Tender For Repairs/Renovation Of anganwadi center At Syed Pati Surfraw.Block Gund.
Tender Value
2 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
3 days left
EMD
4000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Renovation Of anganwadi center At Syed Pati Surfraw.Block Gund.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete Complete Job |
| 4 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge (KD wood ) including all fixtures. |
| 5 | Providing and fixing panelled or panelled and glazed shutters for doors, windows andclerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (s KD wood ) including all fixtures |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars |
| 7 | 12 mm thick cement sand plaster in 1:6 Mix |
| 8 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding thecost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 10 | Providing and fixing of colour coated sheets of 0.40mm thick and 300 mm width for eves boarding complete job |
| 11 | Providing and laying ceramic wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments (500x500)mm |
| 12 | Providing and laying ceramic Floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments (500x500)mm |
| 13 | Providing and fixing of following sanitary items of approve brand and quality complete job in all respects including all necessary items of approved brand and quality-PPR pipes 1/2'' dia |
| 14 | Providing and fixing of following sanitary items of approve brand and quality complete job in all respects including all necessary items of approved brand and quality-floor traps 110 mm with double chrome plated cover one grated and one closed and all other fittings required |
| 15 | Providing and fixing of following sanitary items of approve brand and quality complete job in all respects including all necessary items of approved brand and quality-Brass Bib Cock of approved make |
| 16 | Providing and fixing of following sanitary items of approve brand and quality complete job in all respects including all necessary items of approved brand and quality-Brass Angle Valve of approved make |
| 17 | Providing and fixing of following sanitary items of approve brand and quality complete job in all respects including all necessary items of approved brand and quality-Sink for Kitchen |
| 18 | Providing and fixing of following sanitary items of approve brand and quality complete job in all respects including all necessary items of approved brand and quality-Sink Mixers |
| 19 | P/F gun metal gate valve of approved quality 20mm nominal bore Complete job |
| 20 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, incl pvc connection & 50 mm waste pipe incl cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 21 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 22 | P/F of Gyser (Wash room and kitchen) incl. all fixtures Complete job |
| 23 | Distempering with oil bounded washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and inc. priming coat with cement primer .complete job |
| 24 | Distempering with oil bounded washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and inc. priming coat with cement primer .complete job |
| 25 | Carriage of various materials F.Agg/C.Agg by MT for a lead of 15 km |
| 26 | Add provision for Signboard/Photographs all complete Job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender