Tender For Repair Of Hand Pump At Various Locations Under Sub Division Anoopgarh
Tender Value
4.73 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
2 days left
EMD
9460
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair Of Hand Pump At Various Locations Under Sub Division Anoopgarh
BOQ
| Sl. No. | Item Description |
| 1 | Construction of tube well from ground level and up to 100 mtr. depth and above of following sizes in all types of soils in alluvium strata, unconsolidated formation such as pebbles, boulders etc. by bailing method and without gravel packing as per IS:2800 Part 1: 1991 and IS:2800 art II: 1979 (both amended up to date) and technical specifications. The work includes formation of cavity at bottom by development with appropriate air compressor or bailer pumping and also lowering of casing pipe but excluding cost of the casing pipe. The tube well should have a throughout bore as per nominal dia of casing pipe. The work would be completed after obtaining sand free water. Nominal bore 100 mm dia. |
| 2 | Providing and Lowering of ISI mark Medium well PVC-U casing and screen pipe (CM) as per IS : 12818 : 2010 or amended up to date having pipe thickness as per IS code suitable for bore well with threading , winding with superior quality of plastic mesh & rope in three layers with end cap complete as per technical specification and direction of Engineer In charge. 100 mm dia |
| 3 | Supply & installation of GI pipe 32 mm medium class “B” with pipe sockets (heavy duty). |
| 4 | Taking out of complete assembly including 32 mm GI pipe, 100 mm MS pipe cylinder & GS strainer from abandoned hand pump by digging 60 cm dia wall upto required depth and liftingthe assembly complete, This work includes the re fillingof well by earth complete |
| 5 | Providing 32 mm dia GS strainer made of GI pipe class - B with 10-12 mm dia hole with maximum spacing 12 mm covered with brass jali 150 mesh in one sq inch weighing 730 gm/sqm in 2 folds and one brass covered weighing 640 gm/sqm over it. One end with GI socket. |
| 6 | Repairing of India mark - II hand pump without providing spare parts including cutting of all necessary spare parts in supplied by the department labour rate complete job including taking out inner GI pipe 32 mm dia cylinder assembly strainer complete, carrying out necessary repair, all assembly to be reinstalled complete in all respect. |
| 7 | Boring of 80 mm dia bore hole for installation of repaired/new filter of 1.50 m to 2.00 m length. |
| 8 | Minor Repair without unlowering and lowering of assembly pipes (Replacement or Repair of Chain, Handle, Handle Assembly, Water Tank, Bearing, Greasing etc.including welding and lathe work if any.) |
| 9 | Major Repair with unlowering and lowering of 32/ 50 mm GI pipes assembly including minor repair if any. Work also includes transportation of all material from store to work point and depositing unservicable material to store. Work can be done by lowering machine/ chain pulley/ any system. |
| 10 | Repair of handpump when pipe assembly is jammed/fallen in the bore and to be taken out with help of tripod and chain pulley block etc. |
| 11 | Removing abandoned handpump including dismantling of platform, cutting of casing pipe minimum upto 0.3 m depth below ground level , depositing taken out material to store, filling bore with stone or earth and surface dressing. |
| 12 | Welding of Dry/Abandoned Borewell at site by 12 mm thick Round Sheet MS Sheet |
| 13 | Painting and writing of code on all Type sources (Hand pump/single phase/tubewell/Ow) of various rural /Urban water supply schemes The Code number of Source shall be based on District code/Block(sub District) Code /Village code/Type of source ie(HP/TW/SP/OW)/Source No.The Minimum Size of letters painted for coding shall be preferably 10X20 mm (width 10 mm and Height 20 mm) |
| 14 | P & F brass jali of 150 mesh (in one sq inch) wt. 750 gm per sqm in two folds including one jali over it weighing 640 gm per sqm. One end open and another plugged with cast iron conical shop 1 50 m lone strainer having length 1.20 m to 1.30 m. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender