Tender For Maintenance And Repairs Of Internal Electric Fittings, Fixtures, Certain Equipments & Connected Items At Omq Of Spe Camero Area And Other Connected Areas Of Camero Complex Under Ge (Af) Subroto Park And Comprehensive System Maintenance For
Tender Value
34 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
11 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Repairs Of Internal Electric Fittings, Fixtures, Certain Equipments & Connected Items At Omq Of Spe Camero Area And Other Connected Areas Of Camero Complex Under Ge (Af) Subroto Park And Comprehensive System Maintenance For Amr Meter At Camero Married Accomodation Under Ge (Af) Subroto Park
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper / aluminium point wiring light, fan, light fittings, socket or power complete, such as switches, ceiling roses, pendents, regualtors, sockets etc removing materials to store for keeping in safe custudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc complete all as specified and directed. |
| 2 | M&L for point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS), ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit after cutting, chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for modular plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cables as earth continuity conductor to common earth and connecting to earth dolly for one light /fan /ex fan point controlled by one switch. (Note- Modular switch and sockets will be measured and paid separately) |
| 3 | All as per item No 2 above but For one bell point controlled by one bell push |
| 4 | All as per item No 2 above but for one 3 pin socket outlet , 6 Amps on same board |
| 5 | All as per item No 2 above but for one 3 pin socket outlet , 6 Amps on Independent board |
| 6 | For one light point controlled by two 2 - way SP switches |
| 7 | All as per item No 2 above but with 2.5 Sqmm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sqmm PVC insulated copper conductor unsheathed 1100v grade IS-694 FRLS cable for continuous earth wire 2.5 Sqmm FRLS all as specified and directed by Engr-in-Charge (Only one 15 Amp point will be in one circuit) |
| 8 | All as per item No 2 above but with 4 Sqmm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sqmm PVC insulated copper conductor unsheathed 1100v grade IS-694 FRLS cable for continuous earth wire 2.5 Sqmm FRLS all as specified and directed by Engr-in-Charge (Only one 15 Amp point will be in one circuit) |
| 9 | M&L for point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS), ISI-694 marked drawn through in existing steel/ PVC concealed conduit , including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for modular plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cables as earth continuity conductor to common earth and connecting to earth dolly for one light / fan/ ex fan point controlled by one switch. (Note- Modular switch and sockets will be measured and paid separately) |
| 10 | All as per item No 9 above but For one bell point controlled by one bell push |
| 11 | All as per item No 9 above but for one 3 pin socket outlet , 6 Amps on same board |
| 12 | All as per item No 9 above but for one 3 pin socket outlet , 6 Amps on Independent board |
| 13 | All as per item No 9 above but For one light point controlled by two 2 - way SP switches |
| 14 | All as per item No 9 above but with 2.5 Sqmm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sqmm PVC insulated copper conductor unsheathed 1100v grade IS-694 FRLS cable for continuous earth wire 2.5 Sqmm FRLS all as specified and directed by Engr-in-Charge (Only one 15 Amp point will be in one circuit) |
| 15 | Modular switch 6 Amps, 230 V, single pole, two way, 1 module complete all as specified and as directed |
| 16 | Modular switch 6 Amps, 230 V, single pole, one way, 1 module complete all as specified and as directed |
| 17 | Socket modular type 2/3 pin combined 2 module, 6 Amps, 230V complete all as specified and as directed. |
| 18 | Modular switch 16 Amps, 230 V, single pole, one way, 1 module complete all as specified and as directed |
| 19 | Socket, modular type 2/3 pin combined,2 module, 6 Amps/16 Amps complete all as specified and as directed. |
| 20 | Modular step step type fan regulator suitable for ceiling fan of 1200mm sweep, 120 watts, 2 module complete all as specified and as directed. |
| 21 | Supply and fixing for modular bell push 6 Amps 230V, single pole, one way, 1 module complete all as specified and as directed. |
| 22 | M&L for point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLSH), ISI-694 marked drawn through in existing steel/ PVC concealed conduit and making good of disturbed surface, , excluding mild steel sunken boxes but includes 3 mm thick laminated hylam sheet top cover for fixing switches, switch socket outlets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLSH) single core cables as earth continuity conductor to common earth and connecting to earth dolly for one light / fan/ ex fan point controlled by one switch. (Note- Piano switch and sockets will be measured and paid separately) |
| 23 | All as per item No 22 above but one bell point controlled by one No bell push |
| 24 | All as per item No 22 above but for one 3 pin socket outlet , 6 Amps on same board with the cables 1.5 Sqmm size complete all as specified and directed. |
| 25 | All as per item No 22 above but for one 3 pin socket outlet , 6 Amps on independent board with the cables 1.5 Sqmm size complete all as specified and directed. |
| 26 | All as per serial item No.22 here-in-before but For one light point controlled by two 2 - way SP switches |
| 27 | All as per serial item No.22 here-in-before but wiring with 2.5 Sqmm including 2.5 Sqmm PVC insulated unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core earth continuity conductor connected to common earth dolly for one 3/5 pin 15 amps switch socket out let on independent board. |
| 28 | M&L for point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sqmm (nominal cross-sectional area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLSH) conforming to IS-694 with multistranded copper conductor drawn thorugh and including PVC casing and capping /surface conduit complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI marked) for mounting switches/regulator etc and including 1.50 Sqmm (nominal area) , PVC insulated unsheathed multistranded FRLSH copper conductor cable 1100 volts grade, single core for earth continuity conductor connected to common earth dolly for light/fan/bell point controlled by one switch and making good disturbed surfaces of walls, floors etc for light/fan/bell point complete all as specified and directed.Note- Piano switch and sockets will be measured and paid seperately) |
| 29 | All as per Item No 28 herien before but one 3 pin socket outlet, 5 Amps, independent board. |
| 30 | All as per Item No 28 herien before but one three pin switch socket 5 Amps plug point on same board |
| 31 | All as per item No 28 herein before but point wiring with 2.5 Sqmm single core multi stranded copper conductor FRLSH, for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly. |
| 32 | All as per item No 28 above but with 4 Sqmm cable for Independent board one 3 pin 15 Amps socket outlet including single core 2.5 Sqmm PVC insulated copper conductor unsheathed 1100v grade IS-694 FRLS cable for continuous earth wire 2.5 Sqmm FRLS all as specified and directed by Engr-in-Charge (Only one 15 Amp point will be in one circuit) |
| 33 | Switch piano 5 Amps flush type single pole two way suitable for 240 volt AC |
| 34 | switch piano, flush button single pole one way 5 Amp complete all as specified and as directed. |
| 35 | Socket out let 3 pin 5 Amps, flush type complete all as specified and as directed |
| 36 | Switch piano 16 Amps flush type single pole one way suitable for 240 volt AC complete all as specified and directed by Engr-in-Charge |
| 37 | Socket outlet 2 in 1, 5 pin 16 Amps flush type suitable for 240 volt AC complete all as specified and directed. |
| 38 | Step type fan regulator suitable for ceiling fan of 1200mm sweep, 120 watts, complete all as specified and as directed. |
| 39 | Bell push, flush type 5 Amp complete all as specified and as directed. |
| 40 | Supply and fix ding dong bell AC 230 volt single pole complete all as specified and directed. |
| 41 | Supply & fix in replacement batten holder PVC white suitable for retrofit type CFL/LED lamp complete all as specified and as directed. |
| 42 | S&F in repair LED lamp E22/27 bulb base of 9 watts 6000K complete all as spfd and directed. |
| 43 | S&F in repair LED lamp E22/27 bulb base of 9 watts 3000K complete all as spfd and directed. |
| 44 | Supply and fixing of ceiling rose, surface bakelite, 65mm x50mm 2 or 3 terminals, PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed. |
| 45 | S&F socket outlet 2 in 1, 5 pin 25 Amps flush type suitable for 240 volt AC complete all as specified and directed. |
| 46 | S&F Modular MCB SP 25 Amps 10 KA, 240 volt 1 module all as specified and directed by Engineer-in-charge. |
| 47 | Disconnection and removing the u/s casing caping conduit and S&F PVC casing caping of size 20mm including cut to shape and size to match the existing conduits suitable for LT electric supply along with necessary fixing arrangements complete. |
| 48 | M & L fir in circuit/submain wiring with two run of 2.5 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 2.5 sqmm PVC insulated but unsheathed FRLS cable for earth continuity conductor drawn through PVC casing caping, medium grade,complete with all accessories and fittings all and complete all as specified.Note - 3 Runs of 2.5 Sqmm and one run of PVC casing caping will be used as one unit for measurement purpose. |
| 49 | All as per item No 48 above but for 1.5 sqmm wire |
| 50 | Taking down old unsv VTPN DB of any size complete all as specified and directed |
| 51 | Supply and fixing DB VTPN 08 ways with provision for FP MCB/isolator/ RCCB/ MCCB etc 'A' Frame as incomer and SP/TP as outgoing double door IP 54 complete prewired including 250 Amp bus bar etc suitable for operation on 415 volts 50 Hz AC supply, suitable for TP incomer MCCB of 125/160 Amps including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surfaces to match with existing colour of wall complete all as specified and as directed. |
| 52 | Supply and fixing DB VTPN 04 ways with provision for FP MCB/isolator/ RCCB/ MCCB etc 'A' Frame as incomer and SP/TP as outgoing double door IP 54 complete prewired including 250 Amp bus bar etc suitable for operation on 415 volts 50 Hz AC supply, suitable for TP incomer MCCB of 125/160 Amps including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surfaces to match with existing colour of wall complete all as specified and as directed. |
| 53 | Taking down old unsv MCB SPN DB of any size complete all as specified and directed. |
| 54 | M & L in replacement MCB distribution board with bus bar 200 A, neutral link, earth bar made out of CRCA mild steel sheet with double door category of protection type IP- 42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB SPN 08 way 230 Volts, horizontal type ,concealed in wall such that front cover shall be seen flush with the wall surface all as specified and directed. Note :- MCB SP/SPN shall be measured and paid separately. |
| 55 | All as per item No 54 above but SPN 12 way |
| 56 | S&F in replacement of MCCB 160 Amps FP 415 volts, 3 Phase 50 Hz, Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed. |
| 57 | S&F in replacement of MCCB 125 Amps FP 415 volts, 3 Phase 50 Hz, Ics=100%Icu, breaking capacity 36 KA complete all as specified and directed. |
| 58 | S&F MCB SP 6 to 32 Amps 10KA, 240 volt 'B' series complete all as specified and directed. |
| 59 | S&F MCB SP 40 Amps 10KA, 240 volt 'B' series complete all as specified and directed. |
| 60 | S&F MCB SPN 40 to 63A Amps 10KA, 240 volt 'B' series complete all as specified and directed. |
| 61 | S&F MCB TPN 25 to 63 Amps 10KA, 240 volt, 50 Hz 'B' series complete all as specified and directed. |
| 62 | Supply and fixing 4 sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections all as required or directed. |
| 63 | Supply and fixing 6 sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections all as required or directed. |
| 64 | Supply and fixing 10 sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections all as required or directed. |
| 65 | Taking down carefully sub main wiring of any type and size including fittings and fixtures, removing materials from site complete all as directed. |
| 66 | M & L for in submain wiring with two run of 10.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 10.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuity conductor drawn through and under suitable size of rigid non metallic PVC conduit, medium grade, ISI marked (not less than 25 mm dia) complete with all accessories and fittings all laid/fixed concealed in wall and surface conduit on ceiling portion only complete all as specified.Note - 3 Runs of 10.0 Sqmm and one run of PVC conduit will be used as one unit for measurement purpose. |
| 67 | All as sper item No 66 above but for 6.0 Sqmm wire |
| 68 | All as per item No 66 above but for 4.0 sqmm wire |
| 69 | Supply installation commissioning testing of earthing in any kind of soil/strata complete with copper bonded earthing electrode chemical earthing system outer electrode dia 25 mm and 3 mtr long tightly filled with crystalline conductor mixture 250 microns copper coated along with bag of back bill compound 50 kg buried directly in the ground (earth pit not less than 2.25 meter deep below ground level) connected to and including galvanized iron strip 4 mm dia as earth lead by means of GI bolts,nuts,check nuts and washers and connecting earthing test point ,including CI covers ,frame and PCC (1:3:6) type C-2 using 20 mm graded stone aggergate as in earthing pit with CI cover and framing including necessary earth work etc complete all as specified .Note- PCC chamber shall be constructed at least one meter away from the building shall be provided in slanting manner.Note- PCC cover pit shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 kg (sqm in liew of CI) |
| 70 | Material and labour for galvanised iron strip 25 x 4 mm with saddles and fixing screws and connected as per site requirement complete all as specified and as directed. |
| 71 | All as per item No 70 but 4 mm dia GI wire |
| 72 | Taking down of light fittings of any wattage complete all as specified and directed |
| 73 | Supply and fixing wall mounted LED batten extruded aluminium heat shrink provide for efficient heat dissipation and integrated electronic driver, 20 watt LED fitting with 120 lumen/watt, 6000k, 230 volts, diffuser optics, etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed. |
| 74 | Supply and fixing wall mounted LED batten extruded aluminium heat shrink provide for efficient heat dissipation and integrated electronic driver, 20 watt LED fitting with 120 lumen/watt, 3000k, 230 volts, diffuser optics, etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed. |
| 75 | Supply and fixing wall mounted LED batten extruded aluminium heat shrink provide for efficient heat dissipation and integrated electronic driver, 10 watt LED fitting with 120 lumen/watt, 6000k, 230 volts, diffuser optics, etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed. |
| 76 | Supply and fixing wall mounted LED batten extruded aluminium heat shrink provide for efficient heat dissipation and integrated electronic driver, 10 watt LED fitting with 120 lumen/watt, 3000k, 230 volts, diffuser optics, etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and directed. |
| 77 | Supply and fixing wall mounted LED bulk head fittings, 10 watt, 230 volts, diffused optics etc complete with all accessoreis, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and as directed . Please Enable Macros to View BoQ information |
| 78 | Supply and fixing wall mounted LED bulk head fittings, 10 watt, 230 volts, diffused optics etc complete with all accessoreis, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting and testing complete all as specified and as directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender