Tender For Annual Maintenance, Repairs And Other Emergent Works Of Various Water Supply Schemes Falling In The Area Of South Lolab Of Phe Sub-Division Sogam For The Year 2026-27 (Part-Ii)
Tender Value
4 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
1 days left
EMD
12000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance, Repairs And Other Emergent Works Of Various Water Supply Schemes Falling In The Area Of South Lolab Of Phe Sub-Division Sogam For The Year 2026-27 (Part-Ii)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge |
| 2 | In all kinds of soils |
| 3 | Ordinary rock |
| 4 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 5 | In all kinds of soils |
| 6 | Ordinary rock |
| 7 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 8 | In all kinds of soils |
| 9 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 10 | Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing. |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : |
| 12 | Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 13 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: |
| 14 | Cement mortar 1:6 (1 Cement : 6 coarse sand) nallah |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): |
| 17 | Second class kail |
| 18 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete |
| 19 | First class Budloo/Fir wood |
| 20 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. |
| 21 | With 2nd class teak wood beading 62x19 mm |
| 22 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : |
| 23 | Second class Kail wood |
| 24 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. |
| 25 | 100 mm and 150 mm dia GI pipes |
| 26 | 65 mm and 80 mm dia GI pipes |
| 27 | 40 mm and 50 mm dia GI pipes |
| 28 | 25 mm and 32 mm dia GI pipes |
| 29 | 15 mm and 20 mm dia GI pipes |
| 30 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 mdeduct for not rolling with power roller of minimum 8 tons for banking excavated earth in layers not exceeding 20cm in depth. Deduct for not watering the excavted earth for banking . |
| 31 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge |
| 32 | Above 40 mm nominal bore |
| 33 | 15 - 40 mm nominal bore |
| 34 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) |
| 35 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. |
| 36 | 100 mm dia pipes |
| 37 | 125 mm dia pipes |
| 38 | 150 mm dia pipes |
| 39 | 200 mm dia pipes |
| 40 | 250 mm dia pipes |
| 41 | 300 mm dia pipes |
| 42 | Providing / fixing of M.S double collers/ arresting of leakages by way of welding including all sorts of carriages |
| 43 | 80 mm dia |
| 44 | 100 mm dia |
| 45 | 150 mm dia |
| 46 | 200 mm dia |
| 47 | Providing / fixing of double collers, G.I./ M.S. for arresting of leakages by using led & spun yarn incld. earthwork excavation, refilling etc. including all sorts of carriages (length verying from 0.60 to 1 Mtr.) |
| 48 | 40 mm dia |
| 49 | 50 mm dia |
| 50 | 65 mm dia |
| 51 | 80 mm dia |
| 52 | 100 mm dia |
| 53 | 150 mm dia |
| 54 | 200 mm dia |
| 55 | Providing and fixing including testing, commissioning & fabricating at site M.S pipe Specials Etc. & all sorts of carriages upto site of work, as per requirement at site complete job. |
| 56 | Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. |
| 57 | Lighting points |
| 58 | Heating points |
| 59 | Supply/ fixing of pipe specials from open market, if not available in the Divisional stores of ISI marked standard make. |
| 60 | 100 mm dia G.I Union |
| 61 | 80 mm dia G.I Union |
| 62 | 65 mm dia G.I. Union |
| 63 | 50 mm dia G.I. Union |
| 64 | 40 mm dia G.I. Union |
| 65 | 25 mm dia G.I. Union |
| 66 | 20 mm dia G.I. Union |
| 67 | 80 mm dia G.I. Elbow |
| 68 | 65 mm dia G.I. Elbow |
| 69 | 50 mm dia G.I. Elbow |
| 70 | 40 mm dia G.I. Elbow |
| 71 | 25 mm dia G.I. Elbow |
| 72 | 20 mm dia G.I. Elbow |
| 73 | 80 mm dia G.I. Socket |
| 74 | 65 mm dia G.I. Socket |
| 75 | 50 mm dia G.I. Socket |
| 76 | 40 mm dia G.I. Socket |
| 77 | 25 mm dia G.I. Socket |
| 78 | 20 mm dia G.I. Socket |
| 79 | 80 mm dia G.I. Nipple upto 10\\" |
| 80 | 65 mm dia G.I. Nipple upto 10\\" |
| 81 | 50 mm dia G.I. Nipple upto 10\\" |
| 82 | 40 mm dia G.I. Nipple upto 10\\" |
| 83 | 25 mm dia G.I. Nipple upto 10\\" |
| 84 | 20 mm dia G.I. Nipple upto 10\\" |
| 85 | 15 mm dia G.I. Nipple upto 10\\" |
| 86 | 25x25x20 mm dia G.I. Equal Tee |
| 87 | 40x40x25 mm dia G.I. Equal Tee |
| 88 | 50x50x40 mm dia G.I. Equal Tee |
| 89 | 65x65x50 mm dia G.I. Equal Tee |
| 90 | 80x80x65 mm dia G.I. Equal Tee |
| 91 | 25x20 mm dia Socket/ Reducer |
| 92 | 40x25 mm dia Socket/ Reducer |
| 93 | 50x40 mm dia Socket/ Reducer |
| 94 | 65x50 mm dia Socket/ Reducer |
| 95 | 80x65 mm dia Socket/ Reducer |
| 96 | 25x20 mm dia Elbow/ Reducer |
| 97 | 40x25 mm dia Elbow/ Reducer |
| 98 | 50x40 mm dia Elbow/ Reducer |
| 99 | 65x50 mm dia Elbow/ Reducer |
| 100 | 80x65 mm dia Elbow/ Reducer |
| 101 | 100mm dia Elbow |
| 102 | 100mm dia Equal Tee |
| 103 | 100 mm dia G.I. Bend |
| 104 | 80 mm dia G.I. Bend |
| 105 | 65 mm dia G.I. Bend |
| 106 | 50 mm dia G.I. Bend |
| 107 | 40 mm dia G.I. Bend |
| 108 | Supply of Kerosene |
| 109 | Re-threading of damaged pipe ends including carriage from site to workshop and back. |
| 110 | 20 mm dia |
| 111 | 25 mm dia |
| 112 | 40 mm dia |
| 113 | 50 mm dia |
| 114 | 65 mm dia |
| 115 | 80 mm dia |
| 116 | 100 mm dia |
| 117 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 118 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 119 | White washing with lime to give an even shade on Old Work (two or more coats) |
| 120 | Colour washing such as green blue or buff to give an even shade |
| 121 | New work (two or more coats) with a basecoat of white washing with lime. |
| 122 | New work (two or more coats) with basecoat of whiting |
| 123 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 124 | Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications |
| 125 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 126 | Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 127 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 128 | Applying priming coat: With ready mixed aluminum primer of approved brand and manufacture on resinous wood and ply wood |
| 129 | Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 130 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 131 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 132 | Supply and filling of filter media from approved source - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, complete job |
| 133 | Supply and filling of filter media from approved source - Sand (Coarse filter sand - in filter beds. Including all carriages, complete job |
| 134 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including skirting in vertical, rubbing, polishing and curing complete with: Makrana White Second quality (16mm) |
| 135 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters: 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 136 | 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 137 | 80x1.20 mm M.S. laths with 1.20 mm thick top cover |
| 138 | 80x0.90 mm M.S. laths with 0.90 mm thick top cov |
| 139 | Providing and fixing ball bearing for rolling shutters. |
| 140 | Desilting of various structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution complete job. |
| 141 | Using buckets, ropes etc. Manually |
| 142 | Through washout by Mix silt with water |
| 143 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete |
| 144 | Upto 40mm Nominal Bore |
| 145 | Above 40mm Nominal Bore |
| 146 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 147 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 148 | Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-incharge |
| 149 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 150 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 151 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 152 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 153 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 154 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 155 | Providing / fixing of new DI Sluice valve with cap, including cost of nuts, bolts, rubber insulations, flanges and welding of ISI marked incl all carriages upto site of works, complete . and providing of check certificate from the standard manufacturer (Tail Pieces are to be paid seperately |
| 156 | 300 mm dia Sluice valve |
| 157 | 250 mm dia Sluice valve |
| 158 | 200 mm dia Sluice valve |
| 159 | 150 mm dia Sluice valve |
| 160 | 125 mm dia Sluice valve |
| 161 | 100 mm dia Sluice valve |
| 162 | 80 mm dia Sluice valve |
| 163 | Providing and fixing Gun metal gate valvue with CI wheel of approved quality (Screwed end) |
| 164 | 100mm dia |
| 165 | 80mm dia |
| 166 | 65mm dia |
| 167 | 50mm dia |
| 168 | 40mm dia |
| 169 | 25mm dia |
| 170 | 20mm dia |
| 171 | Providing and fixing Gun metal gate valvue with CI wheel of approved quality (Screwed end) 65 mm dia Sluice valve |
| 172 | Providing and fixing Gun metal gate valvue with CI wheel of approved quality (Screwed end) 50 mm dia Sluice valve |
| 173 | Supply of CFL Bulbs for filtration plant sites etc. |
| 174 | 20W CFL |
| 175 | 15W CFL |
| 176 | 12W CFL |
| 177 | 9W CFL |
| 178 | Welding, including transportation of plant at site etc. complete |
| 179 | By gas plant |
| 180 | By electric plant |
| 181 | Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport |
| 182 | Cement & steel, G.I/C.I pipe avg. lead upto 01 Kms |
| 183 | Cement & steel, G.I/C.I pipe avg. lead upto 02 Kms |
| 184 | Cement & steel, G.I/C.I pipe avg. lead upto 03 Kms |
| 185 | Cement & steel, G.I/C.I pipe avg. lead upto 04 Kms |
| 186 | Cement & steel, G.I/C.I pipe avg. lead upto 05 Kms |
| 187 | Cement & steel, G.I/C.I pipe avg. lead beyond 5 Kms upto 10 Kms (per Km) |
| 188 | Cement & steel, G.I/C.I pipe avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 189 | Cement & steel, G.I/C.I pipe avg. lead beyond 20 Kms per additional Km |
| 190 | Sand & Agg. 20 mm avg. lead of upto 01 Kms |
| 191 | Sand & Agg. 20 mm avg. lead upto 02 Kms |
| 192 | Sand & Agg. 20 mm avg. lead upto 03 Kms |
| 193 | Sand & Agg. 20 mm avg. lead upto 04 Kms |
| 194 | Sand & Agg. 20 mm avg. lead upto 05 Kms |
| 195 | Sand & Agg. 20 mm avg. lead beyond 5 Kms upto 10 Kms (per Km) |
| 196 | Sand & Agg. 20 mm avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 197 | Sand & Agg. 20 mm avg. lead beyond 20 Kms per additional Km |
| 198 | 40 mm Agg. avg. lead of upto 01 Km |
| 199 | 40 mm Agg. avg. lead upto 2 Kms |
| 200 | 40 mm Agg. avg. lead upto 3 Kms |
| 201 | 40 mm Agg. avg. lead upto 4 Kms |
| 202 | 40 mm Agg. avg. lead upto 5 Kms |
| 203 | 40 mm Agg. avg. lead beyond 05 Kms upto 10 Kms (per Km) |
| 204 | 40 mm Agg. avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 205 | 40 mm Agg. avg. lead beyond 20 Kms per additional Km |
| 206 | Stone soiling avg. lead of upto 1 Km |
| 207 | Stone soiling avg. lead upto 2 Kms |
| 208 | Stone soiling avg. lead upto 3 Kms |
| 209 | Stone soiling avg. lead upto 4 Kms |
| 210 | Stone soiling avg. lead upto 5 Kms |
| 211 | Stone soiling avg. lead beyond 05 Kms upto 10 Kms (per Km) |
| 212 | Stone soiling avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 213 | Stone soiling avg. lead beyond 20 Kms per additional Km |
| 214 | Carriage of pipes from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport |
| 215 | 100 mm and 125 mm dia DI/ GI pipes 1Km |
| 216 | 100 mm and 125 mm dia DI/ GI pipes 2Km |
| 217 | 100 mm and 125 mm dia DI/ GI pipes 3Km |
| 218 | 100 mm and 125 mm dia DI/ GI pipes 4Km |
| 219 | 100 mm and 125 mm dia DI/ GI pipes 5Km to 10 Km |
| 220 | 100 mm and 125 mm dia DI/ GI pipes 10Km to 20 Km |
| 221 | 100 mm and 125 mm dia DI/ GI pipes beyond 20 Km every additional lead |
| 222 | 150 mm to 200 mm dia DI pipes 1 Km |
| 223 | 150 mm to 200 mm dia DI pipes 2 Km |
| 224 | 150 mm to 200 mm dia DI pipes 3 Km |
| 225 | 150 mm to 200 mm dia DI pipes 4 Km |
| 226 | 151 mm to 200 mm dia DI pipes 5 Km |
| 227 | 150 mm to 200 mm dia DI pipes 5Km to 10Km |
| 228 | 150 mm to 200 mm dia DI pipes 10Km to 20Km |
| 229 | 150 mm to 200 mm dia DI pipes beyond 20Km for every additional lead |
| 230 | Centering and shuttering including strutting, propping etc, and removal of form for. |
| 231 | Foundations, footings, bases of columns etc for mass concrete. |
| 232 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 233 | Columns, pillars, piers, abutments, posts and struts. |
| 234 | Suspended floors, roofs, landings, balconies and access platforms. |
| 235 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 236 | Stairs (excluding landings) except spiral staircases. |
| 237 | Edges of slabs and breaks in floors and walls under 20cm wide |
| 238 | Extra for shuttering in circular work (20% of respective centring and strutting items) |
| 239 | Clearing snow (with frost) from roads, manually using picks and shovels; snow depth upto 150 mm |
| 240 | Clearing snow avalanche mixed with frost and compressed snow, including all types of equipments and safety to the workers while clearing the avalanches at head site |
| 241 | Supply of fire wood / rejection wood incld. all carriages upto site of work, complete |
| 242 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry |
| 243 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. (Nallah) |
| 244 | Renewing glass panes and re-fixing existing wooden fillets: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 245 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 246 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 247 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 248 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 249 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 250 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 251 | M.S. tube |
| 252 | E.R.W. tubes |
| 253 | G.I. pipes |
| 254 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. |
| 255 | Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 256 | Stainless steel (grade 304) wire gauze of 0.5mm dia wire and 1.4 mm aperture on both sides. |
| 257 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 258 | In colour such as White, Ivory, Grey, Fume Red Brown |
| 259 | In all colours, shades, except White, Ivory, Fume Red Brown |
| 260 | 75 mm diametre |
| 261 | 110 mm diametre |
| 262 | 12mm Cement plaster finished with a floating coat of neat cement of mix: |
| 263 | 1 : 3 ( 1 cement : 3 fine sand) |
| 264 | 1 : 4 ( 1 cement : 4 fine sand) |
| 265 | Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 266 | Providing and Laying of Stone Soling Hand Packed and compacted manually including all carriages complete |
| 267 | Good Earth |
| 268 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. |
| 269 | Made of G.I. wire of dia 4 mm |
| 270 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 16.67.1 Overhead informatory road signage. |
| 271 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 272 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 273 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 274 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). |
| 275 | 50 mm dia |
| 276 | 80 mm dia. |
| 277 | 100 mm dia. |
| 278 | 80 mm dia. nominal bore |
| 279 | 100 mm dia. nominal bore |
| 280 | 150 mm dia. nominal bore |
| 281 | 200 mm dia. nominal bore |
| 282 | Providing and laying D.I. Specials of Class K-12 suitable for push-on jointing as per IS : 9523 |
| 283 | Upto 600 mm dia. |
| 284 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic items) |
| 285 | With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 286 | With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 287 | With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm) |
| 288 | Supply and fixing of Inaugration stone with custom carved letters complete including Making of Foundation made out of Brick work including 15mm thick Plater in 1:4 Mix including all sorts of carriages wherever required |
| 289 | Providing and fixing of printed PVC type flex banners as per requirement complete job |
| 290 | Without the supporting frame of steel rolled hollow Sq. bars |
| 291 | With the supporting frame of steel rolled hollow Sq. bars |
| 292 | With the supporting frame of steel rolled hollow Sq. bars and cardboard backing |
| 293 | Supply of unskilled labours |
| 294 | Supply of skilled labour |
| 295 | Supply of Carpenter 2nd class |
| 296 | Supply of Mason 2nd class |
| 297 | Providing and Fixing of M.C.C.B.of ISI marked standard make the job includes dismantling of damaged/non functional Amp. M.C.C.B. and fixing of new one including all sorts carriage from source to workshop including carriages of salvaged material from filtration plant upto Divisional Stores including testing, installing and commissioning complete job |
| 298 | 03 Pole 200 Amp. |
| 299 | 03 Pole 100 Amp. |
| 300 | 04 Pole 100 Amp. |
| 301 | 02 Pole 32 Amp. |
| 302 | 03 Pole 32 Amp. |
| 303 | 04 Pole 32 Amp. |
| 304 | 63 Amp 04 pole change over |
| 305 | 3.5 core cable 50 mm thick |
| 306 | Providing fixing & commissioning of LED Flood Lights of 50 Watts with stand including all accessories required at site complete job inclusive all carriages. |
| 307 | Providing fixing & commissioning of LED Flood Lights of with stand including all accessories required at site complete job inclusive all carriages. |
| 308 | Supply of LED lights of different Wattage of approved m ake ISI marked complete in all respects |
| 309 | Providing fixing & commissioning of Flanges in pairs including welding, cutting of threaded portion, washers including cost of Flanges with Nuts and Bolts including making joint leak proof including all sorts of labours whatsoever required |
| 310 | 150mm dia |
| 311 | 100mm dia |
| 312 | 80mm dia |
| 313 | 65mm dia |
| 314 | Restoration of damaged pipes due to frost / frozen including earth works excavation /dismantling /refilling / making good the same complete job in all respects. Upto 20mm to 100mm dia (by using blue lamp including cost of K.oil) |
| 315 | P/F of Air Releasing Valves (single acting) including cutting of bore hole , welding of the pedestal rod and providing laying of cement concrete 1:3:6 mix with shuttering box PGI 9”X9”x12” around the pedestal rod with all carriages and head load upto actual site of work |
| 316 | 25mm dia Air Valve |
| 317 | 20mm dia Air Valve |
| 318 | Laying & fixing of HDPE Pipes complete excluding earth work, but including all carriages upto site of work |
| 319 | 25mm dia |
| 320 | 32mm dia |
| 321 | 40mm dia |
| 322 | 50mm dia |
| 323 | Fixing charges of Sluice Valves including Testing, Commissioning and carriages from divisional store to actual site of work including dismantling of old (in case of replacement) and carriage of same to divisional store, Complete job |
| 324 | 200 mm dia |
| 325 | 150 mm dia |
| 326 | 100mm dia |
| 327 | 80mm dia |
| 328 | 50mm dia |
| 329 | Engagement of JCB including haltage charges and one side POL Charges |
| 330 | Constructing muthu bunds,comprising boulders and wood bushes in alternate layers; including working in water situations |
| 331 | Supplying and Laying of polythene sheets (Black) at off take points during lean dscharge / Freezing |
| 332 | Opening out old wire crates those and re-binding after filling. |
| 333 | Filling empty cement bags with sand/ earth including cost of bags and earth / sand (Earth or sand to be locally excavated) including all sorts of carriages upto actual site of work |
| 334 | Removing, washing of old filter media including washing of filter beds and laying of same in position complete job. |
| 335 | Supplying & fixing as per site requirement of Nylon rope on 10 mm dia of Standartd make including all carriages comp job |
| 336 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 337 | Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin-charge |
| 338 | Upto 150 mm diameter. |
| 339 | Above 150 mm diaupto 300 mm dia. |
| 340 | Cutting road and making good the same including supply of extra quantities of material i.e. crushed aggregate, moorum screening, red bajri and labour required. |
| 341 | Water bound macadam. |
| 342 | Hire charges for welding plant for necessary repairs of pipe network/structures etc as per requirement including C/O operator, Genrator, welding rods, wiring and carriage of man and machinary complete in all respects as per requirement at site but excluding additional materials like collar, pipe specials, steel section etc. |
| 343 | Hand-packing stones in wire-crates; excluding cost of crates and stones |
| 344 | Supply of wire crates including all types of carriages upto site of work. |
| 345 | Supply of stones including all types of carriages upto site of work. |
| 346 | Supply of Spun yarn |
| 347 | Supply of Pig Lead at site of work |
| 348 | P/F of PPR pipe, including all pipe fitting, carriages upto Site of work complete in all respects |
| 349 | 25 mm |
| 350 | 32 mm |
| 351 | Providing of PPR Gate valves/ Ball valves including all necessary accessories as per requirement at site complete |
| 352 | 25 mm Gate valve/ Ball valve |
| 353 | 32 mm Gate Valve/ Ball valve |
| 354 | 40 mm Gate valve/ Ball valve |
| 355 | Providing and fixing P.V.C low level flushing cistern with manually18.0 (Sanitary Installation) 240 CODE NO. DESCRIPTION UNIT RATE ₹ controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 litre capcity -white |
| 356 | Lettering with black Japan paint of approved brand and manufacture. |
| 357 | Providing of plastic buckets, Mug, Brooms, Wippers etc of good quality at various plants complete. |
| 358 | Fabrication of GI bends of required angle/size, Tees, tail pices etc at site using welding job including cutting of pipes, fixing of flunges, nuts, bolts, washers etc for Washout system. The job includes carriage of man , machinary, carriage of pipe material from departmental store upto site of work complete in all respects. Cost of flanges will be paid separately |
| 359 | 80mm dia |
| 360 | 100mm dia |
| 361 | 150mm dia |
| 362 | Fabrication of M.S Glands/pipe specials of required size, Tees, tail pices etc at site as per ground profile using welding job including cutting of pipes, fixing of flunges, nuts, bolts, washers etc for Washout system. The job includes cost of M.S pipe, flanges, nuts , bolts glands, R.I cloth complete job |
| 363 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto/above plinth level |
| 364 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 365 | Providing/ fixing of Rubber Gaskets |
| 366 | 80 mm dia |
| 367 | 100 mm dia |
| 368 | 150 mm dia |
| 369 | 200 mm dia |
| 370 | 250 mm dia |
| 371 | Providing/ fixing of Rubber Washers |
| 372 | 80 mm dia |
| 373 | 100 mm dia |
| 374 | 150 mm dia |
| 375 | 200 mm dia |
| 376 | 250 mm dia |
| 377 | Providing and fixing 1st quality ceramic glazed floor/ wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 378 | Hire Charges Of loudSpeakers for necessary announcements |
| 379 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) |
| 380 | 15 mm dia. nominal bore |
| 381 | 20 mm dia. nominal bore |
| 382 | 25 mm dia. nominal bore |
| 383 | 32 mm dia. nominal bore |
| 384 | 40 mm dia. nominal bore |
| 385 | 50 mm dia. nominal bore |
| 386 | 65 mm dia. nominal bore |
| 387 | 80 mm dia. nominal bore |
| 388 | 100 mm dia. nominal bore |
| 389 | Providing stabilizer oil |
| 390 | Fixing of Sluice Valave as directed by Site Engineer Complete job |
| 391 | 125mm |
| 392 | 100 mm |
| 393 | 150mm |
| 394 | Hire charges of dewatering pumping moter/sludge pump 40/65/80mm Dia for bailing out water from trenches etc incl. fuel charges, operational) charges to and fro complete job |
| 395 | Hiring of professsional Driver with HMV Liscence for smooth operation of Tanker Services in case of emergency. |
| 396 | Laying & fitting of GI pipes (all classes) complete excluding cost of pipes , fittings and earthwork. |
| 397 | 15mm & 20mm dia GI pipes |
| 398 | 25mm & 32mm GI pipes |
| 399 | 40mm & 50mm DI/GI pipes |
| 400 | 65mm & 80mm dia GI pipes |
| 401 | Providing, Supplying, Lowering, Laying, Jointing, Hydraulic testing and Commissioning of PE-100 and PN-10 HDPE Pipes in standard lengths confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material and all kinds of pipe specials including Transportation, Freight charges, Inspection charges, Loading, Un-Loading charges, Conveying to departmental store, Jointing procedure as per relevant IS code complete with materials for jointing procedure with all labours as directed by Engineer in Charge as per IS 7634- Part-II, Hydraulic testing to specified pressures (including cost of all materials Labour and Water) for specified lengths inclusive of all kinds of taxes and carriage complete |
| 402 | 32mm dia |
| 403 | 75mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender