Tender For Repair To Sign Board Road Furniture And Parapet Wall Under Age(I) Lansdowne.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
20 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Sign Board Road Furniture And Parapet Wall Under Age(I) Lansdowne.
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repair direction sign board of any size with 4 mm thick aluminum composite panel comprising both side high intensity prismatic grade retro reflective sheeting of 3M as base and with cut out message (legends borders letters / numerals/logo etc) height of letters up to 150 mm & letters up to 40 nos/sqm as directed with high intensity prismatic grade retro reflective sheeting both side of boards with epoxy powder coating, including fixed over framed work of stainless steel square hollow section including excavation and PCC (1:3:6) type C2 of size 450x450x450 mm completed all as specified and directed. Note:-Rate of pedestal (vertical stand is not included in this item and same will be paid saperately under Item No 8) |
| 2 | Supply and fix in repair Solar delineator LED with cage and pole height 1000 mm, size of pole delineator 50 mm outer dia height of body (top) size 70 mm x70 mm x100 mm and to be imbeded in PCC (1:2:4) type B1 of size (200x200x200)mm Power Source High-efficiency solar panel (mono or polycrystalline), battery rechargeable NiMH battery (typically 1.2V or 2.4V) LEDs Super bright LEDs (Red) Visibility Up to 1 kilometer, Operating mode automatic dusk-to-dawn operation (flashing or steady light, often customizable) Body Material, Durable, UV-resistant Polycarbonate (PC) and ABS plastic, Weather Resistance, Waterproof and weatherproof design, typically IP65 or IP67 rated, Backup Time, 36-60 hours of operation after a full charge complete all as specified. |
| 3 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed |
| 4 | M&L preparation of PCC road surfaces and applying thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat over one coat of primer to adjoin the old PCC road as in centre line, edge line, zebra crossing and stop lines etc. Width of road marking 150/100mm using 'HOT MARK' thermoplastic paint (Hot application) white or yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blender, glass beads, titanium dioxide, calcium carbonate, inter fillers etc, thermoplastic requirement for glass beads shall be conforming to BS- 6086 of MORTH specification including spraying of glass beads @ 300 Gms/Sqm etc all as per manufacturer's instructions complete all as specified and as directed. |
| 5 | S&F in repair Plastic Speed Bump which are highly resistant to severe impacts and harsh weather condition. Its interlocking sub units make it bind perfectly into a one firm bump.the per-colored material (Black/Yellow) and UV stabilizers keep themperpetually colorful, Studded with reflectors on either side, they are clearly visible to the motorists during night. It is made of PE plastic material. Its fixing with metallic bolts/MS stud/Anchor fashner and suitable adheshive are used for installation on road . Available in Yellow and Black colours. Dimensions: L=730mm, width 245 mm & Height= 70 mm ; to be installed as per the directions of Engineer -in-charge. Model- Dark Eye-DA 1006 / or equivalent. |
| 6 | S&F convex mirror 1200 mm size made of PC material & FRP material is used in making brim & back holding plates with suitable corrosion free with necessary fixing arrangement including fix the mirror at necessary height as per site requirement, meant for road turning, intersections, curves, \\"T\\" junctions, parking lots etc. ideal for surveillance, have clear and definite mirror image, complete all as specified & directed. Note:-Rate of pedestal (vertical stand is not included in this item and same will be paid saperately under Item No 8) |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 8 | M&L for stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 9 | M&L for preparation of old painted surface of concrete road side kerbs stone of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 10 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 11 | M&L for walling of random rubble masonary, well bonded, bedded and solidly hearted, brought upto courses, built in cement mortar (1:6) complete all as specified and directed.Note :- Only quantity of PCC bond stone to be deducted from quantity of random rubble masonary. |
| 12 | Description same all as item No. 11 above but except stone complete all as specified and directed. Note :- Old retreived serviceable stone under demolition item shall be used. |
| 13 | M&L for PCC (1:2:4) type B-1, using 20 mm graded stone aggregates, as in roof kerb/ benching/ coping, bed plates, for fixing of hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. |
| 14 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surfacae not exceeding 40mm to face stone for Lime or sand stone and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses complete all as specified and directed. |
| 15 | M&L for raised pointing in cement mortar (1:4) to random rubble or polygonal rubble masonary uncoursed or brought upto course complete all as specified and directed. |
| 16 | M&L for 15 mm thick plastering on fair faces of stone surfaces, in CM (1:6), surface finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | Supply Only PVC Raod Barrier 1000 mmx800mmx500mm durable red colour to fill water/sand and interlock system complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender