Tender For Special Repair To Bldg No Cmh-40 (Quarter Guard) At Mil Stn Mount Abu
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
10 days left
EMD
19400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirohi → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Cmh-40 (Quarter Guard) At Mil Stn Mount Abu
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and jointed in any mortar. |
| 2 | Material & Labour for machine cut Kota stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and mirror polishing with over and including 15mm thick screed bed in cement mortar (1:6) for floor/steps finishes, complete all as specified and as directed. |
| 3 | M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and laid over 15 mm thick cement screed bed in CM 1:4 complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | M & L for Virified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inclding 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 6 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7/ 300x600mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete. |
| 7 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 8 | Material and labour for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, finished even and smooth without using extra cement all as specified and directed. |
| 9 | Material and labour for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified and directed. |
| 10 | Material and labour for 10 mm rendering in cement mortar 1:6 on other than fair faces of brick wall surfaces finished even and smooth without using extra cement. |
| 11 | Material and labour for 15 mm thick rendering in cement mortar 1:4 using water proofing compound @ 2% by weight of cement in finish coat on other than fair faces of brick wall surfaces, finished even and smooth without using extra cement complete. |
| 12 | Material and labour for preparation of newly plastered surface of walls and applying two coats of exterior emlusion antifungal paint over a coat of 1 mm thick Birla white wall care putty and smooth surface etc all as specified and directed. |
| 13 | Material and labour for preparation of newly plastered surface of walls and applying of two coats of oil bound distemper over a coat of 1 mm thick Birla white care putty etc. all as specified and directed. |
| 14 | Taking down wooden frame with shutter without taking off shutter from the frame, n-exceeding 1.50 sqm each including removing from site. |
| 15 | Supply and fixing anodised aluminium window and ventilator shutters,powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 16 | S & F 3.5 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each panecomplete all as specified and directed. |
| 17 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided. |
| 18 | M & L for 50 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) laid in alternate bays as in plinth protection incuding finished the surface even and fair without using extra cement complete all as specified and directed. |
| 19 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified. |
| 20 | M & L for brick work with sub class 'B' bricks stright or curved on plan exceeding 6 mtr mean radius with CM 1:6 complete all as specified and directed. |
| 21 | M & L for Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 22 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, drain and similar work; vertical or to batter. |
| 23 | Dismantling of chain link fencing/barbed wire of any description complete all as specified. |
| 24 | Dismantling posts or struts embedded in any surfaces (natural, concrete, masonary etc.) and of any description, any section, taking out embedded portion and making good to disturbed ground surface , complete all as specified & directed by Engineer-in-Charge. |
| 25 | Material & labour for PCC 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete of post holes, complete all as specified. |
| 26 | S & F for Chain link MS galvanisd fencing, not exceeding 4 kg per sqm any size or type complete all as specified and directed. |
| 27 | Supply & fixed mild steel, rolled sections(channel, angle, flat or tee sections) fixed independently cut to ordinary length as in fencing post or struts in fencing etc. including cutting tops to shape as required , drilling holes, notching for wire etc. including flat iron fillets with nuts & bolts for securing chain link fencing including all necessary drilling, bolting or riveting etc complete all as specified and directed. |
| 28 | Material and Labour for steel screw bolts, machine made, dia of neck 11 to 15mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 5 cm and not exceeding 10cm long, complete all as specified and directed. |
| 29 | M&L two coat of syntetic enemel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer incl preparation of surfaces complete. Material and Labour for Testing of water from approved Govt lab samples collected from pump house No-01 at main Gate as per norms of WHO and submission of test reports to the entire satisfaction of Engineer-in-Charge, the test report includes following parameters:- PH value, TDS(mg/l), Hardness (as CaCO3) (mg/l), Fluoride (mg/l), Chloride (mg/l),Turbidity (NTU), E.Coli (cfu), Free residual Chlorine Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender