Tender For Periodical Works In Md Otm Accn At 14 Gtc Subathu Under Ge Kasauli.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Oct 2026
17 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Periodical Works In Md Otm Accn At 14 Gtc Subathu Under Ge Kasauli.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I |
| 2 | Material and labour for preparation of old decorated surface of exterior wall by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint by using roller (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer , over a coat of 1mm thick wall acre putty , same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. |
| 3 | Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction to the satisfaction of Engineer in charge before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv). after carrying out preparation of surface the same shall be got approved from GE before application of acrylic emulsion paint for each building.(v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor. |
| 4 | Material and labour for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper over one coat of 1mm thick wall putty using roller all as specified and prescribed by manufacturer of paint Ist Quality and all as directed at site by Engr-in-Charge . |
| 5 | Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction to the satisfaction of Engineer in charge before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building.(v). The colour / shade will be all as approved by GE. |
| 6 | Material and labour for 1.00 thick Wall care putty on wall , complete all as specified and directed |
| 7 | Taking down cement plastering at any description on brick wall etc including raking out joints hacking for key scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed. |
| 8 | Material and labour rendering 5 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and directed. |
| 9 | Material and labour for Oil Bound Distemper three coats on ceiling over 1mm thick wall putty incl preparation of newly plastered surfaces.complete all as specified and directed by Engr In Charge. |
| 10 | Material and labour for Rendering 15 mm thick cement plaster on brick walls in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing liquid will be measured and paid seperately. |
| 11 | Supply only water proofing compound ISI Marked complete all as specified and directed. |
| 12 | Material and labour for Rendering 10 mm thick on fair faces of brick work or concrete walls surfaces in CM 1:6 finished to even & smooth without using extra cement complete all as specified and directed. |
| 13 | Material and labour for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint by using Roller (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty), a coat of exterior water based, over 1mm thick wall care putty primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv). after carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building.(v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed. |
| 14 | Material and labour for preparation of new surface of internal wall by reputed paint manufacturers and applying two coats of acrylic distemper over one coat of 1mm thick wall putty using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge .Note:- (i) The new surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction to the satisfaction of Engineer in Charge before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building.(v). The colour / shade will be all as approved by GE |
| 15 | Material and labour for preparation of old surface of wall plastered including cornices and pillasters etc and applying one coat of white wash on wall all as specified and as directed by Engr-in-Charge. |
| 16 | Material and labour for preparation of old surface of ceiling plastered including cornices and pillasters etc and applying one coat of white wash on ceiling all as specified and as directed by Engr-in-Charge. |
| 17 | Material and labour for new plastered surface on walls and applying two coats cement based paint over one coat of alkali resistant priming paint complete.( Make : Snowsem/Durocem/Crimocem) |
| 18 | Material and labour for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and two coats of oil bound distemper (White or tinted ) by Roller complete all as specified and directed. |
| 19 | Material and labour for complete removal of existing treatment on ceiling, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of ceiling and applying two coats of Oil bound distemper by Roller complete all as specified and directed. |
| 20 | Material and labour for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 21 | Material and labour for preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed by Engg in charge. |
| 22 | Material and labour for preparation of old painted steel surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality complete all as specified and directed by Engg in charge. |
| 23 | Material & labour for preparation of old brick & concrete surfaces as in floors, walls etc of any description not otherwise described over 10 cm width or girth and applying two coat of Acrylic/ plastic emulsion paint, complete all as specified & directed. |
| 24 | Material and labour for for writing letters/Bldg Nos or figures(Block, Roman or Indian) on wall 10cm height using synthetic enamel paint white or circular /black painted, black back ground complete all as specified and directed by Engg in charge. |
| 25 | Material and labour for preparation of old treated wall /roof surface including scrapping with wire brushes, rubbing down with emery paper, washing etc and applying one coat of exterior emulsion paint (APEX / Weather coat) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender