Tender For Rewinding And Repairs To Submersible Openwell, Monoblock Motors And Openwell Motors At Ward No 1 To 14 In Karumath Atty Municipality
Tender Value
5 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
6 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rewinding And Repairs To Submersible Openwell, Monoblock Motors And Openwell Motors At Ward No 1 To 14 In Karumath Atty Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Rewinding charges for the following wet type submersible / Openwell/ Monoblock motors using suitable gauge PVC insulated electrolyte copper wire of suitable no. of turns including deduct the cost of scrap of old removing winding coil etc complete |
| 2 | 1 H.P. |
| 3 | 2 H.P. |
| 4 | 5 H.P. |
| 5 | 7.5 H.P. |
| 6 | 10 H.P |
| 7 | Supply and Replacing of following worn out parts in the wet type submersible / Openwell/ Monoblock motors with new one including cost of materials and labour. including deduct the old material cost |
| 8 | 10 H.P SubmersibleMotor/Openwell/ Monoblock |
| 9 | Bush Set |
| 10 | Housing Bush |
| 11 | Bearing Set |
| 12 | Soft sealing |
| 13 | Oil Sleeve |
| 14 | Thrust Bearing |
| 15 | Pump service - Submersible Motor/Openwell/Monoblock |
| 16 | Gun metal Bush |
| 17 | Bearing Set |
| 18 | Soft Sleeve |
| 19 | Pump Soft |
| 20 | Pump Sleeve |
| 21 | Impeller |
| 22 | Thrust bearing |
| 23 | Oil Sleeve |
| 24 | SS sleeve |
| 25 | Supply and Replacing of following worn out parts in the wet type submersible / Openwell/ Monoblock motors with new one including cost of materials and labour. including deduct the old material cost |
| 26 | 7.5 H.P SubmersibleMotor/Openwell/Monoblock |
| 27 | Bush Set |
| 28 | Housing Bush |
| 29 | Bearing Set |
| 30 | Oil seal |
| 31 | Soft sealing |
| 32 | Thrust Bearing |
| 33 | Pump service - Submersible Motor/Openwell |
| 34 | Gun metal Bush |
| 35 | Bearing Set |
| 36 | Soft Sleeve |
| 37 | Pump Soft |
| 38 | Pump Sleeve |
| 39 | Impeller |
| 40 | Oil Sleeve |
| 41 | Thrustbearing |
| 42 | SS sleeve |
| 43 | Supply and Replacing of following worn out parts in the wet type submersible motors /Open well/ Monoblock motors with new one including cost of materials and labour. including deduct the old material cost |
| 44 | 5 H.P SubmersibleMotor/Openwell/ Monoblock |
| 45 | Bush Set |
| 46 | Housing Bush |
| 47 | Bearing Set |
| 48 | Soft sealing |
| 49 | Oil Sleeve |
| 50 | Thrust Bearing |
| 51 | Pump service - Submersible Motor/Openwell/ Monoblock |
| 52 | Gun metal Bush |
| 53 | Bearing Set |
| 54 | Soft Sleeve |
| 55 | Pump Soft |
| 56 | Pump Sleeve |
| 57 | Impeller |
| 58 | Thrust bearing |
| 59 | Oil Sleeve |
| 60 | SS sleeve |
| 61 | Supply and deliver of following panel board parts newly to replace the worn out parts including deduct the old materials cost which were replaced |
| 62 | Preventor |
| 63 | Voltmeter/Ammeter |
| 64 | Indicator lamps |
| 65 | Bush button |
| 66 | Ammeter selector. |
| 67 | Conductor |
| 68 | Terminal |
| 69 | Overload relay |
| 70 | Labour charges for Removal of submersible pumpsets and its accessories from open well/ Borewell for attending repair works and Re-erection of submersible pumpsets and its accessoriel from open well/Borewell after attending the repairs, including fixing and jointing of submersible cable with clamps etc complete |
| 71 | Conveyance of power pumpset (centrifugual, jet and submersible) and its acessories from site of works to workshop for attending repair works, and then to work site Conveyance upto 10kms |
| 72 | Supply and replacing of followin water supply materials including deduct old materials |
| 73 | 32mm dia G.I., pipe B class (Medium) |
| 74 | 50mm dia G.I., pipe B class (Medium) |
| 75 | 40mm dia G.I., pipe B class (Medium) |
| 76 | 32 mm coupling (GI) |
| 77 | 50 mm Coupling (GI) |
| 78 | 40mm Coupling (GI) |
| 79 | 32 mm GI union |
| 80 | 50mm GI Union |
| 81 | 40mm Union |
| 82 | 32mm GI elbow |
| 83 | 2\\" Gate valve |
| 84 | 1 1/4\\" Gate valve |
| 85 | 1 1/2\\" gun metal valve |
| 86 | 50 mm GI Elbow |
| 87 | cables |
| 88 | 1.5sq mm submersible cables |
| 89 | 2.5sq mm submersible cables |
| 90 | 4 sq mm submersible cables |
| 91 | Supply and Replacing of following wornout Elecrtical meterials with new one including cost of materials and labour including deduct the old material cost |
| 92 | 7/20 Copper wire |
| 93 | 32 A Fuse unit |
| 94 | 63 A fuse unit |
| 95 | 100 A fuse unit |
| 96 | 16A main switch |
| 97 | 63A MCB |
| 98 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender