Tender For Recovery And Reconstruction Of Dws Scheme For Pokhariabong Bhanutoll Pokhariabong Sangeytar Pokhariabong Bazar Pokhariabong Bazar Phase I Phase Ii Phase Iii Phase Iv And Phase V
Tender Value
15.32 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
3 days left
EMD
30700
Bank guarantee accepted
Document Fee
5005
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Recovery And Reconstruction Of Dws Scheme For Pokhariabong Bhanutoll Pokhariabong Sangeytar Pokhariabong Bazar Pokhariabong Bazar Phase I Phase Ii Phase Iii Phase Iv And Phase V
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Sep-2026 | TENDER FEES | Fee | 06-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Clearing compound premises of shurbs, plants, jungles etc. By cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). |
| 2 | Earthwork in excavation of foundation trenches of drains an all sorts of soils ( including mixed soils but excluding laterite or sand stone ) including removing, spreading or stacking the spoils within a lead of 75 mtr. as directed.item includes neccessary triming the side of trenches levelling dressing and ramming the bottom bailing out as required complete depth of excavation not exceeding 1.50 mtr. |
| 3 | Earthwork in filling in foundation trenches or plinth with good earth in layers not exceeding 15 cm including watering and ramming etc. layer by layer complete. ( Payment to be made on the basis of mesurement of finished quantity of work) |
| 4 | Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics without rolling but including ramming and preparing the bed to proper level and filling up all joints with sandy clay or earth. N.B |
| 5 | Supply of stone boulder (N.B. variety) of approved quarries above 150 mm to 200 mm dia size. |
| 6 | Cement concrete with graded stone ballast (40 mm size, excluding shuttering ) ( 1:3:6)-( N.B. Variety Stone Metal) |
| 7 | Cement concrete (1:1.5:3) with 20mm down graded stone chips excluding shuttering with N.B.Variety River bazree. |
| 8 | Reinforcement ( for RCC works) in all sorts of structure including distribution bars,stirrups,binders etc. including supply of bars,initial straightening and removal of loose rust if necessary cutting to requisite length hooking & bending to corrrect shape placing in proper position and binding with 16 swg black annealed wire at every intersection complete as per drawing & direction. (a)(i) Tor steel/ Mild steel( Other than SAIM/Tata/RINL) |
| 9 | Hire & Labour charges for shuttering with centering and necessary staging upto 4 mtr. Using approved stouts props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns,lintels including fitting fixing and striking out after completion of work(25 mm to 30 mm thick wooden shutttering as directed) a) 25mm to 30mm thick wooden shuttering as per decision & direction of ECI |
| 10 | Plum concrete work with cement concrete with 30mm down graded stone metal 40% and stone boulder size 150mm and above placed in as directed, excluding shuttering if any (1:3:6). |
| 11 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor).[Excluding cost of chipping over concrete surface]. 1:4 cement mortar 20mm thick plaster |
| 12 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).50mm dia |
| 13 | 25mm dia |
| 14 | 80mm diaSupplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.50MM DIA |
| 15 | 25mm dia |
| 16 | GST 18% |
| 17 | Labour Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender