Tender For Providing Of Toilet Block At Various Locations In 4 Garh Rif Under Ge (East) Lucknow
Tender Value
28.31 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
9 days left
EMD
56620
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Toilet Block At Various Locations In 4 Garh Rif Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts, laying of cable etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 2 | M & L for hard core free from dust and vegetation of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed. |
| 3 | M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for earth filling (approved earth brought from out of defence land), spreading, leveling & compecting n exc. 30 cm thick in Layers, watering, well ramming/rolling and finishing to required size, shape,etc.n exc. 1.5m high from base complete all as specified and directed.Note : Mixing of approved earth filling and excavated soil shall not be allowed. Payment shall be made of compacted earth with 90% compaction |
| 5 | M & L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed. |
| 6 | M & L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 7 | M & L for rendering 15mm thick on fair faces of brick work in CM1:4, finished even and smooth without using extra cement complete all as specified and directed |
| 8 | M & L for rendering 15mm thick on other than fair faces of brick work in CM1:6, finished even and smooth without using extra cement complete all as specified and directed |
| 9 | M & L for rendering 10 mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M & L for 5mm thick rendering in cement mortar in CM (1:4) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M & L for RCC 1:1½ :3 type A1 using 20 mm graded crushed stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed. |
| 12 | M & L for RCC 1:1½ :3 type A1using 20 mm graded crushed stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed. |
| 13 | M & L for RCC type B-1 (1:2:4) using 20 mm graded crushed stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed. |
| 14 | M & L for RCC type B-1 (1:2:4) using 20 mm graded crushed stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed. |
| 15 | M & L for providing 75mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade crushed stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed. |
| 16 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 17 | M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 18 | M & L for mild steel TMT bars 6 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 19 | M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed. |
| 20 | M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. |
| 21 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed. |
| 22 | M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed. |
| 23 | M & L for Non-skid ceramic coloured tiles jointless premium quality 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 24 | M & L for Glazed ceramic tiles (coloured) premium quality jointless in vertical surfaces 600x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 25 | M & L for 18 to 20mm thick granite (of any type or any shade) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over and including 15mm thick screed bed in CM (1:6) including rounding of edges of stone slabs one edge smooth round with polishing to match the finish of granite at top such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 26 | S & F of rolled mild steel work as in door frame (chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 (Gde 165-E) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 27 | S & F 2nd class HW, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, fitted with cut and mitred beads for securing glass etc, sizes of members shutters as specified in SSR Part I, section 8, clause 8.24(a) and fitted to chowkhats complete all as specified and directed. |
| 28 | S & F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification complete all as specified and directed. |
| 29 | S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing in SSR (Part -II) 2010 complete all as specified and directed. |
| 30 | S&F steel window / ventilator glazed and gauged (combination) with side hung / top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars and necessary cooler arrangement in window complete all as specified and directed. |
| 31 | S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed. |
| 32 | S & F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 33 | S & F 100mm butt hinges stainless steel with galvanised mild steel hinge pin anodised ISI marked and fixed, complete all as specified and directed. |
| 34 | S & F 150mm long aluminium anodised barrel tower bolts of extruded section all as specified and directed. |
| 35 | S & F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 36 | S & F 15mm GI water tubing (Concealed type), medium grade, galvanised with all fittings (and fixed to walls, ceiling or laid in floors/ trenches) complete all as specified and directed. |
| 37 | S & F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 38 | S & F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 39 | S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed |
| 40 | S & F tubular towel rail, chromium plated brass 20mm dia 'D\\" type 60cm long between flanges complete all as specified and directed. |
| 41 | S & F brass chromium plated shower rose of 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed. |
| 42 | S & F PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 43 | S & F wash hand basins vitreous china, coloured flat back size 550 x 400mm fixed including bracket complete all as specified and directed. |
| 44 | S & F vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed |
| 45 | S & F CP grating doom 100 mm dia chromium plated complete all as specified and directed. |
| 46 | S & F cast copper alloy health faucet chromium plated with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed. |
| 47 | S & F CP brass jet spray with hand hold arrangement including 1.5 m long flexible pipe with hook of superior quality complete all as specified and directed |
| 48 | S & F glass corner self assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets complete all as specified and directed. |
| 49 | S & F plastic water closet seat cover white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete all as specified and directed. |
| 50 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 51 | M & L for providing plain cement concrete type B-0, 1:2:4, (using 12.5 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 52 | Supply and fixing 15mm bore brass CP mixer valve wash basin for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 53 | S & F 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 54 | S & F angle valves 15mm bore, cast copper alloy chromium plated with long sunk and cap (Concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 55 | S & F PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 56 | S & F vitreous China \\"Orissa pattern\\" size 580 x 440mm\\" coloured, with intergral foot rests with vitreous china 'P' or 'S' trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed. |
| 57 | S & F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including new clamps complete all as specified and directed. |
| 58 | S & F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including new lamps complete all as specified and directed. |
| 59 | S & F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 60 | S & F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 61 | S & F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 62 | S & F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 63 | S & F PVC (SWR) floor trap 110/75mm, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 64 | S & F PVC (SWR) reducers 75/110mm bore complete all as specified and directed. |
| 65 | S & F Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed |
| 66 | S & F 32mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed. |
| 67 | S & F plastic water closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 68 | M & L for brushing neat cement slurry at the rate of 3 Kg per Sqm complete all as specified and directed. |
| 69 | M & L for providing plain cement concrete, type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges with and including necessary form work as required complete all as specified and directed. |
| 70 | M & L for providing roof/sunken treatment with polymeric water proofing membreane with certain specification given below as under complete all as specified & directed(a) M&L plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement.(b) Applying a coat of bitumenous primer @ 0.50 LTRs /Sqm and allow to dry(c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (e) applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm.(f) Applying two coat of Aluminum paint including prepation of roof surface as diretcted. |
| 71 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. |
| 72 | Removing surplus excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 73 | M & L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 74 | M & L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 75 | M & L for preparation of newly plastered wall surfces and applying three coats of white wash complete all as specified and directed. |
| 76 | M & L for preparation of newly plastered surfaces of walls and finishing premium weather proof acrylic smooth exterior paint with Silicone additives of required shade in two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over and including a coat of 1mm thcik wall care putty complete all as specified & as directed. |
| 77 | M & L for preparation newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed. |
| 78 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 79 | M & L for hard core free from dust and vegetation of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 80 | Supply and filling of sand under paver blocks or floors including watering and consolidation as required complete all as specified and directed. |
| 81 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade With Grey cement and pigment complete all as specified and directed. |
| 82 | M & L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 83 | M & L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 100 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 84 | Supply, laying and fixing of DWC (Double Wall Corrugated) Sewerage HDPE Pipes as per relevent IS: 16098-2013 of Size 100 mm internal dia laid in trenches and jointed and tested as per manufacturer instruction complete all as specified and directed. |
| 85 | Supply, laying and fixing of DWC (Double Wall Corrugated) Sewerage HDPE Pipes as per relevent IS: 16098-2013 of Size 150 mm internal dia laid in trenches and jointed and tested as per manufacturer instruction complete all as specified and directed. |
| 86 | M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement mixed with intergral water proofing compound @ 2% by weight of cement complete all as specified and as directed.Note : WPC measured and paid separately |
| 87 | Supply only integral water proofing compound complete all as specified and as directed. |
| 88 | M & L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed. |
| 89 | M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 90 | M & L for provision of hume pipe Septic tank for 100 users, excavation in soft / loose soil, foundation in PCC 1:2:4 including RCC precast manhole covers having 6mm plate embedded all around /fiber reinforced cover including returning filling and removal of surplus earth complete all as specified and directed.Note : Cost of excavation & other earth work including connection to sewage pipe line shall be deemed inclusive in quoted unit rate. |
| 91 | M & L for provision soakage well, excavation in any type of soil, foundation in PCC 1:3:6, well wall shall be constrcuted in honey combed bricks work in CM (1:4), RCC Cover slab Filling with bricks bats, complete of size 2.40M dia x 3.00M deep complete all as specified and directed. Note : Cost of excavation & other earth work including connection to sewage pipe line shall be deemed inclusive in quoted unit rate. |
| 92 | M&L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 1.5 sqmm including PVC insulated FRLS copper earth continuity conductor 1.5 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour of size not less than 25 mm dia with all necessary conduit fittings and accessories such as bends, tees, couplers, junction boxes etc including concealed sunken modular GI metal boxes of minimum 1.0 mm thickness with modular mounting cover plates and frames of approved colour, suitable for mounting modular switches, sockets, regulators, etc complete all as specified and directed for the following:– One light point controlled by one switch. |
| 93 | All as per item No above 92 One fan point controlled by one switch. |
| 94 | All as per item No above 92 One socket outlet 6 Amp controlled by one switch on the same board with other switches. |
| 95 | All as per item No above 92 One socket outlet 6 Amp controlled by one switch on indepdendent board. |
| 96 | M & L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 2.5 sqmm, including PVC insulated FRLS copper earth continuity conductor 2.5 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour, of size not less than 25 mm dia, with all necessary conduit fittings and fixing accessories, including sunken GI metal box of minimum 1.0 mm thickness with modular mounting cover plate and frame of approved colour, suitable for mounting modular accessories, complete for one 6A or 16 A socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 97 | M & L for point wiring with 1100 Volts grade PVC insulated FRLS multi-stranded copper conductor cable 4 sqmm, including PVC insulated FRLS copper earth continuity conductor 4 sqmm, colour-coded as per IS, drawn through and including concealed rigid non-metallic PVC conduit, medium grade, ISI marked, ivory colour, of size not less than 25 mm dia, with all necessary conduit fittings and fixing accessories complete for one 16A/20A socket outlet point controlled by one module MCB on independent board complete all as specified and directed. |
| 98 | S & F modular angle lamp holder of approved make with insulated polycarbonate body with modular frame including necessary fixing accessories and electrical connections complete all as specified and directed. |
| 99 | S&F modular one-way switch, 6 Amp, 1-module size of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 100 | S&F modular one-way switch, 16 Amp, 1-module size, of approved make, with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 101 | S&F modular socket outlet, 6 Amp, 2/3 pin combined, 2-module size, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 102 | S&F modular socket outlet, 6/16 Amp, 2/3 pin combined, 2-module size, of approved make with all necessary fixing accessories and electrical connections complete all as specified and directed. |
| 103 | S & F MCCB, four-pole, 125 Amp, with minimum breaking capacity 16 kA (Icu = Ics), thermally adjustable type with thermal overload setting range from 70% to 100% of rated current, and fixed magnetic short-circuit protection, with spreader links (set of four) for cable connections, suitable cable lugs, nuts, bolts and washers including making all electrical connections complete all as specified and directed. |
| 104 | S&F of MCB Distribution Board, SPN, 240 volts, 8 ways, factory-assembled type, fabricated from powder-coated CRCA steel sheet, recess-mounted, complete with reversible double door, having a minimum degree of protection IP-43 and mechanical impact resistance IK-09, conforming to IS 61439 (Low-voltage switchgear and controlgear assemblies), provided with insulated tinned copper busbar of 100 Amp rating, separate neutral busbar and earth busbar, DIN rail, detachable gland plate, complete with all internal interconnections, earthing connections, and blanking plates for all unused ways/spaces complete all as specified and directed. Note: MCCBs, MCBs and MCB Distribution Boards (DBs) shall be of the same make to ensure proper coordination, compatibility and compliance with applicable IEC standards. Mixing of makes shall not be permitted. |
| 105 | S & F ceiling rose 3-plate type, with insulated polycarbonate body, of approved make with all necessary fixing accessories and electrical connectionscomplete all as specified and directed. |
| 106 | M & L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable using colour coding drawing into and including concealed rigid non metallic PVC conduit 25 mm dia, medium grade, ISI marked ivory colour along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth wire complete all as specified and directed. Note : (i) Cost of cutting & chasing for concealltion of conduit and making good as existing to distrubed surface shall be deemed inclusive in quoted unit rate. (ii) Three runs of 6 sqmm copper conductor and 01 run of PVC conduit shall be measured as one unit. |
| 107 | Supply and fix of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. |
| 108 | Supply and fix of MCB, SPN, AC, 240 volt of 32 Amp capacity \\"C\\" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. |
| 109 | S & F GI pipe bracket, 32 mm dia, light grade, 1.2 m long, bent to shape for security light fitting including 2 Nos MS clamps with nuts, bolts & washers and painting of clamps with aluminium paint over one coat of red oxide primer complete all as specified & directed. |
| 110 | S&F LED security light fixture 25 to 35 Watt with powder-coated pressure die-cast aluminium body complete with electronic driver suitable for input voltage 140–270 Volts AC, 50 Hz, operating temperature –15°C to +50°C, provided with internal surge protection minimum 5 kV (L–N–E) as per IEC 61000-4-5, driver efficiency >85%, THD <10% as per IEC 61000-3-2, power factor ≥0.95, IP-66 protection and IK-10 impact resistance, CRI >80, system lumen efficacy ≥105 and <120 lm/W, with under-voltage and over-voltage protection, EMI/EMC compliance as per CISPR-15, and optical lenses for beam angle as per IESNA Type I / II / III, as required. The luminaire shall have minimum rated life of 50000 burning hours for LED with 70% lumen maintenance at end of life supported by LM-80 extrapolation and IES TM-21-11 report, CCT 5700K / 6000K / 6500K (ANSI bin), SDCM <5, and maximum power consumption not exceeding rated wattage. The fixture shall conform to relevant BIS standard and shall include all accessories, fixing arrangements, internal wiring with suitable size FRLS PVC insulated copper conductor cable complete all as specified & directed. |
| 111 | S&F LED surface-mounted batten light fitting, 20 Watt, with powder-coated die-cast/extruded aluminium or CRCA sheet phosphated and powder coated body, construction conforming to IS:10322 (Part-1) / IEC 60598-1 with replaceable high-efficiency electronic driver (driver efficiency ≥85%), system lumen efficacy ≥120 lm/W, suitable for AC 140–270 Volts, 50 Hz, operating temperature –15°C to +40°C. The luminaire shall be provided with internal surge protection minimum 2.5 kV, short-circuit and open-circuit protection, THD <10%, power factor ≥0.95, IP-20 protection, CRI >80, and flicker ≤5%. The LED shall have a minimum rated life of 50000 burning hours with 70% lumen maintenance at end of life. The CCT shall be 5700K / 6000K / 6500K (ANSI bin) with SDCM <3, and maximum power consumption shall not exceed the rated wattage. The luminaire shall conform to relevant BIS standards and bear a valid BIS Trade Mark Certificate (TC). Manufacturer’s name/word mark shall be engraved / embossed / screen-printed on the housing. The item includes internal wiring with suitable size FRLS PVC insulated copper conductor cable, all connections, earthing, fixing accessories, and is complete in all respects complete all as specified & directed. |
| 112 | S&F LED surface-mounted batten light fitting, 9/10 Watt with powder-coated die-cast/extruded aluminium or CRCA sheet phosphated and powder coated body, construction conforming to IS:10322 (Part-1) / IEC 60598-1 complete with high-efficiency electronic driver (driver efficiency >85%), system lumen efficacy ≥120 lm/W, suitable for AC 140–270 Volts, 50 Hz, and operating temperature –15°C to +40°C. The luminaire shall be provided with internal surge protection minimum 2.5 kV, short-circuit and open-circuit protection, THD <10%, power factor ≥0.95, IP-20 protection, CRI >80, and flicker-free operation (flicker ≤5%). The LED shall have a minimum rated life of 50000 burning hours with 70% lumen maintenance at end of life. The CCT shall be 5700K / 6000K / 6500K (ANSI bin) with SDCM <3, and maximum power consumption shall not exceed the rated wattage. The luminaire shall conform to relevant BIS standards and bear a valid BIS Trade Mark Certificate (TC). Manufacturer’s name/word mark shall be engraved / embossed / screen-printed on the housing. The item includes internal wiring with suitable size FRLS PVC insulated copper conductor cables, all connections complete all as specified & directed. |
| 113 | S&F of surface-mounted LED bulkhead luminaire 10 W with pressure die-cast aluminium housing finished with polyester powder coating, opal polycarbonate diffuser, minimum system efficacy ≥100 lm/W, integral electronic driver with PF ≥0.9 and THD ≤10%, CCT 6500 K, CRI ≥80, minimum Ingress Protection IP65, minimum Impact Resistance IK08, rated life ≥50000 hours @ L70, suitable for operation on 160–270 V AC, 50 Hz complete with 0.75 sqmm factory pre-wired PVC sheathed, three-core flexible multi-stranded copper conductor cable connection including all fixing arrangements and minimum 5-year OEM warranty. LM-79 (luminaire) and LM-80 (LED source) test reports from NABL-accredited lab as mandated under BIS for LED luminaires shall be complete all as specified & directed. |
| 114 | M&L for earthing with galvanised steel earth plate electrode of size 600 mm × 600 mm × 6 mm thick, buried directly in ground with earth pit not less than 2.25 metres deep below normal ground level, with top edge of earth plate not less than 1.5 metres below normal ground level, connected to galvanised steel earth lead wire 4 mm dia by means of galvanised steel bolts, nuts, check nuts and washers, all as shown on Electrical Plate No. 3 of MES SSR Part-I (2009), including 15 mm bore light grade GI protection pipe for earth lead up to 7.5 metres beyond the outer edge of earth pit, PCC chamber in cement concrete 1:3:6 type C-1, with RCC cover slab in cement concrete 1:2:4 type B-1, 40 mm thick, reinforced with 6 mm dia MS bars, 3 Nos each way, provided with lifting handle made out of 6 mm dia MS bar, watering arrangement consisting of funnel with wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling including necessary excavation, earth work, and testing on completion complete.Note : (a) Cost of excavation & other earth work shall be deemed inclusive in quoted unit rate.(b) Earth wire upto 7.5 RM from test point shall be deemed inclusive in quoted unit rate. |
| 115 | S & F Fresh air fan of size 250 mm sweep PVC body complete with louvers connection up incl suitable size three core flexiable copper cable from ceiling rose to Fresh air fan complete all as specified & directed. |
| 116 | Supply and fix electric water heater storage type steel body with copper inner tank and heating element up to 2 kw capacity 25 Ltrs BEE 5 star rated complete with all accessories such as safety valve, thermostate NRV, connection pipe complete all as specified & directed. |
| 117 | Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB single pole 20 Amp complete all as specified & directed. |
| 118 | S & F of MCB vertical distribution board, triple pole and neutral (VTPN), 4-way, 415 Volts, factory-assembled type, conforming to IS/IEC 61439 (Low-voltage switchgear and controlgear assemblies), fabricated from powder-coated CRCA steel sheet enclosure, recess-mounted, suitable for MCCB incomer up to 160 Amp having a minimum degree of protection IP-43 and mechanical impact resistance IK-09 with reversible double door, incorporating insulated tinned copper busbar of 250 Amp rating, separate neutral busbar and earth busbar, DIN rail, and detachable gland plate, including all internal interconnections, earthing connections, and blanking plates for all unused ways/spaces complete all as specified & directed. |
| 119 | Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4.0 core complete all as specified and directed. |
| 120 | Supply and filling of river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified.Note : Punned thickness of sand shall be measured & paid only. |
| 121 | Supply and laying well burnt old size bricks, sub class \\"B\\" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender