Tender For Construction Of Road From Rongchirum Tiniali To Chandrasing Terang Residence Of Rongjakve.
Tender Value
78.59 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
16 days left
EMD
1.57 Lakhs
Bank guarantee accepted
Document Fee
1572
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karbi Anglong → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Road From Rongchirum Tiniali To Chandrasing Terang Residence Of Rongjakve.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps ofsuch trees cut earlier and disposal of unserviceable materials and stacking ofserviceable material to be used or auctioned, upto a lead of 1000 m includingremoval and disposal of top organic soil not exceeding 150 mm in thickness asper Technical Specification Clause 201. (ii) By Mechanical MeansIn (a) area of non-thorny jungle |
| 2 | Construction of embankment with approved material obtained from borrow pitswith a lift upto 1.5 m, transporting to site, spreading, grading to required slopeand compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto1000 m as per Technical Specification Clause 301.5 (i) Private Land |
| 3 | Construction of subgrade and earthen shoulders with approved material obtainedfrom borrow pits with all lifts and leads, transporting to site, spreading, grading torequired slope and compacted to meet requirement of Table 300.2 with lead upto1000 m as per Technical Specification Clause 303.1. (i) Private Land |
| 4 | Construction of granular sub-base by providing well graded material, spreading inuniform layers with motor grader on prepared surface, mixing by mix in placemethod with rotavator at OMC, and compacting with smooth wheel roller toachieve the desired density, complete as per Technical Specification Clause401. (ii) For Grading II Material |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizesto water bound macadam specification including spreading in uniform thickness,hand packing rolling with smooth wheel roller 80-100 kN in stages to properhand packing, rolling with smooth wheel roller 80-100 kN in stages to propergrade and camber, applying and brooming, stone screening/binding materials tofill-up the interstices of coarse aggregate, watering and compacting to therequired density grading 2 as per Technical Specification Clause 405. (A) By Manual Means |
| 6 | Providing, laying, spreading and compacting stone aggregates of specific sizesto water bound macadam specification including spreading in uniform thickness,hand packing, rolling with smooth wheel roller 80-100 kN in stages to propergrade and camber, applying and brooming, stone screening to fill-up theinterstices of coarse aggregate, watering and compacting to the required densityGrading 3 as per Technical Specification Clause 405. (A) By Manual Means |
| 7 | Providing and laying interlocking concrete block pavement with M40 grade gradeof concrete blocks having thickness 80mm as per technical specification clause1504 complete including carriage. a) Including Edge block/ Edge restraints |
| 8 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatorysign as per IRC:67 made of encapsulated lens type reflective sheeting videClause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on amild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground bymeans of properly designed foundation with M15 grade cement concrete 450 mmx 450 mm x 600 mm, 600 mm below ground level as per drawings and TechnicalSpecification Clause 801. 600mm equilateral triangle |
| 9 | 600mm circular |
| 10 | 800mm x 600mm rectangular |
| 11 | Providing reflective pavement marker with Micro prismatic lens in bothdirection having thermoplastic body adhering to the specification andguidelines of MoSRT&H’s fixed to the road surface using the adhesivesand the procedures recommended by the manufacturers with threemonths replacement warranty and free maintenance. |
| 12 | Extension of Single opening 600 mm dia NP3 HPC |
| 13 | Construction of Toe wall |
| 14 | Retaining wall Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender