Tender For Creation Of Office Space For Avnl Inside The Cafvd Khadki C Us Pune
Tender Value
25.37 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
2 days left
EMD
51000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Creation Of Office Space For Avnl Inside The Cafvd Khadki C Us Pune
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead for area 3 sq. metres and below |
| 2 | Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 6 | Hacking out plastering 15 cm vide on either side of the crack cutting of 6mm 'V' groove by inserting chicken mesh in gaps of wall PU filler material of reputed companies such as mastered builder solution, Fosroc. Alchemica, Dr Fixit, or equivalent make and finishing to the original shape as directed. The crack filling shall be carried out as per the OEM specifications specified by the OEM and the material to be used shall be freshly manufactured having a minimum life span of six months when brought out site. |
| 7 | Taking up or down steel tubing 25 or 32 mm dia pipe and connections, including cleaning for refixing or removal to CE store. |
| 8 | Taking up or down steel tubing 20 mm dia pipe and connections, including cleaning for refixing or removal to CE store. |
| 9 | Supplying and Filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level for 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level for Mild steel and Medium Tensile steel bars. |
| 13 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 mm internal dimensions |
| 14 | Providing and constructing Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 15 | CEMENT PLASTER (IN FINE SAND) in 15mm cement plaster of mix of 1:4 (1 cement: 4 fine sand) in walls |
| 16 | Supply and fixing of 4 mm thick glass pane (weight not less than 10 kg/sqm).Add Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) |
| 17 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete for 125x85x5.5 mm (heavy type) |
| 18 | Providing and fixing aluminium tower bolts 150x10 mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 19 | Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 20 | Providing and fixing 250x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete |
| 21 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 23 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid |
| 24 | Supply and Fixing of Health Faucet chromium plated (ESS YES VICTORIAN\\" make or suitably equivalent make). |
| 25 | Providing and fixing uplasticised PVC connection pipe 45 cm length with brass unions for 15 mm nominal bore |
| 26 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 for 15 mm nominal bore |
| 27 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 28 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. - 180x150 mm size P type - With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 29 | Supply and fixing of PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement. |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 31 | Providing and fixing of 20mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 32 | Providing and fixing of 15mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 33 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) for 20 mm nominal bore |
| 34 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete for 20 mm nominal bore. |
| 35 | S & F of PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors. |
| 36 | S & F of PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 37 | S & F of PVC bend with door 110mm dia (SWR) bends any radius. |
| 38 | S & F of PVC bend with door 75mm dia (SWR) bends any radius. |
| 39 | Providing & fixing false ceiling at heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (psrt 4)-1970 and light reflection of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specification, drawing and as per directions of the engineer-in-Charge. With Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles |
| 40 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board pre-laminated particle board with decorative lamination on both sides conforming to IS: 12823 Grade I type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc,. complete as per architectural drawings and directions of Engineer-In-charge. |
| 41 | M & L For Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc |
| 42 | Material and labour for Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 43 | M & L for Excavating post holes in hard/dense (or similar holes) each n exc 0.5 cu. m, getting out returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, |
| 44 | Earth work excavation hard/dense soil over areas not exceeding 1.5 m deep and getting out. |
| 45 | Material and labour for hard core(broken stone/boulders) of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cms thick watered and rammed to true surface. |
| 46 | Supply and Fixing of granite(of any colour) work (table rubbed and polished) 20mm thick to fixing on wash basin platform, in steps, jambs, pillars, window-cills, cooking platforms ,slab for flooring and like CM 1:4 including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite complete as directed. |
| 47 | Material and labour for Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 48 | S & F of Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water /moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EIC. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 49 | S & F of II class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. |
| 50 | Supply and fixing of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240. |
| 51 | S & F of vitreous china urinals, half stall type flat back of white including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinal back in cement. Including 32mm connector pipe, stop cock 15mm size with PTMT nuts 15mm PVC connections of length 300mm and waste coupling and removing old damaged urinal, 15mm dia pipe urinal spreader Minimum weight 60gms complete etc |
| 52 | S & F of PVC connections 15mm size with PTMT nuts of length 600mm |
| 53 | Supply and fixing PVC (SWR) vent cowl 110 mm dia. |
| 54 | Supply and fixing PVC (SWR) vent cowl 75 mm dia. |
| 55 | M & L for Concrete bed to drain pipes (150mm).in PCC Type C2 1:3:6 Including packing under, and haunching against the sides of pipes after they are laid and tested in |
| 56 | S & F of 150mm UPVC Pipes (SCH-80) laid in trenches and jointed as specified. |
| 57 | M & L for 225 mm(inner dia) Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required. |
| 58 | Removal of excavated (SOIL) debris materials to a lead exceeding 250 m but not exceeding 500 m and depositing where directed. |
| 59 | Material and Labour for Second class hard-wood in scantlings,Wrought Framed and fixed to roof position including removal of old scantlings if any and replacing after giving necessary support etc., |
| 60 | Dismantling of Existing Mangalore type roof and sticking for reuse |
| 61 | Material and Labour for II class hardwood Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed in repairs |
| 62 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 510x1040 mm bowl depth 250 mm |
| 63 | Providing and fixing Zebra blinds with fabric Finish with approved texture with top fixing brackets roller chains and finish as required at site |
| 64 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 65 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 66 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer in- charge. With stainless steel cover plate minimum 1.25mm thickness. |
| 67 | Material and labour for applying two coats of External / internal emulsion paint with one coat primer including preparation of old surfaces on internal wall of painted surfaces all complete. |
| 68 | Providing corrugated G.S. sheet roofing 0.63mm thick with zinc coating not less than 275gm/sqm including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. Limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to in any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 69 | Supply and fixing of Roof tiles, Mangalore pattern,interlocking at side joints, laid dry including replacing the old damaged mangalore tiles at height exceeding 5m from the ground level. |
| 70 | Material and labour for applying two coats of vanish / wood polish on old wooden Surfaces of any description, over 10cm in width or girth including one under coat and one finishing coat including preparation of old wooden surfaces |
| 71 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc |
| 72 | Dubbing out average 10mm thick on irregular face of walls in cement plaster in CM 1:4 |
| 73 | Supplying and placing in position Main Table & ERU of the following specifications. Its size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.ERU size shall be 1050 Width x 450 Depth x 705 Height. The top of Finesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.(Make:Godrej Interio or suitably Equivalent make) |
| 74 | Providing, supplying and placing of Mid Back Revolving Chair. SEAT/BACK ASSEMBLY: The seat base is made up of Mild steel frame. The seat is made up of PU form of density of 45 kg/m3, thickness >40<=50 seat upholstered using black mesh fabric. The Back with size >400<=450 should be made with injection moulded plastic, with upholstered using black mesh fabric and without headrest. SEAT SIZE: 50.0 cm (W) x 50.0 cm (D)BACK SIZE: 45.0 cm. (W) x 55.0 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° an d hardness 16 ± 2 kgf as per IS:7888 for 25% compressionARMRESTS: The adjustable armrest is designed with the following features• Adjustment-6 steps (8. 0 ± 0. Scm range)• Height adjustable armrest structure with Inner and top material with Polypropylene (PP).FIXED LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded injection moulded plastic.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features.• 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.• Multi position locking mechanism.• Tilt tension adjustment• Seat/back tilting ratio of 1.2Pneumatic/ hydrualic Height Adjustment: The pneumatic/ hydrualic height adjustment has adjustment stroke for 90mm.PEDESTAL ASSEMBLY: The pedestal is fabricated from 0.2 ± 0.02 cm thick HR sheet, mild steel chrome plated and 5 nos. twin wheel castors dia of 50mm. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. The product should be certified by BIFMA Level 2, IAQ Gold, GreenPro (Make:Godrej Interio or suitably Equivalent make) |
| 75 | Providing, supplying and placing of Visitor Chair. SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D)BACK ASSEMBLY: The back assembly should be made of powder coated (OFT 40-60 microns) tubular frame of 2.54 ± 0.03cm x 0.2 ± 0.016cm thick. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE: 46.5 cm(W) x 60.5cm(H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.ARM RESTS: The one-piece arm rests should be injection moulded from black Co-polymer Polypropylene. .TUBULAR FRAME: The powder coated (DFT 40-60 microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm x 0.2 ± 0.016 cm thick M.S.E.R.W Tube. Overall Dimensions of Chair:Seat Height - 46.5cm, Height - 93.5cm. Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm. The product should be certified by BIFMA Level 2, IAQ Gold, GreenPro & GRIHA (Make: Godrej Interio or suitably Equivalent make). |
| 76 | Providing steel cupboard 7' high. (Make: Godrej Interio or suitably Equivalent make). |
| 77 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. a)one light point or one fan point controlled by one switch with cables1.5 sqmm size. |
| 78 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. b)One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size. |
| 79 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. c)One 3 pin socket outlet 5 amps on independent with cables 2.5 sqmm size. |
| 80 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit a) 2x1.5 Sqmm + 1x1.5 Sqmm earth wire |
| 81 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit a) 2x2.5 sqmm + 1x2.5 sqmm earth wire |
| 82 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit b) 2x4.0 sqmm + 1x4.0 sqmm earth wire |
| 83 | Material and labour for Brick walls cutting chases, pining in, making good to facing where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed conduit wiring, etc., and making good,cutting exc. 10 cm but not exc. 20 cm girth. |
| 84 | Material & Labour for connecting to the system modular type switches 6A single pole one way one module (Make:,LEGRAND /ANCHOR/ Litaski/ Crabtree or Suitably equivalent make) |
| 85 | Material & Labour for connecting to the system modular type switches 16A single pole one way one module (Make:,LEGRAND /ANCHOR/ Litaski/ Crabtree or Suitably equivalent make) |
| 86 | Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably equivalent make) |
| 87 | Supply, fixing and connecting to the system of socket, 16A-2/3 pin combined modular type 2 module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably equivalent make) |
| 88 | Supply and fixing of exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers |
| 89 | Supply and fixing ceiling fans complete with blades, down rods, electronic Regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star, rated Copper winding with brushless direct current motor (BLDC) Make: HAVELLS/CGL/AUTOMBURG/LUKOR or suitable equivalent make as approved by EIC |
| 90 | Supply and fixing of modular Fan step regulator, 120W - 2 module |
| 91 | Supply and fixing of single pole and neutral enclosure with a two pins and earth plug and socket complete with one single pole MCB 20 amps, 240V Make: Standard/Havells/Siemens/ Legrend or Suitably Equivalent Make. |
| 92 | Supply & fixing of 3 module modular white cover plate with frame |
| 93 | Supply & fixing of modular metal flush box for 3 module plate |
| 94 | Supply & fixing of 6 module modular white cover plate with frame |
| 95 | Supply & fixing of modular metal flush box for 6 module plate |
| 96 | Material & Labour for ceiling rose, 3 Phase/PVC/polycarbonate, isolated body. |
| 97 | Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB's when MCB'S to be used single pole & neutral 8 way with 200 Amps rated busbar, 240V (Make: Legrand / Havells / ABB or Suitably Equivalent Make.) |
| 98 | Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB's when MCB'S to be used Triple pole & neutral 6 way with 200 Amps rated busbar,415V (Make: Legrand/Havells/Hager/ABB) or suitably equivalent make |
| 99 | Supply and fixing of SP 6 to 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (Make: ABB/Legrand/ Havells/Hager) or Suitably equivalent make |
| 100 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. SPN 40 to 63 AMP (Make: ABB/Legrand/ Havells/Hager or Suitably Equivalent Make.) |
| 101 | Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. TP (Triple pole) 25 To 63 AMP (Make: legrand/ havells/ ABB or Suitably Equivalent Make.) |
| 102 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete (Make: Havells/ Philips/ Wipro/ Bajaj/ CG/ Luker or Suitably Equivalent Make.) |
| 103 | Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 104 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 105 | Materials & labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm, 3.5 core |
| 106 | Excavating hard/dense soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable. |
| 107 | Material & labour for sand filling for cushioning on U.G cable |
| 108 | Material & labour for Bricks; common burnt clay building bricks sub class B designation 75, old size for protection to U.G cable |
| 109 | Returning, refilling hard/dense soil in the excavated trench after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm. |
| 110 | Demolition of cement concrete (unreinforced) of any description and in any position |
| 111 | Material and labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete |
| 112 | Excavating in hard / dense soil in trenches, exc 1.5 m and n exc 3.0 m in width and depth and getting out. |
| 113 | Material & Labour for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead 32 x 6 GI strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including earth electrode pipe, Funnel, charcoal, salt, earth PCC pit with cover and testing on completion |
| 114 | Supply and install hi wall split units indoor /outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR. |
| 115 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, removing materials HANDOVER to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. |
| 116 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) |
| 117 | Supply and fixing of LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. (Make: PHILIPS /GE/ WIPRO /CG/ HAVELLS) or Suitably Equivalent Make. |
| 118 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make: PHILIPS /GE/ WIPRO /CG/ OSRAM / BAJAJ/ HAVELLS/ SYSKA or Suitably Equivalent Make. |
| 119 | Online UPS - Input supply: Single Phase, Output Supply: Single Phase. Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply.(As per Annexure 1) 6 Kva capacity |
| 120 | Supply and fxing of LED ceiling/Recessed mounting fitting complete with suitable LED lamp and accessories,Wattage 24 to 30 watts and minimum system output 1800 lumens. Make: PHILIPS / Bajaj /CG /Havells / Wipro or Suitably Equivalent Make. |
| 121 | Supply of Recessed Mounted circle/square type Luminarie, 15 Watts with suitable LED lamp and accessories, minimum system output: 1000 lumens. Make: PHILIPS/Bajaj/CG/Havells/Wipro or Suitably Equivalent Make. |
| 122 | Supply & fixing metal flush box for 8 module plate |
| 123 | Supply & fixing of 16 module plate with frame and metal flush box |
| 124 | Supply & Fixing of 12 module, polycarbonate modular white cover plate with frame and metal flush box. Make: Anchor/Havells/Llegrand or suitably equivalent. |
| 125 | Supply & Fixing of modular type Dummy plate. |
| 126 | Material & Labour for LT cable end termination with gland and copper lugs suitable for 3.5 core 35 sqmm XLPE cable. |
| 127 | Supply and fixing of name board of AVNL size 3 ft x 3 ft with logo Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender