Tender For Special Repairs To Building No P-324/1-6 (Or Md Accn) Of Mh At Rwa Eme Zone At Kalimpong Mil Stn Under Ge 867 Ews
Tender Value
58.17 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
19 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gangtok → sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Building No P-324/1-6 (Or Md Accn) Of Mh At Rwa Eme Zone At Kalimpong Mil Stn Under Ge 867 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified . |
| 4 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 5 | S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equvalent as approved by GE) complete all as specified and directed. |
| 6 | Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) including dismantling of PCC bed blocks for hold fasts complete all as specified and directed. |
| 7 | Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) including dismantling of PCC bed blocks for hold fasts complete all as specified and directed. |
| 8 | Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed. |
| 9 | S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and directed. |
| 10 | S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified. |
| 11 | S&F pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified. |
| 12 | M & L for providing PCC (1:3:6) type C1 using 20mm graded aggregate as in hold fast/chajja coping all as specified and directed. |
| 13 | S&F 35 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed. |
| 14 | S&F 35 mm thick second class hard wood, glazed and Skelton, open rebated and prepared to receive glass/wire cloth, gauze exc ( With sash bars any number) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire mesh) etc. fitted to chowkhats complete all as specified and directed .(Note: wire cloth will be measured and paid separately). |
| 15 | S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing given in clause 8.B.3 of SSR -2010 (Part-II Rates) complete all as specified and directed. |
| 16 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification |
| 17 | S & F anodised aluminium frame with power coating (minimum thickness of power coating 50 Micron) for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 18 | S & F anodised aluminium window and ventilator shutters,powder coating of any colour (Thickness or powder coating not less than 50 micron). fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 19 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening and weight not less than 3.4 kg/Sqm, all complete as per requirement and direction of Engineerin-charge. |
| 20 | S&F 100 mm size stainless steel butt hinges, complete all as specified and directed |
| 21 | S&F 100 mm size butt hinges, medium weight , cold rolled, mild steel and fixed in repair complete all as specified and directed |
| 22 | Aluminium anodised, barrel tower bolts of extruded section 100mm long and fixed with screws complete all as spd. |
| 23 | Aluminium anodised, barrel tower bolts of extruded section 200mm long and fixed with screws complete all as spd. |
| 24 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long and fixed with screws complete all as spd. |
| 25 | S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as spd |
| 26 | S&F of 250 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 27 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 28 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones |
| 29 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed. |
| 30 | S&F 4 mm thick frosted/ pin head glass in ventilator shutters all as specified and directed. |
| 31 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed. |
| 32 | M & L 40mm thick,cement concrete type B-1 (1:2:4) 20mm graded aggregate as in floor making finished even and smooth using extra cement complete all as specified and directed. |
| 33 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 34 | Demolition of reinforced concrete of any description and in any position all as specified and directed. |
| 35 | M&L for reinforced cement concrete type B1 1:2:4 ( using 20mm graded aggregate) as in cooking slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as spd & directed |
| 36 | S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 37 | Formwork to soffits of suspended slabs such as cooking slab and similar work, exceeding 200mm thick (Horizontal or slopping ) all as directed. |
| 38 | M&L for PCC 1:2:4 (using 12.5mm graded aggregate) in roof kerbs, rounded and chamfered or hunching in chajjas to prevent water seepage into brick wall, including necessary formwork and scafolding upto a height of 8mtr including demolition of existing PCC all as specified and directed. |
| 39 | M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed. |
| 40 | M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 41 | Cleaning of vegetation/roots from roof slab, wall, chajja etc and digging out roots etc and filling holes and finish the surfaces with cement mortar (1:3) complete all as specified and directed. |
| 42 | Demolition of brick work or stone/boulder masonary, built in cement mortar including all quions, arches, pillars etc, but excluding ashler facings, dressed stone work and precast concrete articles all as directed. |
| 43 | M&L for brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 having compressive strength not less than 75kg/Sqcm all as specified and directed. |
| 44 | M & L for old size subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in Cement mortar (1:4) having compressive strength not less than 75kg/Sqcm all as specifed and directed. |
| 45 | Dismantling wrought iron or mild steel work of any description as in door, gates, etc and similar works complete all as directed. |
| 46 | Refixing only steel truss, rafter and purlin of different size bend to shape, cut to length etc, including necessary welding, special shape washer as directed by Engr in Charge |
| 47 | S&F steel truss, rafter and purlin of different size bend to shape, cut to length etc, including necessary welding, special shape washer as directed by Engr in Charge |
| 48 | Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 49 | M&L for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair all as specified and directed. |
| 50 | M&L for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified and directed. |
| 51 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling /chajja and RCC surfaces, finished fair and even without using extra cement complete all as specified and directed. |
| 52 | M&L for ceiling and applying three coats of white wash on ceiling including preparation of new or previously untreated surfaces complete all as specified and directed. |
| 53 | M&L for preparation of new plastered surfaces of wall applying two coats of cement base paint complete all as specified and directed. |
| 54 | M&L for preparation of newly plastered wall surfaces over 10 CM width or girth applying two coats of Acrylic washable distemper over a coat of primer and 1mm thick wall care putty complete all as spd & directed. |
| 55 | M&L preparation existing treatment on walls and applying one coat of cement base paint all as spd & directed. |
| 56 | M&L for complete removal of existing wall surfaces over 10 CM width or girth applying two coats of Acrylic washable distemper over a coat of primer and 1mm thick wall care putty complete all as spd & directed. |
| 57 | M&L for complete removal of existing treatment surfaces of ceiling and applying two coats of white wash on ceiling including complete all as specified and directed. |
| 58 | M&L for complete removal of existing wall surfaces over 10 CM width or girth applying three coats of white wash complete all as spd & directed. |
| 59 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed. |
| 60 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 61 | All as per item No 60 but in skirting/dado over 10mm thick backing plaster in cement morter 1:4 complete all as specified and directed. |
| 62 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 63 | M&L Glazed ceramic coloured tiles size 450X 300X 7 to 8mm thick in skirting, dado etc, set and jointed in neat cement slurry and pointed in epoxy joints filler to match over 10mm screeding in CM 1:4 complete all as specified and directed. |
| 64 | M&L for coloured & polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry as in floors including 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engr - in - Charge. |
| 65 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 66 | M & L Granite (of any type) work 20MM thick machine cut, bedded and jointed with grey cement slurry and pointed with epoxy joints with admixture of pigment to match with shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:4 over cooking platform all as specified and directed by Engr - in - Charge. |
| 67 | M & L Granite (of any type) work 20MM thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with epoxy joints filler with admixture of pigment to match with shade of granite stone including grinding and polishing complete over 10mm thick rendering in CM 1:4 all as specified and directed by Engr - in - Charge. |
| 68 | Supply and laying of for 20 mm outer dia CPVC pipes SDR 11 fittings in trenches /floors complete all as specified and directed. |
| 69 | Supplying and laying of 20mm outer diameter CPVC Brass Elbow tubes medium grade fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 70 | Supplying and fixing brass Elbow ( 3/4 x 1/2) as directed and specified |
| 71 | cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement morter 1:3 and filling the grove with cement morter 1:3 after tucking the felt and finishing/making good distrubed surfaces as required complete all as spd and directed. |
| 72 | S&F for pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 73 | S&F 15 mm bore bib taps, cast copper alloy chromium plated fancy type with crutch or butter fly handle, screwed down,screwed for iron pipe or for brass ferrule all as specified and directed by Engr-in-Charge. |
| 74 | Supply and fix, as in repair stop valve cast copper allow, fance type, chromic plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for union s all as specifies and direction |
| 75 | Supply and fix, stop valve/angle valve cast copper alloy, fancy type, chromium plated with screwed down high pressure, with crutch or butterfly handlesa for 15 mm bore pipe or for unions all as spd and directed. |
| 76 | S& F in reipair waste couplig of PTMT 32mm dia (half or full threaded). (minimum weight 32mm, 45 gms/40mm,60gms) complete all as specified and directed. |
| 77 | S& F in repair waste couplig of PTMT 40mm dia (half or full threaded). (minimum weight 32mm, 45 gms/40mm,60gms) complete all as specified and directed. |
| 78 | S&F as in repairs 75/110 mm dia of outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 79 | supply & fix in repair stainless stell curtain rod 25mm dia and heavy bracket curtain rod with two Nos of fancy type end knob complete for doors/window opening all as specifies and direction |
| 80 | S&F in repair water closet (squatt pattern) of vitreous china squatting pan \\"ORRISA\\" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syponic pipe ect complete including trap set in and including necessary lean cement concrete complete all specified and direction |
| 81 | M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 82 | M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 83 | M&L for applying for preparation of old painted steel surfaces and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 84 | M&L applying one coat of preparation of synthetic enamel paint on wooden surfaces of any description over 10 cm width or girth including of old painted wooden surfaces complete all as specified and directed. |
| 85 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 86 | S&F in repairs vitreous china wash basin white of any pattern, flat back of size 4550x400 mm (excluding taps), waste, chain and plug including waste pipe ,suitable size of brackets and making good the damaged walls as per existing wall finish complete all as specified and directed |
| 87 | S&F in repairs stainless steel grating/square cockroach proof with or without hole 100/75 dia all as specified and directed |
| 88 | S&F as in repair bibtap standard of PTMT any colour screwed for iron pipe 15mm bore (minimum weight 90 gms) all as specified and directed. |
| 89 | S&F in repair Brass chromium plated shower rose with or without swivel joints 125 mm size , including fixing to steel pipe or unioncomplete all as specified and directed. |
| 90 | S&F in repairs Health faucet(ABC Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABC wall hook including making connections and fixed in position complete all as spd. |
| 91 | S&F in repair PVC high level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle white etc 32 mm dia bore PVC flush pipe including brackets and jointing with water closet of any type all as specified and directed. |
| 92 | S&F in repairs 600X450 mm bevelled edge mirror of selected quality glass, of any size mounting on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers, with and including aluminium edging around of mirror complete all as specified and directed |
| 93 | S&F in repairs of 1mm thick stainless steel sink with drainage board kitchen or laboratory type with waste pipe, plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size of sink 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 94 | S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed. |
| 95 | Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/100/110 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed. |
| 96 | S&F in repair 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed. |
| 97 | S&F in repair 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed. |
| 98 | fixing only, 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed. |
| 99 | fixing only, 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed. |
| 100 | S&F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 101 | S&F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 102 | S&F of 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement complete all as specified and directed. |
| 103 | S&F of 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement complete all as specified and directed. |
| 104 | S&F PVC cowls 110 mm bore all as specified and directed |
| 105 | M&L for 32 mm low density poly ethylene pipes (LDPE) of pressure rating 6 kg/cm |
| 106 | S&F brass chromium plated tubular towel rail of 20 mm dia D' type 60cm long between flanges complete all as specified and directed. |
| 107 | S&F Soap dish, any type fixed to plugs with chromium plated brass screws complete all as specified and directed |
| 108 | M&L for machine cut Kota stone for steps in single piece (riser & treads) 20-25mm thick over cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete finished even and rough all as specified and directed. |
| 109 | M&L for machine cut Kota stone slab in single piece as in vertical surfaces such as riser of steps,dado/skirting, 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 10 mm thick rendering in CM 1:4 finished even and rough all as specified and directed. |
| 110 | M&L in repair for 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed. |
| 111 | M&L in repair for 12 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed. |
| 112 | Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 113 | Taking up or down 20 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 114 | S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor including taking down complete all as specified and directed, |
| 115 | S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor including taking down complete all as specified and directed, |
| 116 | S&F in repair Brass chromium plated shower rose 125 mm dia with revolving joints and fixed to 15 mm GI pipe or union all as specified and directed. |
| 117 | S&F of 100 mm size haps and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 118 | S&F of continuous (piano) hinges mild steel bright finish or electro galvanised 30 mm width of flaps complete all as specified and directed. |
| 119 | S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed. |
| 120 | M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 121 | Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed. |
| 122 | S&F kitchen plate rack made out of stainless steel 0.50 mm thick sheet with partitions and size of rack 800 x 250 x900 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed. |
| 123 | Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 140 mm complete all as specified and directed |
| 124 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed. |
| 125 | Dismantling and taking down unserviceable main switches, DBs etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed. |
| 126 | M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked concealed in wall/fixed to roof,ceiling etc incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall with modular back plate and top cover for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc for one light/Bell/Exhaust fan point controlled by one, one way switch 5/6 Amps. complete all as specified & as directed. |
| 127 | Description all as per item No 126.00 here in before but for one light piont control by teo 2-way switch with cable 1.5 sqmm sixe FRLSH cable complete all as specified & as directed. |
| 128 | Description all as per item No 126.00 here in before but for one 3 point 5/6 Amps switch socket outlet point controlled by one switch on the same board. |
| 129 | Description all as per item No 126.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent boad. |
| 130 | All as per item No 126.00 here in before, but for one 15/16 Amp switch socket outlet on indefendent board wired 2.5 Sqmm PVC unsheathed, multi-dtanderted copper conductor cable along eith 2.5 Sqmm PVC insulated multi standed copper conductor cable as earth continuity conductor (green colour) complete all as specified and diercted by Engr-in-Charge. |
| 131 | Supply and fix Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 132 | M&L for modular switch two way 6 Amps, 1 module, 240 Volts, all as specified and directed. |
| 133 | Supply and fix Modular switch 1 way 16 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 134 | M&L for modular bell push 6 Amps 1 module, 240 Volts, all as specified and directed. |
| 135 | M&L for Buzzer, Ding Dong AC. 230 volts, single pole, all as specified and directed. |
| 136 | M&L for modular socket, 6 Amps - 2/3 pin combined 2 module, 240 Volts, all as specified and directed. |
| 137 | S&F modular socket outlet, 6 or 5 pin & 15 Amps, flush type, ISI marked all as specified and as directed |
| 138 | M&L for ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, three terminal, 240 Volts, all as specified and directed. |
| 139 | Supply and fixing Modular angle holder insulated body with back plate for batten fitting all as specified and as directed. |
| 140 | upply and fixing 10W/9W LED retro fit B-22 holder base with poly carbonate body and aluminium heat shrink Invertor lamp, complete all as specified and directed. |
| 141 | Supply and fixing LED batten surface / wall mounted with extruded box type housing high optically effcient polycarbonate diffuser, in bilt electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per IEC standard all as per specified and directed. |
| 142 | Supply and fixing LED batten surface / wall mounted with extruded box type housing high optically effcient polycarbonate diffuser, in bilt electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K CCT, surge protection 2.5 KV, 50,000 burning hrs at L70 criteria and orepation voltage range of 150-270 V AC, complete all as specified and directed. |
| 143 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, including lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 144 | S & F LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable fitting complete all as specified and as directed. |
| 145 | Supply and fixing Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed. |
| 146 | Taking down carefully sub main wiring of any size/core/type including conduit/ cashing/ batten of any type and making good disturbed surfaces to match with the existing surface roof/ wall/ floor, complete all as specified and directed. |
| 147 | M&L for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall/roof including taking down of old unservicible sub main wiring complete all as specified and directed.(Note three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length) complete all as specified and directed by Engr-in-charge. |
| 148 | S&F TPN DB with suitable for TPN MCB incomer, double door (IP-54), 4 Ways, built- in 200 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, concealed in wall complete all as specified and as directed. |
| 149 | Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC, concealed in wall complete all as specified and as directed. |
| 150 | upply and fixing in of miniature circuit breaker (MCB) of four poles (4P), current carrying capacity 40-63 Amps with breaking capacity 10KA 'C' curve, 240 volt in TPN DB conmple with connections, testing and commissioning complete all as specified and directed. |
| 151 | Supply and fixing in of miniature circuit breaker (MCB) of four poles (4P), current carrying capacity 20-32 Amps with breaking capacity 10KA 'C' curve, 240 volt in TPN DB conmple with connections, testing and commissioning complete all as specified and directed. |
| 152 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 6 to 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 153 | S & F of PCV type MCB protected socket comprising PVC insulated enclosure with inbuilt plug top and socket complete with 01 No SP MCB of 20/25 Amp C curve sutable for 220-240 Volts AC supply including making necessary electrical connections testing and commissoning complete all as specified and directed. Please Enable Macros to View BoQ information |
| 154 | S & F of PCV type MCB protected socket comprising PVC insulated enclosure with inbuilt plug top and socket complete with 01 No SP MCB of 20/25 Amp C curve sutable for 220-240 Volts AC supply including making necessary electrical connections testing and commissoning complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender