Tender For Repair/Maint Of Interlocking Tiles/Hard Standing And Other Connected Works At Tech Area At Under Ge (Af) Jamnagar No. 1
Tender Value
40 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Interlocking Tiles/Hard Standing And Other Connected Works At Tech Area At Under Ge (Af) Jamnagar No. 1
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/ boulder masonry / PCC block masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material & Labour for Precast cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in block masonry with solid bocks, exceeding 10cm width and set in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & Labour for cement concrete 1:2:4 type B-1, 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris outside MOD land, complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material & Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces (exterior weather coat) paint in normal/camouflage pattern as directed by Engr-in-Charge of any tint as approved over one coat of primer, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Demolition of concrete (un-reinforced) in ground floors and paving’s not exceeding 15 cm thickness (below or above ground level) including removal of debris to out of MoD land, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material & Labour for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and paving’s etc., complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material & Labour for rubber moulded chequered glazed cement concrete tile with grey cement and pigment (of approved tint) of size 300mm x 300mm x 25mm thick over and including 15mm thick screed bed in Cement Mortar 1:6, set jointed and pointed in neat cement slurry, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material & Labour for cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in road / hard standing of thickness 150mm including steel formwork and finishing the surface using floater etc., complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & Labour for Forming contraction joints (Dummy) in concrete pavement, 30mm deep x 10mm wide priming & filled with sealing compound Grade 'A', complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material & Labour for sand cushioning 25mm thick over concrete surfaces, spread, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness, with minimum compressive strength of 35 N/sqm (M-35), without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with grey cement and pigment laid, complete all as specified and directed by Engineer-in-Charge. |
| 14 | Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc. exceeding 25 but not exceeding 50 sq.cm, complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material & Labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Demolition of laid dry or laid dry and pointed Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed by Engineer-in-Charge. |
| 17 | Demolition of concrete reinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including removal of debris to out of MoD land, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Separating, scraping and cleaning of reinforcement (demolition of concrete measured separately), complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & Labour for providing precast cement concrete Type B-1, 1:2:4 (20mm graded aggregate) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces Set in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. Note:- reinforcement steel will be measured and paid separately. |
| 20 | Material & Labour for Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply & Fixing mild steel angle iron and flats including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply & Fixing in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing’s and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply & Fixing in repairs galvanized concertina coil of 1060mm dia made of 0.5mm thick, 19mm wide strip & 2.59 mm dia high tensile wire, 125 Nos of clips, having 56 Nos of circles and covering 8 to 10 running mtr and 'S' clips per spiral using a central core of high tensile wire around which a tape of razor sharp barbs is machine crimped etc., complete all as specified and directed by Engineer-in-Charge. |
| 25 | Taking down chain link fencing of any mesh size/any type including link wire to any type of standard rails/ supports etc & straining bolt etc., including binding wire, complete all as specified and directed by Engineer-in-Charge. |
| 26 | Fixing only chain link fencing of any mesh size/any type including link wire to any type of standard rails/ supports etc & straining bolt etc., including provision of binding wire, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply for Chain link MS galvanised fencing, any size or type, etc., complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material & Labour for mild steel round bar 10mm and over as in tightening of chain link fencing including cutting to shape, necessary drilling, bolting etc Fe-410-W (Gde E-250) quality -A or Fe 290 (Gde-E-165), complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply & Fixing mild steel bands, straps, supports or stays for rainwater pipes, soil/ waste or vent pipes including bolts, if required, in hold fast; wall ties; hooks for hanging fans and similar small article confg to Fe- 290-Gde - E-165, complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply & Fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 but not exceeding 10 cm long, Diameter of neck in 16 to 20mm, etc., complete all as specified and directed by Engineer-in-Charge. |
| 31 | Material & Labour for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Material & Labour for preparation of Old steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Material & Labour for preparation of new steel surfaces not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Material & Labour for water based polyurethane acrylic floor paint, anti-slip, strong weather resistance, and self-cross linking durability on old interlocking tiles including repair cracks or broken edges with a suitable concrete filler, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender