Tender For Construction Of Road With Icbp At Rongcheklam.
Tender Value
60 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
16 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
1200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karbi Anglong → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Road With Icbp At Rongcheklam.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps ofsuch trees cut earlier and disposal of unserviceable materials and stacking ofserviceable material to be used or auctioned, upto a lead of 1000 m includingremoval and disposal of top organic soil not exceeding 150 mm in thickness asper Technical Specification Clause 201. (ii) By Mechanical Means (a) In area of non-thorny jungle |
| 2 | (II) Excavation in Hilly Areas in Soil by mechanical means Excavation in soil in Hilly Area by mechanical means including cutting andtrimming of side slopes and disposing of excavated earth with a lift upto 1.5 mand a lead upto 20 m as per Technical Specification Clause 1603.1 |
| 3 | Construction of RCC drain |
| 4 | Construction of Pucca drain |
| 5 | Construction of Toe wall |
| 6 | Construction of embankment with approved material obtained from borrow pitswith a lift upto 1.5 m, transporting to site, spreading, grading to required slopeand compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) Private Land |
| 7 | Construction of subgrade and earthen shoulders with approved material obtainedfrom borrow pits with all lifts and leads, transporting to site, spreading, grading torequired slope and compacted to meet requirement of Table 300.2 with lead upto1000 m as per Technical Specification Clause 303.1. (i) Private Land |
| 8 | Construction of granular sub-base by providing well graded material, spreadingin uniform layers with motor grader on prepared surface, mixing by mix in placemethod with rotavator at OMC, and compacting with three wheel 80-100 kNstatic roller capacity to achieve the desired density, complete as per TechnicalSpecification Clause 402 (ii) Gravel/Soil - Agreegate base. Grading -B |
| 9 | Providing, laying, spreading and compacting stone aggregates of specific sizesto water bound macadam specification including spreading in uniform thickness,hand packing, rolling with smooth wheel roller 80-100 kN in stages to propergrade and camber, applying and brooming, stone screening to fill-up theinterstices of coarse aggregate, watering and compacting to the required densityGrading 3 as per Technical Specification Clause 405. (A) By Manual Means |
| 10 | Providing and laying interlocking concrete block pavement with M40 grade gradeof concrete blocks having thickness 80mm as per technical specification clause1504 complete including carriage. (a) Including Edge block/ Edge restraints |
| 11 | Road Marking with Hot Applied Thermoplastic Compound withReflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mmthick including reflectorising glass beads @ 250 gms per sqm area,thickness of 2.5 mm is exclusive of surface applied glass beads as perIRC:35 .The finished surface to be level, uniform and free from streaksand holes and conforming to the MoSrt&H specifications |
| 12 | Providing reflective pavement marker with Micro prismatic lens in bothdirection having thermoplastic body adhering to the specification andguidelines of MoSRT&H’s fixed to the road surface using the adhesivesand the procedures recommended by the manufacturers with threemonths replacement warranty and free maintenance. |
| 13 | Providing speed breaker |
| 14 | Providing and fixing of typical PMGSY informatory sign board with Logo as perMORD specifications and drawing. Three MS Plates of 1.6 mm thick, top andmiddle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x5mm. The angle iron frame of the lower most plate and flat iron frame of middleplate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts dulyembedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm,600mm below ground level. The top most diamond plate will be welded to middleplate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stoveenameled on both sides. Lettering and printing arrows, border etc. will bepainted with ready mixed synthetic enamel paint of superior quality in requiredshade and colour. All sections of framed posts and steel tube will be painted withprimer and two coats of epoxy paint as per drawing Clause 1701 and Annexure1700.1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender