Tender For Execution Of Works Namely Providing Public Amenities Such As Toilets,Drinking Water,Baby Care Room, Pathways, Sinages, Benches, Dustbin, Etc.For Visitors Facility And Also Construction Of Boundary Wall At Menhirs At Lianpui Village, Dist-C
Tender Value
94.08 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
20 days left
EMD
2.35 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Champhai → Mizoram
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Works Namely Providing Public Amenities Such As Toilets,Drinking Water,Baby Care Room, Pathways, Sinages, Benches, Dustbin, Etc.For Visitors Facility And Also Construction Of Boundary Wall At Menhirs At Lianpui Village, Dist-Ch Hai, Mizoram For Fy 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Description or specification of items of |
| 2 | Clearing jungle including uprooting of rank vegetation, grass. brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 3 | Demolishing cement concrete manually/ by mechanical means induding disposal of material within 50 metres lead as per direction of Engineer - in - charge |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 5 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking wiffin 50 metres lead |
| 6 | Excavation work by mechanical means Hydraulic excavatory manual means in foundation trenches or drains (not exceeding 1 _5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1_5 m, including getting out the excavated soil and Ulsposal of surplus excavated soils as directed, within a lead of 50 nm |
| 7 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness. hand picking. rolfing with 3 nheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber. applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate. watering and compacting to the required density |
| 8 | P.C.C 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources 4 graded stone aggregate 20 mm noninal size derived from natural sources) |
| 9 | Coursed rubble masonry (first sort) with hard stone in foundation and plinth With Cement mortar (1 cement : 6 coarse sand) |
| 10 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS 15622 of approved make in all colours and shades in for outdoor floors such as footpath. court yard, multi modals location etc, laid on 20 mm thick base of cement mortar (1 cement 4 coarse sand) in all shapes & patterns inducfing grouting the joints with white cement mixed Vith matching pigments etc. complete as per fiection of Engineer-in-Charge. |
| 11 | Reinforced cement concrete work in walls (any thickness). including attached pilasters. buttresses. plinth and string courses. fillets. columns. pillars. piers, abutments. posts and struts etc. above plinth level up to fioor five level. excluding cost of centering, shuttering, finishing and reinforcement 1:1.53 (1 cement : 1.5 coarse sand(zone.lll) derived from natural sources 3 graded stone aggregate 20 rnm nominal size derived from natural sources) |
| 12 | Steel reinforcement for R.C.C. work including straightening. cutting, bending, placing in position and binding all complete upto plinth level ,Mild steel and Medium Tensile steel bars |
| 13 | Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125 mm thick with Grade-I AAC blocks of density 551 to 650 kg/cum conforming to 13.2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar (1 cement 4 coarse sand The rate includes providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of masonry work |
| 14 | Supplying and filling in plinth wÄh sand under floors. including watering. ramming, consolidating and dressing complete |
| 15 | 20 mm cement plaster: 1:4 (1 cement : 4 coarse sand) |
| 16 | Cement plaster (1 cement: 3 coarse sand) finished with a floafing coat of neat cement. 20 mm cement plaster |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than O 08% and conforming to IS: 15622, of approved make. in all colours and shades. laid on 20 mm thick cement mortar 1 (1 cement 4 coarse sand). jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete |
| 18 | Providing and fixing 1st qualfty ceramic glazed floor tiles conforming to IS • 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy bottle green, black of any size as approved by Engineer-in-Charge in skirting. risers of steps and dados over 12 mm thick bed of cement Mortar (1 cement 3 coarse sand) and jointing with grey cement slurry@33kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 19 | Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level. over first dass kail wood strips 25x6 mm Vith 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately). Flat surfaces |
| 20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. EPDM rubber / neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) With fioat glass panes of 4.0 mm thickness (weight not less than 1 O kg tsqm) |
| 21 | Shutters of doors. windows & ventilators includng providing and fixing hinges} pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated alunülium (minimum thickness of powder coating 50 micron) |
| 22 | Providing wood work in frames of doors. windows, derestory windows and other frames, wrought framed and fixed in position Vith hold fast lugs or •with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS 2202 (Part l) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 24 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (i 0.2 mm). with inbuilt decorative moulding edging on one side The styles and rails mitred and joint at the corners by means of M.S. galvanised plastic brackets of size 7Sx22C mm having wall thickness 1.0 mm and stainless steel screws The styles of the shutter reinforced by inserting galvanised M.S. tube of size 2500 mm and 1 mm 0.1 mm) wall thickness The lock rail made up of 'H' section. a uPVC hollow section of size 100x30 mm and 2 mm 02 mm) wall thickness fixed to the shutter styles by means of plastic} galvanised M S. •U' deats. The shutter frame filed with a uPVC multi- chambered single panel of size not less than 620 mm. having over all thickness of 20 mm and 1 rnn. 0.1 mm) wall thickness v The panels filed vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in- charge |
| 25 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) Vith stainless steel screws etc complete |
| 26 | Providing and fixing aluminium sliding door bolts. ISI marked anodised (anodc coating not less than gradeAC IO as per IS . 1868). transparent or dyed to required colour or shade, with nuts and screes etc. complete |
| 27 | Providing and fixing aluminium tower bolts. ISI marked. anodsed (anodic coating not less than grade AC 10 as per IS 1368 ) transparent or dyed to required colour or shade, with necessary screws etc, complete |
| 28 | Providing and fixing aluminium handles. ISI marked. anodised (anodic coating not less than grade AC 10 as per iS 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 29 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI. IS 3564. embossed on the body. door weight upto 35 kg and door vidth upto 700 mm). with necessary accessories and screws etc. complete |
| 30 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with fiat iron diagonals 20x5 mm size. with top and bottom rail of T-iron 40x40x6 mm. with 40 mm dia steel pulleys, complete with bolts. nuts. locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer |
| 31 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 32 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 Itr/10 sqm over and including one coat of Special primer applied @ 0.75 Itr /10 sqm |
| 33 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 Itr/10 sqm over and induding priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 34 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 35 | Providing and fixing precoated galvanised iron profile sheets (size. shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0 45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277. in 240 mpa steel grade. 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns, Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling 'self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces. excluding the cost of purlins, rafters and trusses and cutting to size and shape wherever required |
| 36 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 rnictons using self drilling/ self tapping screws complete. Ridges plain (500 - 600mm) |
| 37 | Providing and fixing M.S. grils of required pattem in frames of windows etc with M.S. fiats. square or round bars etc. including priming coat with approved steel primer all complete |
| 38 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat [email protected] Itri10 sqm over an under coat of primer [email protected] Itri10 sqm of approved brand and manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat [email protected] Itri10 sqm over an under coat of primer [email protected] Itri10 sqm of approved brand and manufacture |
| 39 | Centering and shuttering including strutting, propping etc and removal of form for Lintels. beams, plinth beams, girders, bressumers and cantilevers |
| 40 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre. horizontal & vertical tubes joining with cup & lock systemwith M.S. tubes, M.S. tube challies, MS. clamps and MS staircase system the scaffolding for working platform etc and maintaining it in a serviceable condition for the required duration as approved and removing it there aner The scaffolding system shall be stiffened with bracings, runners, connection with the building etc v,herever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes. having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching. refilling & testing of joints complete as per direction of Engineer in Charge(25 mm dia pipe |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes. having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching. refilling & testing of joints complete as per direction of Engineer in Charge( 15 mm dia pipe) |
| 43 | Providing and fixing wash basin with C.I. brackets. 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern. inclu&g painting of fitings and brackets. cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 5S0x 400 nun with single 15 mm C.P. brass pillar tap |
| 44 | Providing and fixing vhite vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 45 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing |
| 46 | Providing and fixing of plumbing items for toilets ,drinking water and baby care room etc (details are in sl.No. 45.01 to 45.13 ) |
| 47 | BIB COCK ( CP BRASS BRANDED) LONG NOSE |
| 48 | BIB COCK BRANDED TWO WAY |
| 49 | CP BRASS ANGLE STOP COCK BRANDED |
| 50 | HEAVY DUTY CONNECTION PIPE OF SIXE 450-600 MM |
| 51 | SS WASTE COUPLING FOR WASH BASIN |
| 52 | JET SPRAY |
| 53 | SS U-SHAPED GRAB BAR FOR DIVYANG TOILET |
| 54 | WATER HEATER 10 LTRS CAPACITY BRANDED |
| 55 | UPVC WALL VALVE 25 MM |
| 56 | SS GRAB BAR 12 INCHES, C-SHAPED |
| 57 | SS TOWEL RAIL N (45 CM TO 60 CM LENGTH) |
| 58 | SS DOUBLE COAT HOOK |
| 59 | TOILET PAPER HOLDER |
| 60 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid. 10 litre low level white vitreous china flushing cistern & C.P flush bend with fittings & C.I brackets. 40 mm flush bend, overflow arrangement Vith specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets. cutting and making good the wans and floors nherever required WC. pan with ISI marked white solid plastic seat and lid |
| 61 | Providing and fixing white vitreous china fiat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x26S mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete. includng painting of fittings and brackets. cutting and making good the walls and floors wherever required One urinal basin with 5 litre white PVC automatic flushing cistern |
| 62 | Supplying and fixing of U-PVC pipes (working pressure 4 kg I cm2) Single socketed pipe 110 mm dia |
| 63 | Supplying and fixing of U-PVC pipes (working pressure 4 kg I cm2) Single socketed pipe 75 mm dia |
| 64 | Provision for supplying SS benches of length 1.5 to 2.00 meter for visitors with approved design by the engineer in charge including transportation, fitting & fixing charges, GST and all taxes etc completed and approved brand and manufacture including transportation, fitting & fixing, etc all complete as per direction of the Engineer incharge |
| 65 | Provision for supplying & fixing of Stainless Steel perforated Swing Dustbin in. -80 - 100 Liter capacity )squared/ round shape silver color with approved quality & brand by the engineer in-charge for proper disposal waste management at site including transportation, GST and all taxes etc completed.(S.S pole & cap of size 50 mm dia NB ) |
| 66 | Supplying & fixing of Baby Diaper changing station (wall mounted folding ) of heavy duty (20 to 25 kg capacity) equipped with safety belt to secure baby when changing dipper as per approved brand & quality with transportation, fitting & fixing charges, installation, GST, and all taxes etc all complete as per direction of the Engineer in-charge.(Approx. dimension=H-570mm,W855 mm,D 95 mm ) |
| 67 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.(2x2.5 sqmm) |
| 68 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 69 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 70 | Supplying and installation of one heavy duty water pump(1.5HP/2HP) including of a starter and all accessories etc complete |
| 71 | Provision for supplying & fixing of electric items necessary for Baby care room, Drinking water, baby care room etc (details are in Sl.No. 57.01 to 57.18 ) |
| 72 | Modular switch 6A |
| 73 | Modular switch 16A |
| 74 | Modular switch socket 6A |
| 75 | Modular switch socket 16A |
| 76 | SS combined 16A |
| 77 | Batten holder |
| 78 | Fan regulator (step) |
| 79 | Celling fan branded 48mm |
| 80 | Celling light (6/6 inch) |
| 81 | Exhaust fan 12'' |
| 82 | LED bulb 12-15W |
| 83 | Modular switch box 8 modal |
| 84 | Modular switch box16 modal |
| 85 | Modular plate 8 modal |
| 86 | Modular plate 6 modal |
| 87 | Modular box 12 modal |
| 88 | Modular plate 12 modal |
| 89 | Branded double poll MCB/insulator 63AMP with box |
| 90 | Supplying and fixing of 25 W LED solar street light (branded) with solar panel upto 8 to 10 hours back up with remote system (4000 lumens)bright light output lithium battery inside and all weather protection with all accessories having minimum one year warranty including transportation, fitting & fixing charges at work site and installation with 6 meter G.I pole/MS pole of OD 76 mm(Medium Pipe) with painting etc including GST & all other taxes etc all complete as per direction of engineer in charge. |
| 91 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding grinding. buffing. polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete. i/c fixing the railing with necessary accessories & stainless steel dash fasteners . stainless steel bolts etc.. of required size. on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts. bolts. fasteners etc.) |
| 92 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet. Face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - Ill of ASTM-D4956-t)1 as approved by Engineer-in-charge. letters. borders etc as per IRC 67-2001 in silver white with blue colour back ground and with high intensity grade. pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-49S6-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures. Including the cost of painting with tw'0 or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat The rate includes the cost of rounding of the corners, lowering down the structural frame work from the gantry. Fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately rectangular area of the sheet only shall be measured for payment) Overhead informatory road signage |
| 93 | Providing and laying gang saw cut 18 mm thick mirror polished pre molded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath. flooring cut granite stone of required size and shape of approved shade. Colour and texture in footpath. flooring in road side plazas and similar locations. Laid over 20 mm thick base of cement mortar 154 (Icement 4 coarse sand) including grouting the joints with white cement mixed with matching pigment. Epoxy touch ups etc complete as per direction of Engineer-in-Charge wIth granite stone of area less than 0.50 sqm |
| 94 | Provision for writing of signage board (CNB) by engraving over granite stone including necessary colour/ink etc complete |
| 95 | Providing and fixing multilingual smart digital audio guide with design , development and hosting of QR Code engraving on stainless steel ( Grade 304) plate and stand with S.S hollow pipe and base plate including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts etc. complete, as per direction approval of Engineer-in charge |
| 96 | Supplying and fixing of curtains including all necessary fitting of fixing etc for baby care room as per direction of engineer in charge |
| 97 | Supplying and fixing of branded iron removal double (2 stage of sediment bag filter and iron remover filter) water filter including all accessories and one external iron removal kit etc |
| 98 | Supplying and fixing of Polyethylene water storage tank with cover and suitable locking arrangement etc complete as per direction of engineer in charge |
| 99 | Supplying and fixing of branded LED street / Flood light (30 to 50 Watt) including all accessories such as MS pole, underground pipe, Wire etc. (one set for two nos.) |
| 100 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±lmm), with wall thickness 2.0 mm (± 0.2 mm), comers of the door frame to be Jointed with galvanized brackets and stainless steel scree'S, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized MS. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer- in-charge Extruded section profile size 42x50 mm |
| 101 | Supplying and fixing of s.s water cooler stroage capicity 60/120 ltr FSS-120 ltr (Normal and cold water coolerand two dispenser tap) as per approved brand & quality with transportation, fitting & fixing charges, installation, GST, and all taxes etc all complete as per direction of the Engineer in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender