Tender For Provision Of Pumping Arrangements To Treated Sewage Water From Sewage Treatment Plant To Nearby Parks At Hvf Estate.
Tender Value
1.40 Crore
Estimated cost
Bid Submission
08 Oct 2026
10 days left
EMD
2.16 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Pumping Arrangements To Treated Sewage Water From Sewage Treatment Plant To Nearby Parks At Hvf Estate.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation in hard/dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out |
| 2 | Demolition of Un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thick. |
| 3 | Demolition of Brickwork or stone/boulder masonry, laid dry of any description. |
| 4 | Excavating in hard/dense soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out. |
| 5 | Excavating over areas in hard/ dense soil n exc 1.5m deep and getting out |
| 6 | Earth work excavation in hard/ dense soil in trenches width and depth exceeding 1.50m and getting out. |
| 7 | Excavating over areas in hard and dense soil exc 1.5m deep and getting out |
| 8 | Material and labour for sand filling under floors or in foundation including watering and consolidation. |
| 9 | Material and Labour for broken stone Hardcore of gauge n.exc 63mm deposited , spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface. |
| 10 | M & L for PCC 1:3:6, C2 Type using 40mm graded aggregate for foundation, filling and mass concrete. |
| 11 | Material and Labour for cement concrete 1:2:4 type B1 20mm graded aggregate in foundation filling and mass concrete. |
| 12 | Excavation of moorum/red bajri from borrow pits for floors or pavings, Removal of excavated soils lead exceeding exc. 1.50 km but n exc. 5 km and depositing where directed. and refilling of soft / loose including spreading, laid in layers n exc. 15 cm thick leveling, watering and well ramming in layers where directed. |
| 13 | M & L for providing RCC M30 Grade (Design Mix) using 20mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles, Drain etc. and mass concrete. |
| 14 | M & L for providing reinforced cement concrete in column, pillars and struts with cement concrete (M20) 1:1.5:3 mix using 20mm graded aggregate. |
| 15 | M & L for flat Formwork to sides of concrete foundations, footings, Drain wall and bases, columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. |
| 16 | M & L for form work to Square, rectangular/polygonal sides of RCC members such as pillars, posts, struts, piers, columns and stanchions |
| 17 | M & L for Formwork to faces of walls,retaining walls, suspended slabs such as roof slabs, floorslabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 18 | S & F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 19 | S & F of mild steel bars 6 to 8 mm dia TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips . |
| 20 | M & L for Pre-cast cement Concrete block made up of PCC 1:2:4, Type B1 set in CM 1:6 masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete |
| 21 | Material and labour for plastering with CM 1:4, 15mm thick on fair faces of brick work/ concrete surfaces or for drain work. |
| 22 | Material and Labour for plastering in CM 1:3, 12mm thick of RCC Wall / Ceiling surfaces. |
| 23 | Material and Labour for painting two coats of white washing on walls including preparation of new surfaces |
| 24 | Material and Labour for white washing in ceiling surfaces including preparation of new surfaces. |
| 25 | M & L for Distempering on walls(OBD) two coats over on newly plastered wall surfaces including preparation of new surfaces. |
| 26 | Returning / refilling in hard/dense soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm. |
| 27 | Removal of excavated earth/debris exceeding 250m but not exceeding 500m and depositing where directed. |
| 28 | Supply and Laying of 50mm High density polyethylene pipes (HDPE) of pressure rating 10 kgf/cm2 fixed in trenches including all jointing and necessary fittings complete all as directed. |
| 29 | Supply and Laying of 63mm High density polyethylene pipes (HDPE) of pressure rating 10 kgf/cm2 fixed in trenches including all jointing and necessary fittings complete all as directed. |
| 30 | Supply and Laying of 25 mm High density polyethylene pipes (HDPE) of pressure rating 10 kgf/cm2 fixed in trenches including all jointing and necessary fittings complete all as directed. |
| 31 | Supply and fixing of 50mm dia Gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe or PVC with all accessories fittings required. Make should be ISI Heavy duty. |
| 32 | Supply and fixing of 25mm Gun -metal globe or gate valves with iron wheel head, screwed both ends for iron pipe or PVC with all accessories fittings required. Make should ISI Heavy duty. |
| 33 | Supply and Fixing of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (GdeE- 250) quality A as directed. |
| 34 | Supply and Fixing of Mono Block pump capacity 7.50HP, 3 phase, 5.5KW suction pipe of 65mm and delivery pipe of 50mm. Total head is 34m including necessary foot valve. (Make: CRI/KIRLOSKAR/CROMPTON/LUBI or suitably equivalent make) |
| 35 | Supply and Fixing of Mono Block pump capacity 3.0HP, 3 phase,2.2KW suction pipe of 65mm and delivery pipe of 50mm. Total head is 18m including necessary footvalve. (Make: CRI/KIRLOSKAR/CROMPTON/ LUBI or suitably equivalent make) |
| 36 | Supply and Fixing of Mono Block pump capacity 1.0HP, 3 phase, 0 .75KW suction pipe of 50mm and delivery pipe of 50mm. Total head is 12m including necessary footvalve. (Make: CRI/KIRLOSKAR/CROMPTON/LUBI or suitably equivalent make) |
| 37 | Supply and Fixing of welded steel wire fabric supplied to wooden or steel members weight not exceeding 4 kg per sqm. |
| 38 | Material and labour for galvanised pipes of medium grade bore dia 150 mm, with all fitting; laid in trenches all complete |
| 39 | Material and labour for fixing Cast Iron peg mark (75cm Length wt not less than 6Kg) to identify underground Pipe Line work including fixing with Cement concrete 1:2:4 using 20mm jelly all complete and as directed by EIC |
| 40 | M & L for Fixing Stainless Steel Name/Sign Board of Size 450 x 300mm including 1mm thick stickering and Bold Letter Stickering \\"NOT FOR DRINKING\\" all complete and as directed by EIC |
| 41 | M & L for Non Clog Sewage Submersible pump 2HP capacity, 3 Phase, 1.5 KW, Delivery 50mm, 2800rpm with cutter fan arrangements at suction to agitate the liquid including necessary accessories. (Make: CRI/KIRLOSKAR/ CROMPTON/LUBI or suitably equivalent make) |
| 42 | Material and labour for Point wiring with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 1.5/2.5 sqmm copper earth continuity wire. a)one light point controlled by one switch light/bell/fan with cables 1.5 sq.mm size |
| 43 | Material and labour for Point wiring with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 1.5/2.5 sqmm copper earth continuity wire. b)One 3 pin plug socket with switches flush type 5A on same board with 2.5sqmm cable |
| 44 | Supply & fixing of switch piano, flush type single pole one way 6 amps. (ANCHOR / LEGRAND/ HAVELLS or Suitable equivalent make). |
| 45 | Material & Labour for ceiling rose, 3 Phase/PVC/polycarbonate, isolated body (ANCHOR / LEGRAND/ HAVELLS or Suitable equivalent make). |
| 46 | Supply & fixing of lamp holders PVC/ polycarbonate type with cord grid cap suitable for pendant/straight/slanding fittings. |
| 47 | Supply & Fixing of Socket outlet 2 in 1, 3 pin, 6A (ANCHOR / LEGRAND/ HAVELLS or Suitable equivalent make). |
| 48 | Supply & Fixing of Switch socket combination 2 in 1, 3 pin, 6 and 16 Ampflush type universal (ANCHOR / LEGRAND/ HAVELLS or Suitable equivalent make). |
| 49 | Supply & fixing of step type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required. (ANCHOR / LEGRAND/ HAVELLS or Suitable equivalent make). |
| 50 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR is PVC insulated copper conductor, in PVC conduit, single core cable in surface/recessed as required. (Kundan/ Finolex/ havells or suitable equivalent make) a) 2x2.5 sqmm + 1x2.5 sqmm earth wire |
| 51 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR is PVC insulated copper conductor, in PVC conduit, single core cable in surface/recessed as required. (Kundan/ Finolex/ havells or suitable equivalent make) b) 2x4.0 sq. mm + 1x4.0 sq. mm earth wire |
| 52 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR is PVC insulated copper conductor, in PVC conduit, single core cable in surface/recessed as required. (Kundan/ Finolex/ havells or suitable equivalent make) c) 4x4.0 sq. mm + 1x4.0 sq. mm earth wire |
| 53 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR is PVC insulated copper conductor, in PVC conduit, single core cable in surface/recessed as required. (Kundan/ Finolex/ havells or suitable equivalent make) d) 4x10.0 sq. mm + 1x10.0 sq. mm earth wire |
| 54 | Supply & Fixing of 415V sheet metal enclosures for DB's when MCBs to be used, Triple pole & neutral, 4 way with Double door. (LEGRAND/HAVELLS/ABB or Suitable equivalent make) |
| 55 | supply & Fixing of 240V sheet metal enclosures for DB's when MCBs to be use, single pole & neutral, Double door 8 way with 200 amps rated busbar. (LEGRAND/HAVELLS/ABB or Suitable equivalent make) |
| 56 | Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. TPN/FP 100 AMP. (LEGRAND/HAVELLS/ABB or Suitable equivalent make) |
| 57 | Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. TP 32 AMP. (LEGRAND/HAVELLS/ABB or Suitable equivalent make) |
| 58 | Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. (Legrand/havells/ABB or Suitable equivalent make) |
| 59 | Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable in Hard/dense soil |
| 60 | Material & labour for sand filling for cushioning on U.G cable |
| 61 | Material & labour for old size Bricks; common burnt clay building bricks sub class B designation 75 for protection to U.G cable |
| 62 | Returning, filling in hard/ dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 63 | Supply & fixing of Galvanised steel tube , medium grade 100mm |
| 64 | Demolition of unreinforced cement concrete of any description and in any position. |
| 65 | Material and labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete. |
| 66 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty underground cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanizes steel wire or tape and overall pvc sheathed 16 sq.mm nominal cross section 4 core stranded conductor. Make finolex/nicco/gloster/Polycab or Suitable equivalent make |
| 67 | Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 35 sqmm, 3.5 core. Make finolex/nicco/gloster/ Polycab or Suitable equivalent make |
| 68 | Supply & fixing of Cable end termination along with glands suitable for 4 core 16 sq.mm pvc armoured cable |
| 69 | Supply & fixing of STAR DELTA starter with suitable protection relay for 7.5HP Water pump motor. MAKE: BCH/L&T/SEIMENS/ABB or Suitable equivalent make |
| 70 | Supply & fixing of DOL starter with suitable protection relay for 3 HP Water pump motor. MAKE: BCH/L&T/ SEIMENS/ABB or Suitable equivalent make |
| 71 | Supply & fixing of DOL starter with suitable protection relay for 1 HP Water pump motor.MAKE: BCH/L&T / SEIMENS/ ABB or Suitable equivalent make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender