of copper earth plate electrode 600 mm X 600 mm X 3.15 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 mtr below normal ground level and connected to copper earth strip of size 20mm X 3mm by means of nut-bolts, check nuts and washers of galvanised iron or steel all as shown on Electrical plate No. 3 of MES schedule Part–I (Specifications) and connected to main switch board / main DBs / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust and common salt all around the earth plate in alternate layers of minimum 150 mm (compacted thickness) in all directions with and including GI watering pipe 20 mm bore, medium grade, with funnel made out of 0.63 mm thick GI sheet, GI protection pipe light grade 40 mm bore complete all as specified and directed. Note: The earth resistance value should be less than 3 ohm failing which the contractor shall re-do the earthing without any extra cost. |
| 3 | M&L for chemical earthing complete with Copper earth plate electrode 900mmx 600mm x 5 mm thick buried directly in ground vertically to depth not less than 3.00 mtr below ground level with top edge of earth plate at a depth not less than 2.25 mtr below normal ground level and connected to and including copper strip of size 32x6mm as earth lead up to 7.5 mtr long fixed by means of bolts, nuts, check nuts and washers or brazing etc. of galvanised iron or steel including provn of GI protection pipe light grade of 40mm bore and connected to earth strip earthing test point all as shown in Electrical plate No.5 of SSR Part-I all as specified and testing on completion including necessary excavation & earthwork in any type of soil, cement concrete (1:3:6) type C-1 in chamber, RCC precast slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire fabric XPM of weight not less than 4 kgs/sqm with frame, funnel with GI watering pipe of 15mm bore medium grade, wire mesh and lugs, test point including salt (150Kgs), Coal dust(100Kgs) & Magnesium sulphate (150Kgs) including refilling of earth pit with cultivated soil and removal of surplus soil upto 50mtrs apart complete all as specified. Note: The earth resistance value should be less than 1 ohm failing which the contractor shall be re-do the earthing without any extra cost. |
| 4 | M&L for test point terminal block made of gun metal or phosphorus bronze size (75x75x25)mm drilled and screwed including 3 nos. 8mm dia 25mm long hex head screws for holding the bronze plate including fastening/ bolting the roof down conductor and earth electrode over the bronze plate with copper bolts & nuts of suitable size complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 5 | M&L for test point terminal block made of gun metal or phosphorus bronze size (75x75x25)mm drilled and screwed including 3 nos. 8mm dia 25mm long hex head screws for holding the bronze plate including fastening/ bolting the roof down conductor and earth electrode over the bronze plate with copper bolts & nuts of suitable size complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender